The time of dropping rod was analysed by numerical simulation.
通过数值计算，分析了上置式水力驱动控制棒的落棒时间。
The effects of moving ground are given by numerical simulation.
用数值模拟手段给出了地面效应和影响。
Finally we estimate the optimal level of macro - tax burden in China by numerical simulation.
最后通过数值模拟，对中国的最优宏观税负水平进行了估计。
The magnetic flux density on the crack tip in a metal pipeline was studied by numerical simulation method.
用数值模拟方法研究了金属管道裂纹尖端磁通量密度的分布情况。
By numerical simulation of a six-tooth rectangle spline, the optimized half-angle of the concave die can be got.
结合六齿矩形花键轴实际成形情况进行模拟计算，获得了入模半锥角的较佳取值范围。
The calefaction and acceleration process of ceramic powders in plasma spray were studied by numerical simulation.
通过数值模拟研究了等离子喷涂陶瓷粒子的加热加速行为。
The dynamics properties of two modulated-coupling single-mode lasers system are analyzed by numerical simulation.
通过数值模拟对两台空间耦合受到调制的单模激光器系统的动力学行为进行研究。
The temperature field and thermal stress field on the crack tip in a metal was studied by numerical simulation method.
用数值模拟方法研究了金属裂纹尖端的温度场和热应力场的分布情况。
In this paper, the forming process of copper wire ball in copper ball bonding has been studied by numerical simulation.
本文采用数值模拟的方法研究了铜丝球键合技术中的形球过程。
The dynamic response of fresh concrete filling pile under blasting load is studied by numerical simulation in this paper.
采用数值模拟方法，对新浇混凝土灌注桩在爆破振动作用下的动态响应进行了分析。
The deep drawing process of AZ31 magnesium alloy rectangular parts was researched by numerical simulation and experiments.
采用数值模拟和实验相结合的方法研究了AZ31镁合金板料分块压边力拉深矩形件的过程。
By numerical simulation method, the comparisons of aerodynamic performance between airfoil and plate blade axial fans were made.
采用数值模拟方法对机翼型及板型叶片的轴流风机的气动性能进行了比较。
The mixing characteristics of jets from four rectangular nozzles with aspect ratio of 8 were investigated by numerical simulation.
设计了一组宽高比为8的不同形式的矩形喷口，对其尾喷流掺混特性进行了数值模拟。
The optimization on the filling and solidification process of CY-61100 lathe tailstock casting was conducted by numerical simulation.
对CY- 61100车床尾座铸件充型及凝固过程进行了数值模拟及优化研究。
This article also compares reload stock option with geometric Asian-reload stock option in the manager's role by numerical simulation.
还通过数值模拟分析比较了传统再装期权与几何亚式一再装股票期权在经理激励中的作用。
The distribution of slip displacement, slip velocity and friction force on the strike slip fault were obtained by numerical simulation.
通过数值计算得到了平移断层上滑移位移、速度及摩擦力的分布规律。
Finally, the time dependence influence of the new tunnel's construction to adjacent building was analyzed by numerical simulation method.
最后，采用数值模拟的方法分析了新建隧道的施工对邻近建筑物的时间相关性影响。
Processing analysis by numerical simulation(NS) of deep drawing step in progressive die(DDSPD) quickly and accurately was very important.
在带有拉深工步的级进模设计中，用数值模拟技术对其拉深工步进行工艺分析是非常重要的。
By numerical simulation, we achieve the distribution of wind pressure on walls and wind environment at pedestrian level around the towers.
通过数值模拟，获得了幕墙的风压分布情况及塔四周行人高度风环境情况。
The gas flow in blast furnace with various burden charge patterns has been analyzed by numerical simulation with finite difference method.
用有限差分法对高炉内气体流动行为进行了数值解析，并系统地分析了不同料床结构对气体流动行为的影响。
The model of the Boron ion spread in wafer was analyzed by numerical simulation and the micro resistor fabrication conditions were optimized.
通过数值计算，建立了制备过程中硅基底中的硼离子的空间浓度分布的理论模型，优化了二次硼扩散工艺条件。
Effect of reversal time on energy consumption for the regenerative soaking pits is researched by numerical simulation and experimental research.
通过数值模拟和实验方法，重点研究了换向时间对蓄热式均热炉能耗的影响。
By numerical simulation, the taxiing performance of an active control system landing gear and that of a passive system landing gear are compared.
通过数值模拟计算，对主动控制起落架和被动起落架的滑行性能进行了比较。
The rational perforation degree and the corresponding development index of the reservoir with different energy were studied by numerical simulation.
利用数值模拟方法，研究了不同能量的底水油藏对应的合理射开程度以及在该射开程度下的开发指标。
The available scope of prediction distance can be determined in light of the stress concentration ascertained by numerical simulation for stress field.
可以通过应力场数值模拟得出的应力集中区来确定有效预测距离的范围。
In this paper, the validity of small specimen SHPB technique was analyzed by numerical simulation and SHPB test of series of dimension LY12 al specimen.
本文结合数值模拟和系列尺寸ly12铝合金试样的SHPB试验对小尺寸(相对于压杆直径，下同)试样SHPB实验的准确性进行了分析和探讨。
Film condensation heat transfer characteristics are studied by numerical simulation for a single horizontal tube in the presence of a non condensable gas.
为查明不凝气体对水平管外膜状凝结换热特性的影响规律，建立了水平单管的气、液双边界层模型。
The fluid flow and transport process of non metal inclusion in tundish under bottom blowing are studied by numerical simulation and water model experiment.
采用数值模拟手段，结合水模型实验，研究了中间包底部吹气过程对中间包内流场及夹杂物传输行为的影响。
The process of the wavelength conversion is analyzed by numerical simulation and walk-off effect and pulse broadening have been observed in pulse propagations.
通过数值模拟，研究了波长转换过程，观察到脉冲传播过程中出现了走离效应与脉冲展宽。
The process of the wavelength conversion is analyzed by numerical simulation and walk-off effect and pulse broadening have been observed in pulse propagations.
通过数值模拟，研究了波长转换过程，观察到脉冲传播过程中出现了走离效应与脉冲展宽。
应用推荐