SBC: Is universal, Medium life and hardness.
通用型，软硬适中使用寿命一般。
And above all she had her mother's pride and hardness.
最重要的是，她继承了母亲的强硬和傲慢。
Improve the testing equipment, magnetic detection machines and hardness.
检验设备完善，有磁粉探伤机和硬度计。
No abnormity was found in the metallographical analysis and hardness test.
金相和硬度分析未发现明显异常组织和硬度分布。
Cast iron manhole cover of good quality is to see its toughness and hardness.
质量好的铸铁井盖是要看其韧度和硬度的。
When the RE metal salt was 2%, the coating had the best density and hardness.
当稀土金属盐加入量为2%时镀层密度最大、显微硬度最高。
It has the same brilliance and hardness of a diamond at a fraction of the cost.
它具有相同的华晨和硬度的钻石在一小部分的成本。
Special brass and call special brass, its strength and hardness, strong corrosive.
特殊黄铜又叫特种黄铜，它强度高、硬度大、耐化学腐蚀性强。
This failure analysis was performed by using macro check, micrography and hardness measurement.
采用宏观分析、显微检验和硬度测定对压铸模进行了失效分析。
Next, consider the effect of the thickness of plates on the microstructure and hardness in HAZ.
并藉著板厚的改变探讨其对热影响区之金相组织与硬度造成之影响。
To solve the north high hardness of water quality, and hardness of the water quality in the south.
能够解决北方高硬度水质，以及南方中硬度水质。
Another quality of line that's more difficult to achieve is variation in the softness and hardness.
线的另一性质更加难以企及，那便是软硬的变化。
In amphibole cleavage, gloss and hardness and therefore easy to pyroxene similar confusion and pyroxene.
角闪石在解理、光泽、硬度上与辉石相近，因此易与辉石混淆。
The effect of grinding depth on work piece surface hardness and hardness layer depth is important factor.
磨削深度是影响工件表面硬度和磨削淬硬层厚度的主要因素。
The relationships of current density with deposition rate, crystal size and hardness of deposit were studied.
研究了电流密度与沉积速度、晶粒尺寸及镀层硬度的关系。
The microstructure and hardness of the laser modified surface are governed by the laser processing parameters.
激光表面改性层显微组织与显微硬度受激光处理工艺参数的控制。
The effects of pulse peak current density on the texture and hardness of electrodeposited Ni were investigated.
考察了脉冲峰值电流密度对纳米晶镍镀层织构和硬度的影响。
Through the procedures, the toughness and hardness of the material have got a better synthetical applying field.
该热处理工艺使材料在韧性和硬度方面达到了较好的综合性能应用范围。
Fatigue tests were performed using the 3d dumbbell specimens with different levels of maximum strain and hardness.
使用具有不同最大应变和各种硬度的3d哑铃状试样进行了疲劳试验。
The microstructure, chemical composition and hardness of cracked jaws of wire clippers were detected and analyzed.
对已开裂断线钳钳头的显微组织、化学成分和硬度进行了检测和分析。
Parameters were the shade of color and hardness of the scar tissue, thickness and size of scar, and subjective symptoms.
疗效评估参数为：疤痕组织的色泽和硬度，疤痕的厚度和大小以及主观症状。
However, early investigations showed nanocrystalline materials, while having high strength and hardness, were also very brittle.
但是，早期的调查显示，尽管它具备高强度，高硬度，但是纳米钛合金材质也异常脆弱。
The result of the microstructure and hardness anomaly in the rolling example of P91 pipe fittings be discussed and analyzed.
对P91钢管件热轧事例中产生微观组织和硬度异常的原因进行了分析和探讨；
The chemical composition, microstructure, fracture morphology and hardness of cracked S45C steel parts were tested and analyzed.
对淬火开裂的S45 C钢零件进行了化学成分、金相组织、断口分析及硬度检测。
The influence of RE on the microstructure and hardness of welded joint was studied by the experiments adding RE in electrode covering.
通过在药皮中添加稀土合金的试验，研究了稀土对高钒焊条焊补铸铁接头组织与硬度的影响。
However, the further increase in detonation frequency and gas-flow rates caused structure worsening and hardness declining of the coat.
但是当爆炸频率和气体流量进一步升高时，涂层的组织反而恶化，硬度降低。
The experimental results show that the depositing power and time have a certain effect on the depth and hardness of the deposited layer.
研究结果表明，电火花沉积功率和沉积时间对电火花沉积层的厚度和硬度有一定的影响；
The experiments consisted of the measurement of yield stress, tensile strength and hardness for samples cut from various parts of the forging.
试验包括对取自不同锻造零件的试块的屈服强度、抗拉强度及硬度的测量。
However, it is difficult for a kind of material to have high toughness and hardness on actual condition, so compounding casting often is used.
但一种材料同时具有高韧性和高硬度这两种性能在实际生产中是非常难以达到的，为此采用复合铸造工艺进行生产。
The hardening case depth and hardness curve can be changed by adjusting heating time, heating power and cooling speed during induction hardening.
在感应淬火中，通过改变加热时间、加热功率和冷却速度可以改变淬硬层深度和硬度梯度。
应用推荐