Finally we estimate the optimal level of macro - tax burden in China by numerical simulation.
最后通过数值模拟,对中国的最优宏观税负水平进行了估计。
The effectiveness and reliability of the model were confirmed by numerical simulation results.
数值计算结果表明,该模型有效、可靠。
The efficiency of the method is validated by numerical simulation studied on a damage cantilever beam.
通过对悬臂梁在损伤情况下的数值模拟验证了该方法的有效性。
The temperature field of ladle is computed and analyzed by numerical simulation and on-spot measurement.
采用数值计算与实测相结合的方法,对钢包温度场进行了计算与分析。
The magnetic flux density on the crack tip in a metal pipeline was studied by numerical simulation method.
用数值模拟方法研究了金属管道裂纹尖端磁通量密度的分布情况。
A three wavelengths lidar system was proposed. Its performance was studied by numerical simulation method.
本文介绍了一台三波长米散射激光雷达系统,并用数值模拟计算的方法研究其性能。
The solutions are verified by numerical simulation, showing that the approximate solutions are fairly accurate.
同时用电子运动模拟计算进行了校验,指出近似解析解有较好的准确性。
The calefaction and acceleration process of ceramic powders in plasma spray were studied by numerical simulation.
通过数值模拟研究了等离子喷涂陶瓷粒子的加热加速行为。
The dynamics properties of two modulated-coupling single-mode lasers system are analyzed by numerical simulation.
通过数值模拟对两台空间耦合受到调制的单模激光器系统的动力学行为进行研究。
The temperature distribution, density and gas yield of the biomass fuel bed were obtained by numerical simulation.
通过数值模拟,得出了燃料层热解过程中的温度场的分布、层内固体密度的变化以及气体的生成规律。
The temperature field and thermal stress field on the crack tip in a metal was studied by numerical simulation method.
用数值模拟方法研究了金属裂纹尖端的温度场和热应力场的分布情况。
In this paper, the forming process of copper wire ball in copper ball bonding has been studied by numerical simulation.
本文采用数值模拟的方法研究了铜丝球键合技术中的形球过程。
The dynamic response of fresh concrete filling pile under blasting load is studied by numerical simulation in this paper.
采用数值模拟方法,对新浇混凝土灌注桩在爆破振动作用下的动态响应进行了分析。
The deep drawing process of AZ31 magnesium alloy rectangular parts was researched by numerical simulation and experiments.
采用数值模拟和实验相结合的方法研究了AZ31镁合金板料分块压边力拉深矩形件的过程。
Effect of stress wave on larger diameter metal pipe was studied by numerical simulation under local external contacting explosion.
以大口径金属管道为对象,通过数值模拟研究了金属管道在局部外接触爆炸荷载作用下的应力波对其的效应。
The mixing characteristics of jets from four rectangular nozzles with aspect ratio of 8 were investigated by numerical simulation.
设计了一组宽高比为8的不同形式的矩形喷口,对其尾喷流掺混特性进行了数值模拟。
The optimization on the filling and solidification process of CY-61100 lathe tailstock casting was conducted by numerical simulation.
对CY- 61100车床尾座铸件充型及凝固过程进行了数值模拟及优化研究。
This article also compares reload stock option with geometric Asian-reload stock option in the manager's role by numerical simulation.
还通过数值模拟分析比较了传统再装期权与几何亚式一再装股票期权在经理激励中的作用。
The distribution of slip displacement, slip velocity and friction force on the strike slip fault were obtained by numerical simulation.
通过数值计算得到了平移断层上滑移位移、速度及摩擦力的分布规律。
Processing analysis by numerical simulation(NS) of deep drawing step in progressive die(DDSPD) quickly and accurately was very important.
在带有拉深工步的级进模设计中,用数值模拟技术对其拉深工步进行工艺分析是非常重要的。
The gas flow in blast furnace with various burden charge patterns has been analyzed by numerical simulation with finite difference method.
用有限差分法对高炉内气体流动行为进行了数值解析,并系统地分析了不同料床结构对气体流动行为的影响。
The model of the Boron ion spread in wafer was analyzed by numerical simulation and the micro resistor fabrication conditions were optimized.
通过数值计算,建立了制备过程中硅基底中的硼离子的空间浓度分布的理论模型,优化了二次硼扩散工艺条件。
Static strength of the frame side rail was examined by numerical simulation using the FEA code MSC-NASTRAN with results verified by the test.
针对轻型货车在行驶过程中纵梁撕裂的问题,应用有限元分析软件对车架的强度进行了分析,并通过实验的方法证明了计算模型的正确性。
The erosion mechanisms of dendritic main air distributor of FCC unit is analyzed by numerical simulation of internal flow field of distributor.
通过对催化裂化装置再生器树枝状主风分布管内流场的数值模拟,分析了树枝状主风分布管磨损的机理。
Effect of reversal time on energy consumption for the regenerative soaking pits is researched by numerical simulation and experimental research.
通过数值模拟和实验方法,重点研究了换向时间对蓄热式均热炉能耗的影响。
The rational perforation degree and the corresponding development index of the reservoir with different energy were studied by numerical simulation.
利用数值模拟方法,研究了不同能量的底水油藏对应的合理射开程度以及在该射开程度下的开发指标。
The relation between laser texturing overlaid rate and 18-8 stainless steel fatigue life was analyzed by numerical simulation and related experiments.
通过模拟分析,对激光毛化18 8不锈钢的疲劳寿命与毛化覆盖率的关系进行研究,预测结果与相关实验结果进行对比。
The available scope of prediction distance can be determined in light of the stress concentration ascertained by numerical simulation for stress field.
可以通过应力场数值模拟得出的应力集中区来确定有效预测距离的范围。
Film condensation heat transfer characteristics are studied by numerical simulation for a single horizontal tube in the presence of a non condensable gas.
为查明不凝气体对水平管外膜状凝结换热特性的影响规律,建立了水平单管的气、液双边界层模型。
Film condensation heat transfer characteristics are studied by numerical simulation for a single horizontal tube in the presence of a non condensable gas.
为查明不凝气体对水平管外膜状凝结换热特性的影响规律,建立了水平单管的气、液双边界层模型。
应用推荐