A efficient degreasing detergent for metals was prepared.
研制了一种高效金属脱脂剂。
Degreasing efficiency levels up to 94% in the optimum conditions.
在最佳试验条件下，脱脂率可达94 %以上。
Surface finish: Degreasing, rust, rust phosphating, powder coating.
表面处理：脱脂，除锈，防锈磷化，喷塑。
Has good emulsification ability and can be used for leather degreasing.
具有良好的乳化能力，可用于皮革脱脂。
Surface processing: degreasing, acid washing, phosphating, Static, powder coating.
表面处理：脱脂，酸洗，磷化，静电，喷塑。
Degreasing is one of the key processes to manufacture double faced sheepskin leather.
脱脂是毛革两用绵羊皮制造过程中一个关键工序。
Degreasing. High-temperature drying equipment produced, this product is rich in protein.
脱脂。高温烘干设备制作而成，本产品含有丰富的蛋白质。
Fewer faults may occur with solvent and then thermal degreasing than degreasing thermally only.
经溶剂脱脂再进行热脱脂产生的缺陷比直接热脱脂产生的缺陷要少得多。
The parts for heat treatment must be clean and degreasing treatment is requirement if necessary;
热处理部件必须清洁，如果有必要应进行脱脂处理；
Used as fur enzyme depilation, enzyme softening, both penetration, degreasing, descaling function.
用作毛皮酶脱毛、酶软化中，兼有渗透、脱脂及除垢的功能。
Fast barrel degreasing process has been widely adopted for pretreatment in electroplating industry.
滚光除油工艺在电镀业中应用广泛。
When designing a continuous type carburizing furnace, it is necessary to take account of degreasing.
连续式渗碳炉设计时，应考虑脱脂问题。
In the process of wool degreasing, a great amount of wastewater containing wool grease will be discharged.
在羊毛脱脂生产毛条工艺过程中，排出大量含羊毛脂的工业废水。
Only good degreasing before tanning will result in good tanning effect , which will bring about any good fashion desired.
只有前期好的脱脂，才有好的鞣制，最终才有所要的理想的各种产品风格。
Electrolysis degreasing, electrolysis pickling and straight line flooding fulling process are adopted while pre-treatment.
预处理采用电解脱脂、电解酸洗、直线溢流漂洗工艺。
The effects of degreasing, bath maintenance, material addition and operation conditions on the quality of deposits were discussed.
分析了除油、镀液维护、物料添加及操作环节对镀层质量的影响。
The optimum composition, which can be used in degreasing on steel and copper and aluminium alloys, was obtained by orthogonal design.
研制的复合脱脂剂可用于钢、铜合金及铝合金的脱脂除油。
A newly developed high efficient degreasing and rust removing solution for pre blackening treatment of high strength bolt is presented.
根据高强度螺栓发蓝工艺的独特性，研制适用工艺要求的常温除油除锈液，在生产中应用良好。
As diluent in paints and varnishes industries; solvent for metal cleaning and degreasing; textile printing solvent and dry cleaning solvents.
作为油漆及清漆制造用之稀释溶剂；金属清洗及脱脂用之溶剂；纺织印花用溶剂及可作衣物干洗用溶剂。
Sodium stearate and sodium palmitate produced by the reaction of saponifiable oil and alkali of degreasing solution were removed by filtration.
皂化性油和除油液中的碱作用生成的硬脂酸钠及棕榈酸钠采用过滤的方法排除；
A process for plating Sn on metal fasteners was introduced, including degreasing, halide Sn plating, oxidative blackening, polishing and varnishing.
介绍了一种金属钮扣电镀古锡的工艺，其主要工序包括除油、卤化物镀锡、氧化发黑、抛光、罩清漆等。
Spraying at the former, the basic surface cleaning, degreasing and surface roughness, such as spraying pretreatment process are an important process.
在喷涂前，对基本表面进行清洗、脱脂和表面粗糙化等预处理是喷涂工艺中一个重要工序。
The present situation and future trend about degreasing, surface conditioning, phosphorizing, passivating in car pretreatment are outlined in this paper.
本文将就轿车预处理工艺中应用的脱脂、表调、磷化、钝化等材料的最新情况和未来发展趋势进行概述。
Corrosion inhibitor must be added in sealing, sanding, degreasing and pickling to avoid over-corrosion, and sealing should be operated at low temperature.
电镀工艺中的封孔、振光、除油、酸洗等工序必须添加缓蚀剂，且低温封孔，以避免过腐蚀。
Since the wastewater contains large amount of degreasing cleaners, directly dispose will lead to the waste of detergent and the overburden of water treatment.
被排放的废水中仍然含有大量脱脂剂，如果直接排放将造成试剂的浪费，同时也为水处理增加了负担。
The pretreatment and passivation of zinc alloy parts were introduced. The pretreatment process includes polishing, degreasing and cleaning, activation and so on.
介绍了锌合金压铸零件的前处理工序及钝化工艺，前处理工艺包括抛光、脱脂除油、活化等。
The First Step (Degreasing) of the procedure is designed to remove dirt, dust, oil and grease. A water-soluble detergent is used to accomplish this, or a solvent.
第一步（去油）：去除污垢、灰尘、油和脂。使用水溶性去污剂或溶剂来完成该步骤。
In this paper, the degreasing mechanism in acid solution has been studied in terms of theory and practice. A new technological process of degreasing was proposed.
本文从理论和实践两个方面研究了在酸性溶液中的除油机理，提出了一种新型的除油工艺方法。
The degreaser of low temperature with low foam but excellent properties is developed through materials selection following the introduction of degreasing mechanism.
介绍了脱脂机理，通过对原材料选择，研制了一种性能优良的低温低泡脱脂剂。
The degreaser of low temperature with low foam but excellent properties is developed through materials selection following the introduction of degreasing mechanism.
介绍了脱脂机理，通过对原材料选择，研制了一种性能优良的低温低泡脱脂剂。
应用推荐