A high dense metal plasma can be produced by using cathodic vacuum arc discharge technique.
利用阴极真空弧放电技术能够产生高密度的金属等离子体。
This dynamic body discharge technique eliminates body potential mismatches of PD SOI CMOS devices, achieving repeatable low threshold voltage and fast SRAM access time.
这种动态体放电的方法有效地解决了部分耗尽SOICMOS器件体电位不匹配的问题，得到了可重复性低阈值电压，提高了SRAM的读取速度。
Micro-hollow cathode discharge (MHCD) is a newly advanced micro-discharge technique based on ordinary cathode discharge in a sub-millimeter scale micro-hollow under high pressure.
微空心阴极放电(MHCD)是在普通空心阴极放电的基础上提出的一种高气压下亚毫米级微放电技术。
Micro-hollow cathode discharge (MHCD) is a newly advanced micro-discharge technique based on ordinary cathode discharge in a sub-millimeter level micro-hollow under high pressure.
微空心阴极放电(MHCD)是在普通空心阴极放电的基础上提出的一种高气压下亚毫米级微放电技术。
Research results show that corona discharge water vapor activation technique is effective and practical.
研究结果表明了电晕放电水蒸气活化技术是有效的和可行的。
Degradation of TNT wastewater by the electro - hydraulic discharge plasma technique was investigated.
利用液中放电等离子体技术对TNT模拟废水进行降解研究。
The indemnify technique about temperature, pressure of the density is one of the most important research issues in measurement of the discharge.
密度的温度、压力补偿技术是流量检测技术中的重要研究课题之一。
With improved Monte Carlo technique, the influence of a transverse field on the electron transport parameters in the cathode region of a DC glow discharge is studied.
本文运用改进的蒙特卡罗技术，研究了横向磁场对氦气直流辉光放电阴极区电子输运过程的影响。
The increase of image resolution can bring a brilliant prospects for the application of pulse discharge imaging technique in the engineering area.
成像清晰度的提高，为脉冲放电成像技术在工程上的应用奠定了基础。
With the technique, a reset circuit of automatic discharge for energy captured in the turn-off snubber capacitor is also presented.
结合此技术，还提出了关断缓冲电容器能量的自动放电复位电路。
In this paper, a glow discharge plasma source ion implantation technique is described.
本文叙述了辉光放电等离子体源的等离子体源离子注入。
For identifying various electrode polarization during discharge of nickel metal hydride battery, a transient technique current step method was employed.
利用暂态技术电流阶跃法对镍氢电池的正负极在放电过程中的电化学极化、浓差极化及欧姆极化进行了研究。
The phenomena in oil-pressboard surface discharge has been studied in detail by means of lichtenberg figure technique.
本文利用胶片电花图技术较深入地探索了油—纸沿面放电现象。
The core technique problems during wire cut electrical discharge machining in the inner conductor sheet were analyzed by this paper.
分析了板线内导体在利用数控电火花线切割加工中所遇到的工艺技术难题。
A new technique of electric discharge (Ed) milling insulating engineering ceramics has been recently developed by the authors.
绝缘工程陶瓷电火花铣削技术是作者开发出的一种新型加工技术。
A solar wafer slicing method was studied, which was based on complex dielectric fluid and efficiency electric discharge machining (EDM) and electric chemical machining (ECM) technique.
提出了一种基于复合工作液的、以电火花电解复合加工技术对太阳能硅片进行切割的工艺方法。
This paper introduces the plug removal principle of this technique and the effect of electric discharge on casing.
介绍了该技术井下放电解堵原理、放电对套管的作用。
An all - round description of the production technique of discharge printing on denim fabric is given.
介绍了牛仔布拔染印花的生产技术包括工艺条件及处方与注意点。
The results indicated that FDI has a positive impact on the scale effect & the technique effect of industrial waste water discharge, but not on the composition effect;
结果表明：FDI对工业废水排放量的规模效应为正、技术效应为正，而结构效应不显著；
A new technique had been developed for measuring discharge curves of dry cells as well as the electrode potential of MnO2 and Zn electrode potential and internal resistance simultaneously.
本文提出了测量电池放电电压曲线的同时测量二氧化锰电极电位，锌电极电位和电池内阻变化的新技术。
The Detecting Technique of Electrostatic Discharge is applied mainly in electrostatic hazard protection, fault diagnosis in high voltage power system.
静电放电探测技术是静电危害防护、高压电力故障诊断等领域的关键技术。
The models can be used to explain the discharge process of the capillary and provide theory for the parameters choices and technique design. It showed that the staged power supply...
理论模型较好地描述了毛细管电弧放电过程，为补偿脉冲发电机的参数选择和方案设计提供了理论依据。
The phase structure, morphology and electrochemical performance were analyzed using X-ray diffraction (XRD), scanning electron microscopy (SEM) and galvanostatic charge-discharge cycling technique.
利用X射线衍射（XRD）、扫描电镜（SEM）和恒电流充放电测试技术测试了制备样品的相结构、微观形貌和电化学性能。
And then a method of partial discharge monitoring based on pulse current and a technique of fault diagnosis based on the minimum distance method to stator winding are presented.
接下来提出采用脉冲电流法完成定子放电故障信号的采集，应用基于最小距离法对定子局部放电样本进行故障识别。
Partial discharge (PD) on-line detection can timely reflect the degradation degree of power apparatus, thus becoming a useful technique for condition monitoring and failure diagnosis.
局部放电在线检测可以及时反映电力设备绝缘老化情况，是状态监测和故障诊断的重要手段。
Partial discharge (PD) on-line detection can timely reflect the degradation degree of power apparatus, thus becoming a useful technique for condition monitoring and failure diagnosis.
局部放电在线检测可以及时反映电力设备绝缘老化情况，是状态监测和故障诊断的重要手段。
应用推荐