A novel bonding method using silicate gel as bonding medium is developed.
报道了一种利用硅乳胶作为键合介质的新型键合技术。
Also specifically disclosed is a bonding method using such a curable composition.
以及使用该固化性组合物的粘合方法。
Wire bonding method, semiconductor device, capillary for wire bonding and ball bump forming method.
丝焊方法，半导体器件，丝焊的毛细管及球块形成方法。
Thedrain saturation current is increased 10% after bonding. To disperse heat of GaNHEMT, this flip chip bonding method seems to be simple and effective.
实验结果表明，这种改进的倒装焊技术可以使HEMT 器件的饱和漏极电流提高10%。
By improving the bonding method of the rolled material and the painted membrane and the overlap treatment of the rolled material, waterproofing performance is enhanced.
改进了卷材与涂膜的粘结方法及卷材与卷材搭接的封闭处理，提高了防水性能。
The paper presents an study of copper clad steel wire produced by liquid and solid bonding method. Using the finite difference equation, the dipping process is analyzed.
以液固相反向凝固法生产的包铜钢线为研究对象，利用有限差分法分析了铜在钢线芯体上的浸覆过程；
The present invention relates to thermal compression bonding method for combination pole. First, provide plastic combination base with its combination surface down toward;
本发明涉及一种结合柱的热压合方法，首先提供一塑胶材质的结合座，其中该 结合座的结合面方向是朝下；
Diffusion bonding under pulsatile pressure is an ideal bonding method, which can accelerate diffusion, reduce the amount of intermetallic compound and improve its distribution.
脉冲加压扩散焊能促进扩散过程，减少金属间化合物的形成，改善其分布，是一种较有前景的扩散焊方法。
The text introduced the test method and application in some special instances about Information technology equipment Protective Bonding Conductor in Type test and Routing test.
介绍了型式认可试验和工厂例行检验中有关信息技术设备的保护连接导体电阻的测量方法，以及在某些特殊设备上的应用。
Bonding a steel plate at the surface of the tensile area is an effective method to reinforce the rc beams.
在受拉区表面粘贴钢板是加固钢筋混凝土梁的一种有效方法。
The finite element method is used in the study of HNDT for bonding defects of polymeric substances under vacuum-pressure difference.
本文是在激光全息无损检测（简称HNDT）高聚物研究中，利用有限元计算方法，对其叠层粘接缺陷在真空负压载荷下形变量进行计算。
Applications of this method in 18 Wells in Daqing oilfield show that the accuracy rate is 93.8% between the predicting results and the practical cement bonding index.
该方法在大庆油田18口井的应用结果表明，其预测结果的准确率达93.8%，为提高固井质量提供了一条新途径。
The equipment for measuring bonding strength of gunning mix is developed, the structure, measuring method and application are presented.
开发出用于测定喷补料接着强度的试验装置，介绍了装置的组成、 测定方法和应用试验。
First, the basic principle of the strain measurement with bonding resistance, theory of strain measurement, method and the relative signal disposition are introduced in the dissertation.
首先，介绍了电阻应变测量法的基本原理，应变测量的理论、方法以及相关的信号处理知识。
This paper puts forward an online measuring method for measuring the stress in silicon samples prepared with three common micromachining processes: deposition, etching, and bonding.
针对微加工工艺过程造成的残余应力，文中提出了喇曼在线测量方法，并对最常用的三种微加工工艺：淀积、腐蚀或刻蚀及键合进行了喇曼在线测量。
The method for evaluating bonding reliability is presented.
介绍了焊接可靠性的评价方法。
A new method for measuring bonding strength between electroplated layer and substrate of diamond tool is proposed.
提出一种新的电镀金刚石工具镀层与基体结合强度测试方法。
In this paper, concrete beams bonding FRP (fiber reinforced plastic) plates are analyzed by trial method, meanwhile, calculating program is established.
应用静力平衡试算法对玻璃钢板材加固梁进行理论分析，编制了计算程序。
The stress distribution of continuous and recessed bonding single-lap joints is discussed with use of elastoplastic finite element method (FEM) and experiment, considering the effect of fillet.
运用弹塑性有限元法结合实验研究了连续和间隙连接的单搭接接头应力分布规律，并考虑了胶瘤的影响。
A low frequency ultrasonic (Lamb like) wave method is used for characterizing the shear, longitudinal wave velocities, the thickness, and the density of ultra thin two layered bonding composite.
提出用低频超声类兰姆波定征方法来估计超薄双层胶结复合结构各层的纵波声速、横波声速、厚度和密度等参数。
This method can be used to check the maximum bonding shear stress at the end of plate, and to prevent the local destruction of the RC beam.
采用本文方法可以对加强片端部最大锚固剪应力进行验算，防止混凝土梁出现局部受拉破坏。
Thermal-structural analysis was performed for ultrasonic wire bonding(UWB) by three dimensional finite element method(FEM).
用三维有限元方法对超声波线焊进行了瞬态的热-结构分析。
A low frequency ultrasonic Lamb like wave method suitable for characterizing the thickness, density, shear and longitudinal wave velocities of the ultra thin bonding composite is presented.
提出用低频超声类兰姆波定征方法来估计超薄黏结复合结构各层与黏结层的厚度、密度、纵波声速和横波声速等参数。
A new method named orthogonal experiment design that can figure out the supreme design of craft in spray-bonding craft of needle-punching synthetic leather substrates.
分析了喷胶过程中影响合成革基布质量的各种因素，用正交实验设计方法，给出了针刺合成革基布在喷胶工艺中的最优化工艺设计。
Overseas scholars studied the efficiency of emotional bonding tactics and advanced the R-P network as a method of produce segment.
网格是国外学者在研究情感担保策略的有效性中提出的一种产品细分方法。
The study demonstrates that this method is simple, applicable, scientific, and rational, which can simulate the real bonding situation between the wellbore and the cement slurry.
研究结果表明，该评价方法简单适用，科学合理，较为真实地模拟了井壁岩石与水泥浆的胶结情况。
The present invention relates to detection technology of bonding strength and is especially the method of detecting bonding strength of solid materials.
本发明涉及一种粘接强度的测试技术，具体地说是一种测试固体材料的粘接强度的方法。
The new strengthening method Combining with steel - bonding, wending and bolt - bonding is introduced, and the strengthening mechanism of this method is also discussed.
“焊、锚、胶多重连接法”是一种新出现的复合加固方法，分析和探讨其加固机理。
This interfacial indentation method is suitable for use in those coatings with high bonding strength.
界面压入法适合于评价高结合强度的涂层。
This interfacial indentation method is suitable for use in those coatings with high bonding strength.
界面压入法适合于评价高结合强度的涂层。
应用推荐