Designing a floating crane installation.
移动式起重机船用安装的设计。
The tower crane installation before the deal with the basis of acceptance;
高层塔吊整体安装前应对其基础进行验收；
The arch rib have been fabricated longitudinal by 7 segments, and used the non-support cable crane installation and the steel cable diagonal-tension method.
拱肋纵向分7段预制，采用无支架缆索吊机安装、钢丝绳斜拉扣挂法施工。
With the impact and vibration of the crane, it may cause the rail installation loose, the connector fall off, deformation, crack, precision index super difference.
随着起重机运行时产生的冲击和振动，可能引起轨道安装的松动、连接件脱落、变形、裂纹、精度指标超差。
To install the crane span before installation, camber, level of metal structure of main girder bending, trolley rail height difference, gauge deviation, diagonal bridge survey.
安装前要对起重机安装跨度，金属结构主梁的拱度、水平旁弯，小车轨道高低差、轨距偏差，桥架对角线等进行测量。
The main bridge type crane, the erection and assembly has strict technical requirements, and a set of measurement methods to measure the installation result strictly.
桥架式桥式起重机的主体，其架设和组装都有严格的技术要求，并有一套严格的测量方法来测量安装结果。
Disassembly unit must have the qualification of the tower crane disassembly operations, but also in the qualification range in installation and disassembly.
塔机拆装必须要具有资质的拆装单位进行作业，而且要在资质范围内从事安装拆卸。
In order to ensure the normal and safe use of the tower, we have a mandatory requirement in the installation of tower crane safety device must have specified.
为了保证塔机的正常与安全使用，我们必须强制性要求塔机在安装时必须具备规定的安全装置。
During cantilever construction of CCTV main building, high frequency, high precision and multi-point dynamic monitoring is used in tower crane displacement installation and usage.
CCTV主楼悬臂施工阶段，对塔式起重机在移位安装至悬臂部位过程中和使用状态下进行高频次、高精度、多点位动态监测。
Jib crane: in circles over the operation site and more for open-air handling and installation work.
臂架型起重机：可在圆形场地及其上空作业，多用于露天装卸及安装等工作。
SL Type Manual Single-girder Crane is a light-small kind, which is applicable to equipment installation, maintenance and work sites without power source.
SL手动单梁起重机属轻小机种，适用于工厂设备安装、维修以及无电源的作业场所。
Balance weight block installation position is not accurate, will cause the boom and the balance arm balance torque deviation is too large, easily lead to instability of the tower crane.
平衡重块安装位置不准确，会造成起重臂与平衡臂平衡力矩偏差过大，轻易造成塔吊失稳。
Crane control software can be used in the lift cables, lifting equipment, the take-off and landing platform, storage systems, installation of the port.
天车控制软电缆可用于电梯、起重设备、升降平台、仓库系统、港口安装。
Abstract: Bridge crane is a significant increase labor productivity goods handling equipment, primarily to carry goods workshops, equipment installation and maintenance, and other purposes.
摘要：桥式起重机是一种提高劳动生产率重要物品搬运设备，主要适应车间物品搬运、设备的安装与检修等用途。
Code for construction and acceptance of electric device of. crane electrical equipment installation engineering.
电气装置安装工程施工及验收规范。
Hydropower Station Gantry Crane: mainly used for lifting and opening and closing gates, but also the installation.
水电站龙门起重机：主要用来吊运和启闭闸门，也可进行安装作业。
Some crane beam for 700t cranes was detected having installation error of rail eccentricity exceeding code limit.
某700吨吊车梁的吊车轨道偏心超过规范允许偏差。
The utility model has the advantages of simple structure, stable operation, cost saving, and easy installation, and the device is especially suitable for travelling crane with small tonnage.
本实用新型具有结构简单、运行稳定、节约成本、易于安装的特点，特别适合于小吨位行车。
The current widespread use of self climbing tower crane has three basic ways of installation: concrete block installation fixed foot, large chassis heavy pressure and mounting is walking.
目前普遍使用的自升式塔机有三种基本安装方式：即大混凝土块内安装固定脚，大底盘加压重和行走式的安装方式。
The electric single-beam bridge crane is used in equipment installation and overhaul.
桥式 起重机 ，是一种轻小型起重设备。
The electric single-beam bridge crane is used in equipment installation and overhaul.
桥式 起重机 ，是一种轻小型起重设备。
应用推荐