All results are verified by computer simulation.
本文结果均由计算机模拟所证实。
The theory and circuits are verified by computer simulation.
最后经计算机模拟证明理论与电路的正确性。
The nonlinear model is proved feasible by computer simulation.
通过计算机模拟说明了此模型的可行性。
The interface roughening has been studied by computer simulation.
利用计算机模拟研究了界面粗糙化。
Finally, the validity of the analysis is tested by computer simulation.
通过计算机模拟，验证分析的有效性。
By computer simulation, a fairly accurate correction value can be obtained.
通过计算机模拟，得到迭代修正后精确的近场值。
Some calculation methods are given by computer simulation which have practical value.
通过计算机模拟，得出了有实用价值的计算方法。
It was found that the thickness of bottles was well predicted by computer simulation.
模拟计算对于成型瓶子最终的厚度分布有较好的预测能力。
The estimate errors are analyzed by computer simulation and its application is discussed.
通过电子计算机模拟试验分析了推定误差并讨论其应用问题。
It showed that the model has good adaptability with a quick convergence speed by computer simulation.
最终在计算机上模拟了这个过程，结果表明利用该模型收敛速度较快，并具有良好的适应性。
The feasibility and validity of this method is demonstrated by computer simulation and the reconstructed image.
计算机模拟得到了很好的再现结果，证明了该方法的可行性和有效性。
Only by computer simulation, can the request of high quality and high output for the polymer process be satisfied.
只有通过相关的计算机模拟，才能满足聚合物加工高质量和高产量的要求。
The feasibility of the presented diagnosis method has been proved by computer simulation as applied to practical cases.
对实例所作的计算机模拟证明了所提诊断方法是可行的。
Our company is the third generation of automatic control by computer simulation of cardiopulmonary resuscitation (CPR).
是我公司第三代由电脑自动控制的心肺复苏模拟人。
That is, there exists an optimal threshold, which lies in the average gray of the joint transform power spectrum by computer simulation.
并通过计算机模拟，确定出该最佳阈值位于联合变换功率谱的平均灰度值附近。
The CVSD algorithm is described and the optimization of system parameter values and system performance by computer simulation is discussed.
研究了连续可变斜率增量调制算法，并通过计算机模拟对系统参数及系统性能进行讨论和优化。
The radar images produced by computer simulation are proposed as standard images for estimating the performances of the codings and the system.
提出采用计算机模拟雷达图象作为标准国象来评估编码及系统的性能。
To solve this problem, the spinning tensions were discussed by computer simulation under the indicated conditions of different spinning technology.
为解决由于采用新工艺所产生的卷绕张力不匀，在不同的纺丝工艺下，利用计算机对纺丝成形张力进行了数学模拟计算。
By computer simulation, we analysis and study the law of wall rock stress distribution, deformation, the axial force of bolt and the roof-off-strata.
通过计算机数值模拟分析研究了锚杆支护回采巷道围岩应力分布、围岩变形、锚杆轴力及顶板离层规律。
The results by computer simulation indicate that the mixed chaotic signals, by using the method, the source signals can be separated fast and effectively.
现有的混合混沌信号分离方法一般都要利用各个混沌信号的内在性质以及一定的约束。
The regular pattern of anti pressure has been found in theory by computer simulation, and offered scientific accordance for shrink ratio experiment of window.
通过对各缩比模型承载试验的计算机仿真，从理论上找出了缩比结构的承载规律，进而对窗口结构缩比试验提供科学依据。
The effect of gear box speeds number of the agricultural transport vehicle on fuel economy and power output has been studied by computer simulation in this paper.
利用计算机模拟探讨变速箱档位数对农用运输车经济性与动力性的影响。
Relation curve between angular velocity and waving angular of boom and relation curve between swaying force and waving angular are obtained by computer simulation.
经计算机模拟，得到了悬臂摆动角速度与悬臂摆角的关系曲线以及摆动力与悬臂摆角的关系曲线。
The relationship between grinding marks and the grinding parameters is analyzed. The cutting trajectories of grits on the wafer are predicted by computer simulation.
本文建立了硅片自旋转磨削的运动几何学模型，分析了磨削参数与磨削纹理的关系，并对磨粒磨削运动轨迹进行了计算机仿真和预测；
By computer simulation of machining we can check the correctness and rationality of NC programming, and avoid the collision between machine tool and blade or fixture.
通过加工仿真，以检查数控程序的正确性、合理性，避免加工设备与叶片和夹具等的碰撞。
The proposed method that can identify the characteristic of NSG water level correctly and has enough precision of identification is demonstrated by computer simulation.
仿真结果表明，所提出的方法能够正确地辨识核动力蒸汽发生器的水位特性，且具有较高的辨识精度。
The machining approach is verified to be simple and reliable by computer simulation, so the production efficiency can be improved and the equipment input can be reduced.
通过计算机模拟验证了该加工方法的简便与可靠性，可以降低非球面反射镜加工的设备投入，提高生产效率。
The new algorithm is better than classical LMS that is verified by computer simulation of adaptive channel equalizer, while the computional amount is only increased slightly.
在计算机仿真自适应信道均衡中，该算法的性能明显优于传统的LMS算法，而计算量增加甚少。
Viterbi decoding is discussed and the performances of convolutional encoding and Viterbi decoding are analyzed by computer simulation, and compared to other decoding methods.
对不同码率、约束长度的卷积码编译码系统的误码性能进行了计算机仿真，并与其他译码方案的性能进行了比较。
Next, according to system request, the corresponding simulation system model is established. The simulated program is completed by MATLAB and validated by computer simulation.
其次，根据系统设计方案建立了相应的仿真模型，利用MATLAB设计完成了仿真程序，并且进行了计算机仿真验证。
应用推荐