All results are verified by computer simulation.
本文结果均由计算机模拟所证实。
The theory and circuits are verified by computer simulation.
最后经计算机模拟证明理论与电路的正确性。
The nonlinear model is proved feasible by computer simulation.
通过计算机模拟说明了此模型的可行性。
Some calculation methods are given by computer simulation which have practical value.
通过计算机模拟,得出了有实用价值的计算方法。
It was found that the thickness of bottles was well predicted by computer simulation.
模拟计算对于成型瓶子最终的厚度分布有较好的预测能力。
The estimate errors are analyzed by computer simulation and its application is discussed.
通过电子计算机模拟试验分析了推定误差并讨论其应用问题。
The results by computer simulation show that the codings and the system described in this paper…
计算机模拟测试表明,本文提出的编码及系统能实现雷达图象的准实时传输与显示。
It showed that the model has good adaptability with a quick convergence speed by computer simulation.
最终在计算机上模拟了这个过程,结果表明利用该模型收敛速度较快,并具有良好的适应性。
Only by computer simulation, can the request of high quality and high output for the polymer process be satisfied.
只有通过相关的计算机模拟,才能满足聚合物加工高质量和高产量的要求。
The feasibility of the presented diagnosis method has been proved by computer simulation as applied to practical cases.
对实例所作的计算机模拟证明了所提诊断方法是可行的。
That is, there exists an optimal threshold, which lies in the average gray of the joint transform power spectrum by computer simulation.
并通过计算机模拟,确定出该最佳阈值位于联合变换功率谱的平均灰度值附近。
The CVSD algorithm is described and the optimization of system parameter values and system performance by computer simulation is discussed.
研究了连续可变斜率增量调制算法,并通过计算机模拟对系统参数及系统性能进行讨论和优化。
The effect of gear box speeds number of the agricultural transport vehicle on fuel economy and power output has been studied by computer simulation in this paper.
利用计算机模拟探讨变速箱档位数对农用运输车经济性与动力性的影响。
Relation curve between angular velocity and waving angular of boom and relation curve between swaying force and waving angular are obtained by computer simulation.
经计算机模拟,得到了悬臂摆动角速度与悬臂摆角的关系曲线以及摆动力与悬臂摆角的关系曲线。
The relationship between grinding marks and the grinding parameters is analyzed. The cutting trajectories of grits on the wafer are predicted by computer simulation.
本文建立了硅片自旋转磨削的运动几何学模型,分析了磨削参数与磨削纹理的关系,并对磨粒磨削运动轨迹进行了计算机仿真和预测;
The proposed method that can identify the characteristic of NSG water level correctly and has enough precision of identification is demonstrated by computer simulation.
仿真结果表明,所提出的方法能够正确地辨识核动力蒸汽发生器的水位特性,且具有较高的辨识精度。
The machining approach is verified to be simple and reliable by computer simulation, so the production efficiency can be improved and the equipment input can be reduced.
通过计算机模拟验证了该加工方法的简便与可靠性,可以降低非球面反射镜加工的设备投入,提高生产效率。
The new algorithm is better than classical LMS that is verified by computer simulation of adaptive channel equalizer, while the computional amount is only increased slightly.
在计算机仿真自适应信道均衡中,该算法的性能明显优于传统的LMS算法,而计算量增加甚少。
Viterbi decoding is discussed and the performances of convolutional encoding and Viterbi decoding are analyzed by computer simulation, and compared to other decoding methods.
对不同码率、约束长度的卷积码编译码系统的误码性能进行了计算机仿真,并与其他译码方案的性能进行了比较。
This new control method is compared with the traditional one by computer simulation, and a dynamical analysis of the control system is conducted for the whole flight process.
进行了新方法与传统控制方法的对比及整个飞行过程的控制系统的动态仿真。
Next, according to system request, the corresponding simulation system model is established. The simulated program is completed by MATLAB and validated by computer simulation.
其次,根据系统设计方案建立了相应的仿真模型,利用MATLAB设计完成了仿真程序,并且进行了计算机仿真验证。
The new algorithm is better than classical LMS that is verified by computer simulation of adaptive channel equalizer, while the computational amount is only increased slightly.
在计算机仿真自适应信道均衡中,该算法的性能明显优于传统的LMS算法,而计算量增加甚少。
The error model was verified by computer simulation, and the result indicates that the error model established can approximately report the changing trend of the actual pose errors.
最后,通过计算机仿真对误差模型进行了验证,结果表明,该误差模型能够反映实际姿态误差的变化。
Main characteristics of statistical accuracy for P-S-N curves are analyzed and the method for mean square error of P-S-N curves parameters by computer simulation is brought forward.
分析了反映P SN曲线统计精度的主要指标,提出了P S N曲线参数估计量的均方误差计算机模拟求法。
It will show that the improved spline interpolation can give the estimate result in enough precision. The approach is implemented and validated by computer simulation and experiment.
计算机仿真和实验验证的结果表明,改进型三次样条函数插值可以给出足够精度的估计结果。
Finally, the contours of GDOP under various conditions in the specific surveillance region and the influence with basic line and the depth and so on are drawn by computer simulation.
最后通过仿真,分析不同基阵布阵情况下的受控区域内GDOP的分布情况及基线和目标的深度等对GDOP的影响。
In the paper, the redundancy is used to decrease residual vibration of flexible link robot through optimal self motion, and the method is proved to be efficient by computer simulation.
本文将冗余自由度用于消减柔性杆机器人的残余振动,通过优化选择最优的自身运动以达到减振目的,模拟结果表明,这一方法可以取得很好的效果。
The algorithm is robust for cases where target occlusion and rapidshape change exist. Results by computer simulation show that the performance of the algorithm proposed is satisfactory.
算法对目标遮挡和形状变化较大的情形有鲁棒性,计算机模拟实验的结果验证了算法的良好性能。
The analysis model of image gathering system is proposed. The relationship of system end-to-end information rate with target statistical characteristics is examined by computer simulation.
建立了图像采集系统分析模型,计算机仿真分析图像采集系统端到端信息率与采样目标统计特性的关系。
The analysis model of image gathering system is proposed. The relationship of system end-to-end information rate with target statistical characteristics is examined by computer simulation.
建立了图像采集系统分析模型,计算机仿真分析图像采集系统端到端信息率与采样目标统计特性的关系。
应用推荐