The brace of aqueduct is dispersed with beam elements.
支架采用空间梁单元离散。
The brace of aqueducts is simulated into beam elements.
渡槽支架采用空间梁单元模拟；
Cracks in material were simulated through breaking beam elements.
材料内部裂纹通过断开梁单元来模拟。
The system was considered as a set of rigid body and elastic beam elements.
将该机划分为子结构，认为该系统是刚体及弹性梁单元的组合。
The discrete elements used are triangular plate elements and beam elements.
将此类结构离散为三角形平板元素和梁元素的集合体。
The nonlinear equation of the guyed mast is presented based on calculation models of space cable and beam elements.
将桅杆结构离散为空间纤绳单元和梁单元计算模型，建立了桅杆结构非线性平衡方程。
The general stiffness matrix of beam elements is modified to make it coincide with the actual condition of structure.
对一般的梁元刚度矩阵作了修正，使其更接近结构的实际情况。
A bus frame FEM model is built up with shell and beam elements, which is proved to be accurate by static electrometric tests.
建立了板梁单元相结合的客车有限元模型，通过静态电测试验验证了模型的准确性。
A method to compute responses of a beam with distributed material properties is presented, which effectively avoids the limitation of traditional beam elements.
给出了一种计算同一单元内具有分布材料特性的梁反应的有限元方法，有效解决了传统梁单元的局限性。
Based on the new contact model, finite element analysis scheme of drill rods in contact with curved boreholes is given using Bernoulli spatial curved beam elements.
利用新的接触模型，采用忽略横向剪切变形的三维空间曲梁单元对三维曲井内钻柱的接触非线性进行了有限元分析，给出了一套计算方法。
Based on discussion of attached plate and analysis of beam elements calculation results, a experience formula is deduced for the calculation of a beam elements inertial moment.
基于对梁元带板问题的讨论及对大量梁元的实际计算结果分析，推导出梁元惯性矩计算的经验公式。
The predicted critical buckling temperature and buckling modes for a simple model by using the beam elements are in good agreement with the finite shell element solution by ANSYS.
简单梁模型算例表明：该方法求得的各阶屈曲温度临界值和屈曲模态与AN SY S薄壳有限元解吻合较好；
The comparison of the results by using curved beam element of this paper and a broken line approximation of several straight beam elements shows that the curved beam element is much b…
按本文公式编制的曲梁单元程序的运行表明，计算一个曲梁单元和计算一个直梁单元所需的计算机时间几乎是一样的。
LaserMotive USES special cells made with arsenic and gallium, elements better able to capture the near-infra-red wavelengths of its laser beam.
而激光动机公司制造的光伏板是用砷和镓制作的，这种光伏板能更好地从激光光束中近红外分层波长中的能量。
It was modeled with 102,109 nodes and 109,834 elements, including beam, shell, solid and spring elements.
整个模型共有102,109个节点，109,834个单元，包括壳单元，体单元、梁单元、弹簧单元等单元类型。
The critical part of this sight is a holographic optical elements combined with a lensless Fourier transform hologram and a holographic beam transformer.
瞄准具的核心部件是由一块无透镜傅里叶变换位相全息图和一块全息光束变换器组成的全息光学元件。
The structure is resolved into several compound elements and every compound element consist of three parts: arch, trussed beam and lateral brace.
整个结构划分为若干组合单元，每个组合单元包括拱、桁梁及竖杆横撑架三部分。
Through careful design of architectural elements like beam, column and facade panel, the structure exposes itselfshowing the naturebeauty of the building.
通过对梁、柱、板等基本建筑元素的细节化处理，让结构直接呈现出建筑的本真之美。
Structural elements contain bar, plane beam, space beam, triangular and rectangular plates with membrane stresses, rectangular plate element with bending deformations.
结构元素包括杆元、平面梁元、空间梁元、平面三角板元、平面矩形板元和弯曲矩形板元等。
Force - measuring elements employ either a cantilever beam or a column arrangement.
测力元件采用悬臂梁或柱的形式。
The 45 CM X 45 CM columns and vaulted edge beam are expressed on the façade as structural elements.
45*45厘米的柱子和拱形边梁出现在外立面，作为结构的基础构成。
Making an example of finite element analysis for a RC deep beam, the author compares and analyzes the feature, accuracy and reliability of these elements.
然后用一个RC深梁的例子，比较分析了三类单元的特点以及计算结果的精确度和可靠性。
When treating the finite element models of the composite structure, this paper presents a "virtual beam" element mode relaxation method for the accordance of different elements.
在处理组合结构有限元模型时，对不同类型单元之间的协调提出一种“虚梁”单元节点松弛方法。
Based on HIO algorithm, binary optical elements for spatial beam shaping are designed. For Gaussian beams, the shaping result is put forward through two different ways.
基于HIO算法，设计了用于光束整形的二元光学元件，从两条不同的途径给出了高斯光束的整形结果。
Moreover, wa have calculated some sets of local bump orbit coefficients with the matrix elements, with which a local beam orbit correction has been successfully carried out.
并利用最小二乘法计算得到三个校正铁的凸轨系数，用于束流闭轨的局部凸轨校正，取得了预期的效果。
The combined structures which are made of bar, beam, membrane, plate and shell elements are used broadly in engineering.
杆、梁、膜以及板壳等多单元组合结构被广泛地应用到工程实际当中。
The electric current and alloy elements in powder system are major factors for influencing melt viscosity in surface metallurgy by plasma beam.
影响等离子表面冶金熔池中合金熔体粘度的主要因素是电流和粉末体系中的合金元素。
The electric current and alloy elements in powder system are major factors for influencing melt viscosity in surface metallurgy by plasma beam.
影响等离子表面冶金熔池中合金熔体粘度的主要因素是电流和粉末体系中的合金元素。
应用推荐