A efficient degreasing detergent for metals was prepared.
研制了一种高效金属脱脂剂。
It may be either used as degreasing agent or applied to general industrial washing.
既可作为脱脂剂，也可应用于一般的工业清洗。
Common degreasers and noticeable points during degreasing process are also introduced.
并对目前常用脱脂剂进行简要介绍，提出脱脂时的注意事项。
Fewer faults may occur with solvent and then thermal degreasing than degreasing thermally only.
经溶剂脱脂再进行热脱脂产生的缺陷比直接热脱脂产生的缺陷要少得多。
Fast barrel degreasing process has been widely adopted for pretreatment in electroplating industry.
滚光除油工艺在电镀业中应用广泛。
When designing a continuous type carburizing furnace, it is necessary to take account of degreasing.
连续式渗碳炉设计时，应考虑脱脂问题。
In the process of wool degreasing, a great amount of wastewater containing wool grease will be discharged.
在羊毛脱脂生产毛条工艺过程中，排出大量含羊毛脂的工业废水。
Electrolysis degreasing, electrolysis pickling and straight line flooding fulling process are adopted while pre-treatment.
预处理采用电解脱脂、电解酸洗、直线溢流漂洗工艺。
The effects of degreasing, bath maintenance, material addition and operation conditions on the quality of deposits were discussed.
分析了除油、镀液维护、物料添加及操作环节对镀层质量的影响。
The preparation method comprises the following steps of: (1) soaking the softwood in an alkali liquor to perform reflux degreasing;
制备包括：（1）将软木材浸泡在碱液中进行回流脱脂；
The optimum composition, which can be used in degreasing on steel and copper and aluminium alloys, was obtained by orthogonal design.
研制的复合脱脂剂可用于钢、铜合金及铝合金的脱脂除油。
A newly developed high efficient degreasing and rust removing solution for pre blackening treatment of high strength bolt is presented.
根据高强度螺栓发蓝工艺的独特性，研制适用工艺要求的常温除油除锈液，在生产中应用良好。
As diluent in paints and varnishes industries; solvent for metal cleaning and degreasing; textile printing solvent and dry cleaning solvents.
作为油漆及清漆制造用之稀释溶剂；金属清洗及脱脂用之溶剂；纺织印花用溶剂及可作衣物干洗用溶剂。
Metallurgical oxygen system pipe system, should use strict degreasing treatment, needle valve flange J29 Angle Pressure Gauge valve connection.
冶金系统中的氧气管路系统中，宜选用经过严格脱脂处理，法兰连接的针型阀。
A process for plating Sn on metal fasteners was introduced, including degreasing, halide Sn plating, oxidative blackening, polishing and varnishing.
介绍了一种金属钮扣电镀古锡的工艺，其主要工序包括除油、卤化物镀锡、氧化发黑、抛光、罩清漆等。
Nowadays cartridge degreasing methods mainly include physical heating, mechanical scraping, chemical washing, high pressure water washing and so on.
目前，可供选择的除油方法主要包括物理加热、机械刮除、化学清洗、高压水射流清洗等方法。
Spraying at the former, the basic surface cleaning, degreasing and surface roughness, such as spraying pretreatment process are an important process.
在喷涂前，对基本表面进行清洗、脱脂和表面粗糙化等预处理是喷涂工艺中一个重要工序。
The present situation and future trend about degreasing, surface conditioning, phosphorizing, passivating in car pretreatment are outlined in this paper.
本文将就轿车预处理工艺中应用的脱脂、表调、磷化、钝化等材料的最新情况和未来发展趋势进行概述。
Corrosion inhibitor must be added in sealing, sanding, degreasing and pickling to avoid over-corrosion, and sealing should be operated at low temperature.
电镀工艺中的封孔、振光、除油、酸洗等工序必须添加缓蚀剂，且低温封孔，以避免过腐蚀。
Since the wastewater contains large amount of degreasing cleaners, directly dispose will lead to the waste of detergent and the overburden of water treatment.
被排放的废水中仍然含有大量脱脂剂，如果直接排放将造成试剂的浪费，同时也为水处理增加了负担。
The pretreatment and passivation of zinc alloy parts were introduced. The pretreatment process includes polishing, degreasing and cleaning, activation and so on.
介绍了锌合金压铸零件的前处理工序及钝化工艺，前处理工艺包括抛光、脱脂除油、活化等。
In this paper, the degreasing mechanism in acid solution has been studied in terms of theory and practice. A new technological process of degreasing was proposed.
本文从理论和实践两个方面研究了在酸性溶液中的除油机理，提出了一种新型的除油工艺方法。
The results indicate that the practical values of this kind of neutral degreaser, including: low cost, environment protecting, and evidential effects of degreasing.
结果表明，此中性脱脂剂经济、环保， 除油效果好，具有很好的实用价值。
The influences of the content of PW and LDPE, the powder loading amount as well as the degreasing method on the shape holding in metal injection molding are investigated.
研究了石蜡(PW)和低密度聚乙烯(LDPE)的含量、粉末装载量和脱脂方法对脱脂保形性的影响。
The influences of the content of PW and LDPE, the powder loading amount as well as the degreasing method on the shape holding in metal injection molding are investigated.
研究了石蜡（PW）和低密度聚乙烯（LDPE）的含量、粉末装载量和脱脂方法对脱脂保形性的影响。
With the need increasement for hydrophilic foil for air conditioner, the effect of degreasing on aluminium foil surface is of great concern to hydrophilic foil manufacturers.
随着空调器亲水铝箔用量增加，铝箔表面的脱脂效果成为生产亲水箔厂关注的主要问题。
Pretreatment process for PVC laminating on different thin metal sheets was introduced. Formula, strengths and maintenance of degreasing and phosphating process were emphasized.
提出了一种适用于各种金属板贴塑的前处理工艺，着重介绍了脱脂和磷化的工艺配方、特点及槽液的维护。
Results showed they were not only possessed of the properties of penetration, level-dyeing and emulsifying degreasing, but also the actions of dissolving interfibrillar substance.
实验证明，NPS - 1和NPS - 2除具有渗透匀染或乳化脱脂作用外，还具有溶出皮纤维间质作用。
Results showed they were not only possessed of the properties of penetration, level-dyeing and emulsifying degreasing, but also the actions of dissolving interfibrillar substance.
实验证明，NPS - 1和NPS - 2除具有渗透匀染或乳化脱脂作用外，还具有溶出皮纤维间质作用。
应用推荐