The CAN bus communication protocol is composed, with the netcard driver programmed.
制定CAN总线通讯协议，开发其驱动程序。
The CAN bus communication protocol was explained and the form of the communication message is established on application layer.
详细的介绍了CAN通讯协议准的拓扑结，制定了CAN总线应用层协议的通讯报文形式。
Programming realized the CO2 welding systems of digital control. Based on CAN bus circuit, the CAN bus communication protocol design is discussed in more detail.
编程实现了整个焊接系统的数字化控制篙详细说明了CAN总线电路的设计、CAN总线的通信协议设计。
Be familiar with the communication protocol and information content of automobile CAN-Bus, which is very important to automobile maintain and application research of automobile network technology.
熟悉汽车CAN总线的通信协议和信息内容对于汽车故障维修以及进行汽车网络技术方面的应用研究具有重要意义。
CAN bus is a kind of serial communication network using CAN protocol.
总线是一种使用CAN协议的串行通信网络。
Each module is a node of CAN-BUS, which could be online debugging by the program loading the microcontroller of them and could correspond with each other by the primary communication protocol.
模块之间则是通过CAN总线连接，每个模块都是总线上的一个节点，通过对节点中的微控制器的程序设计，各节点可以联机调试，并通过本文制定的初步协议来实现相互的通信。
In this paper, a communication protocol based on RS-485 bus is discussed in detail, and the qualitative analysis of its reliability using the finite state machine model is given.
本文详细讨论了一种基于RS- 485总线的通信协议，并用有限状态机模型对其可靠性做定性分析。
Finally, according to the SAE J1939 Application protocol, a primary communication protocol is drafted, and an experimental CAN Bus network is constructed to implement communication testing.
最后通过参考sae J 1939应用协议拟订初步通信协议，并进行实验台CAN总线网络实现通讯测试。
Product Mechanical Dimensions, external electrical signal, communication bus protocol and the standard memory card line, and currently on the market with memory card interface device is compatible.
产品机械尺寸、外部电气信号、通讯总线协议与标准的存储卡保持一致，与目前市场上的带有存储卡接口的终端设备兼容。
For the software design, it's composed of three modules: CAN bus equipment interface communication module, purify gateway protocol transform module and Ethernet application module.
软件设计分为三个模块：CAN总线设备接口通信模块、透明网关协议转换模块和以太网层应用模块。
Constructing a full layered communication protocol module, with reference to the network communication protocol model of OSI and overseas home automation bus.
在参考osi网络通信协议模型与多种国外家庭自动化总线的基础上，构建一个完整的分层的基于低压电力线的通信协议模型。
With the commonly used serial bus as design basis, the kernel technologies, e. g., architecture and communication protocol of USB are analyzed and discussed.
本文以通用串行总线为设计基础，分析并讨论了USB的体系结构、通信协议等核心技术。
HART communication protocol which belongs to transitional protocol introduced in this paper is rudiment of field bus, which permits transmitting digital signal on analog signal circuit.
HART协议是现场总线的一种过渡性协议，可使数字与模拟信号同时传送且互不干扰，实现双向通讯。
The CAN communication adapter base on USB bus, the network model and communication protocol of CAN bus are explained briefly.
主要包括基于usb总线的CAN适配器、CAN总线网络模型和通信协议的设计。
This paper focuses on the features, communication protocol and use ranges of CAN bus. A practical example of CAN bus system is impemented.
介绍了CAN总线的技术特点、通信协议和应用范围，并给出了CAN总线系统的设计实例。
CAN bus is a serial communication protocol and ADAPTS to bottom layer communication of distributed control system.
CAN总线是一种串行通讯协议，适用于分布式控制系统的底层网络通信。
An elevator car controller based on CAN bus is described. The functions, architecture, hardware and software and the communication protocol designing methods of this controller are introduced.
简述了一种基于CAN总线的电梯轿厢控制器，介绍了该控制器的功能、结构及其软硬件和通信协议的设计方法。
This paper introduces a kind of industrial robot based on CAN and implements the interface between the communication bus and the system's modules. It also brings forward communication protocol.
介绍了一种基于CAN总线的分布式工业机器人控制器的研究开发情况，实现了总线与各模块的接口设计，并制定出相应的机器人控制器内部通信协议。
HART protocol which is the transitional protocol of field-bus allows transferring both digital signal and analog signal simultaneously in order to actualize bidirectional communication.
HART协议是现场总线的一种过渡性协议，可使数字与模拟信号同时传送且互不干扰，实现双向通讯。
Therefore, it will have a bright future to develop VLSI chip based on a PCI bus and related a communication protocol.
因此研究开发基于PCI总线接口和通信协议的超大规模集成电路芯片是具有应用前景和市场价值的。
CAN bus is a serial data communication protocol. It is regarded highly because of its excellent performance, high reliability, flexible design and low price.
CAN总线是一种串行数据通信协议，由于其卓越的性能、极高的可靠性、独特灵活的设计和低廉的价格而越来越受到人们的重视。
Besides, the paper also improves a serial communication protocol based on RS-485 data bus, and realizes the application.
此外，本文还改善了基于RS- 485总线的串口通信协议，并实现了这种协议的应用程序。
The research puts forward the methods of solving the problems by analyzing the limitations which MIL-STD-1553 B data bus protocol possesses in high speed data communication.
通过对美国军用标准MIL-STD-1553B总线协议在高速数据通讯中受到限制的分析，提出了现实解决办法。
MIC bus and 1553b bus are discussed and compared comprehensively according to the features such as architecture, communication protocol, performance and application fields, and so on.
基于总线体系结构、通信协议、性能以及应用场合对MIC总线和1553B总线进行了综合分析与比较。
Completion stealing is a problem difficult to deal with in protocol communication between CPU and PCI bus.
事务窃取一直是困扰CPU与PCI总线实现协议通信的难题。
Lower machine realizes the collection, control output of power parameter and communication protocol conversion by using the 16-bit MCU named SPCE061A of Sunplus Company and CAN bus controller SJA1000.
下位机利用凌阳十六位单片机SPCE061A和CAN总线控制器SJA1000实现电力参数的采集、控制输出，及通信协议转换。
After analyzing the features of CAN bus and RS-485, multifunctional concentrator and network communication protocol is designed.
通过分析CAN总线和RS 485总线的特点，设计了CAN总线多功能集中器和网络通信协议。
The OSI model of the M-bus and communication protocol are presented, transmission mechanism is analyzed, and the application in the house-using public business is introduced.
概述了该仪表总线的OSI模型及其通讯协议，分析了总线传输机制，介绍了仪表总线的实际应用。 它的应用将简化系统设计、提高性能价格比和运行可靠性。
The OSI model of the M-bus and communication protocol are presented, transmission mechanism is analyzed, and the application in the house-using public business is introduced.
概述了该仪表总线的OSI模型及其通讯协议，分析了总线传输机制，介绍了仪表总线的实际应用。 它的应用将简化系统设计、提高性能价格比和运行可靠性。
应用推荐