Numerical simulation was made with ANSYS software.
通过ANSYS软件进行了温度场数值模拟。
Then it is solved by finite element method of ANSYS software.
并使用ANSYS有限元软件求解该数学模型。
The FEM model of rapier loom frame is established with ANSYS software.
利用ANSYS软件建立了剑杆织机机架的有限元模型。
The result from ANSYS software analysis is quite close to the reality.
结果表明，通过ANSYS软件分析的结果与真实情况很接近。
Contact problem of two long cylinders is analysed using ANSYS software.
以点—面接触为例，运用ANSYS对两长圆柱体的接触问题进行分析。
Rolling press process of spiral grooved tube was simulated by ANSYS software.
利用ANSYS有限元分析软件，对螺旋槽管材滚压成型过程进行了数值模拟。
This article adopts the ANSYS software to simulate the magnetic field in transformer.
本文采用ANSYS软件，对变压器内部的磁场分布进行了模拟。
Microchannel model, water-cool laser diode, ANSYS software in design of microchannel condenser.
微通道冷却器的设计采用微通道模型、水冷式激光二极管，用ANSYS软件进行设计。
Stresses within the connecting rod which bears complex forces are calculated by ANSYS Software.
并采用ANSYS软件对其受力复杂的零件连杆进行了应力计算。
The method and procedures of establishing load-deflection model by using ANSYS software are described.
使用该模型可进行矫直行程的计算，解决了有限元方法在自动矫直机上的应用问题。
The crack driving force parameter (J-integral) is calculated and analyzed using ANSYS software in this thesis.
本研究利用ANSYS有限元软件计算和分析裂纹驱动力参量J积分。
In this dissertation we will study the interval flow of hydraulic torque converter with UG and ANSYS software.
本文在UG和ANSYS软件的基础上对液力变矩器的内部流场进行研究。
In this paper, the statical stresses of the C-arm is studied through using ANSYS software by FEM and experiment.
本文采用有限元分析方法，运用ANSYS软件，对C臂的静态应力进行了深入的研究。
Methods To establish the models of mandibular symphysis fracture rigid internal fixation RIF using ANSYS software.
方法：利用ANSYS软件建立下颌骨颏部骨折及坚强内固定的三维有限元模型。
How to calculate thermal creep stress filed of early-age concrete considering temperature effect by ANSYS software.
如何基于ANSYS软件平台进行考虑温度影响效应的混凝土结构早期温度徐变应力场的计算。
The thermal stress during spraying is simulated and analyzed by element birth and death method with ANSYS software.
本文运用ANSYS软件，采用死活单元法对离子喷涂的涂层热应力进行了有限元计算，并进行了定性的分析。
Additionally, this paper is adopted ANSYS software to optimize the upper frame, and obtained more feasible cross size.
此外，本文还利用ANSYS软件中的优化模块对上部排架进行截面优化设计，得出了比较合理的截面尺寸。
With help of ANSYS software, the short circuit electromagnetic force is calculated and analyzed for an enclosed busbar.
借助ANSYS软件对封闭母线进行短路电动力计算和分析，并与理论计算值进行比较。
Analysis of hot spot resulting from core during casting process was conducted by ANSYS software aiming at the boss hot spot.
以凸台型热节为对象，采用ANSYS软件对铸造过程中由于型芯形成的热节进行分析。
The temperature change of knitting needles during quenching in the mesh-belt furnace was simulated using the ANSYS software.
针对织针网带炉淬火，利用有限元分析软件ANSYS，对织针加热过程中的温度变化进行了模拟。
The article makes the finite element analysis to the turning arm bearing of the star wheel speed reducer by the ANSYS software.
本文应用ANSYS软件，对星轮减速器的转臂轴承组件进行有限元分析。
By using ANSYS software as a development platform, finite element analysis and optimal design is made to some packing machinery parts.
以ANSYS软件为开发平台，对某包装机械的零件进行了有限元分析和优化设计。
So the paper attempts to analyze the nonlinear properties of prestressed concrete beams and slabs subjected to fires by ANSYS software.
因此，本文就应用ANSYS软件对火灾下预应力混凝土梁板非线性分析进行了尝试。
The modal and harmonic response analysis of the structure were implemented using the finite element analysis method with ANSYS software.
使用有限元分析软件ANSYS对结构建模，并进行模态和谐响应分析。
The results of transient temperature field calculated by finite difference method and ANSYS software agree with the experimental results.
高压氮气淬冷温度场的有限差分法计算结果和ANSYS有限元分析软件计算结果与实测结果吻合较好。
Under the simple harmonic vibration, the stable forced vibration of multiple-degree-of-freedom system is analysed by using ANSYS software.
运用ANSYS软件分析多自由度系统在简谐激励作用下的稳态受迫振动。
The results show that the accuracy for crack tip stress intensity factor using ANSYS software is enough for engineering designs and analysis.
研究结果表明，ANSYS程序裂纹尖端应力强度因子计算方法的计算精度可以满足工程设计和分析需要。
Make use of ANSYS software, Investigations are made on the stiffness analysis of the main machine replacement parts for parallel machine tool.
利用有限元分析软件ANSYS，对并联机床的主要部件进行静刚度有限元分析。
This article, based on ANSYS software, has set up the entity unit model of the frame structure, and made a research on static and dynamic analysis.
本文基于ANSYS软件建立了车架结构的实体单元模型，对汽车车架结构进行静力和动力分析的研究。
This article, based on ANSYS software, has set up the entity unit model of the frame structure, and made a research on static and dynamic analysis.
本文基于ANSYS软件建立了车架结构的实体单元模型，对汽车车架结构进行静力和动力分析的研究。
应用推荐