This paper introduces the way of designing communication node based on CAN bus.
介绍了基于CAN总线的通信节点设计方法。
Up to 192 discrete output points, 32 valve solenoids, and 96 inputs per communication node.
最多192个离散输出点，32阀电磁阀，并投入96个通讯节点。
These typical computer systems are valuable for the fault tolerant design of network servers, host computers, and communication node computers for computer networks.
它们对于计算机网络中网络服务器、主机和通信节点机的容错设计都具有良好的参考价值。
The method comprises the following steps: querying consultation parameters of a communication node in a local database after creating a wireless link with the communication node;
该方法包括：在与通信对端建立无线链路后，查询本地数据库中该通信对端的协商参数；
In this error scenario, the communication link fails between the nodes, and both nodes believe that they are the primary node.
在这个错误场景中，节点之间的通信链发生故障，每个节点都认为自己是主节点。
When the FCM buffers are created in a separate memory segment, the communication between FCM daemons of different logical partitions on the same physical node occurs through Shared memory.
而当在单独的内存段中创建F CM缓冲区时，在同一物理节点上的不同逻辑分区的FCM守护进程间的通信将通过共享存储器进行。
Once you do this setup communication from the OS X machine and verify you can see the remote node by calling the nodes function.
完成上述操作之后，就可以从OSx机器建立通信，通过调用nodes函数验证是否可以看到远程节点。
Issue the following preprpnode commands as a root user to allow communication between the existing nodes and the new node.
作为根用户发出以下的preprpnode命令，让现有节点和新节点能够相互通信。
The node directory entry must contain the key information hostname (IP address is also acceptable), and communication port (this may be in the form of a port name or number).
该节点目录条目必须包含关键信息主机名（也可以是IP地址）和一个通信端口（可以是端口名或端口号）。
Each node can automatically route messages from other nodes, greatly increasing the communication range beyond that of any single device.
每个节点都能够自动地路由其他节点中传来的消息，即有效地增强了信号的传输范围。
The node MAVs spread out to create a grid onto which virtual pheromone can be deposited and detected through local communication.
作为节点的飞行器发射信号并建立一个网格，网格上就有虚拟的“信息素”，通过本地网络就可以探测到该信息素。
A step has been taken toward enabling such node-to-node communication, courtesy of a consolidated radio with an on-chip antenna.
内置天线的强化无线电收发器，使之朝着点对点通讯迈进了一步。
It expatiates the implement method in detail, which involves the data communication state machine between gateway and Infra - red node, timer design and the management of data queue.
详细说明了红外网关的具体实现方法。其中包括网关与红外接收器的数据通信状态机、定时器设计以及数据队列管理。
The hardware composition and software flowchart of the CANbus node communication card are described in detail.
对CAN总线节点通讯卡的硬件组成，软件流程做了较详细的说明。
Information in the GRD is available to all instances, either directly if that information is maintained locally, or indirectly through communication with background processes on the remote node.
GRD中的信息对于所有的实例都是可以访问的，如果这个信息是在本地，可以通过直接访问；如果不在本地，可以通过和远程节点的后台进程通信来访问。
Fast communication buffers (fcm_num_buffers) : for inter-node communication between partitions and agents.
FastCommunicationbuffers (fcm_num_buffers)：用于分区之间的节点间通信。
Through the CAN interface and PC-CAN adapter, we realize communication between the CAN node and the PC.
通过CAN接口与PC - CAN适配卡实现了现场测控点与工控机间的通讯。
The control function of network is distributed to the intelligent communication controllers of EP-NET of every node instead of using network server.
NET不设专用的网络服务器，网络的控制功能由每个节点上的EP-NET智能网络控制器来实现。
This paper presents the concept of node group and proposes a new method to evaluate the invulnerability of communication networks.
提出了节点团的概念，并且针对基于节点团通信网络的抗毁性提出了一种评价方法。
This paper mainly introduces the design and implementation of the wireless sensors node and the realization of the wireless communication protocol.
本文主要介绍系统中无线传感器节点的设计以及无线通讯协议的实现。
The design of control node of home network control system is described. The design includes hardware, software, and the development of wireless communication protocol.
介绍了家庭网络控制系统的控制子节点设计，控制子节点的软硬件的设计与开发，无线通信协议的设计与开发。
Then, this paper analyzes the function of data exchange communication component, data exchange adapter component and data load component which are parts of data exchange node.
接下来，简要分析了数据交换节点上数据交换通信组件、数据交换适配器组件、数据加载组件的功能。
The whole system manage platform include: system whole function module, task management function module, node management function module, communication management function module.
整个系统管理平台包括如下模块：系统整体功能模块、作业管理功能模块、节点管理功能模块、通讯管理功能模块等。
And it designs the CAN field bus node communication, the universal controller and the module of data gathering in details, and finally runs the system under the development environment.
同时主要对CAN总线节点的通信程序、家电通用控制器和数据采集模块进行了详细设计，并最终在开发环境下演示运行。
Secure and seamless roaming between internal and external networks, switching between double and triple tunnel, and protecting communication between home agent and mobile node.
在内部和外部网络间进行安全和无缝漫游，在双重和三重隧道间切换，以及保护归属代理和移动节点间的通信。
Because of node mobility, the network topology changes frequently, moreover once nodes move, the current route is no longer valid and this causes a communication interruption called a link failure.
由于节点的移动，网络拓朴频繁发生变化，一旦节点移动，当前的路由就很容易失效，从而造成通讯中断，这种情况就是链路失效。
Information communication system, information communication method, node device included in information communication system, and recording medium having information processing program recorded on it.
信息通信系统，信息通信方法，包含在信息通信系统中的节点装置，以及记录信息处理程序的记录介质。
The system use communication net based on the can bus to ensure that the fault message of recorder equipment can be transferred to PC net node fastly.
为保证信息的可靠、快速的传递，采用基于CAN总线的通讯网络。使故障录波监测装置的故障信息及时上报到后台pc网络节点上。
Mobile communication system, router, mobile node, and mobile communication method.
移动通信系统，路由器，移动节点和移动通信方法。
Mobile communication system, router, mobile node, and mobile communication method.
移动通信系统，路由器，移动节点和移动通信方法。
应用推荐