Plating frame, after bending handrails, removable foot care, solid front, pneumatic rear wheel QR, folding handle.
电镀车架，后折弯扶手，可拆脚托，实心前轮，快拆充气后轮，可折把手。
It is mainly used for the printing on metal and sheet after plating.
主要用于金属及片材电镀后产品的印刷。
Zinc plating chromic acid salt after the passivation, corrosion resistance can improve 6 to 8 times.
锌镀层经铬酸盐钝化之后，耐蚀性可提高6 ~8倍。
After the acid zinc dipping, the plating layer obtained by either electroplating or chemical plating has excellent performance.
经过酸性浸锌后无论进行电镀还是化学镀，得到的镀层性能优异。
Copper was reduced by formaldehyde which was contained in the effluent of chemical copper plating, and EDTA in the effluent was reclaimed after acidify.
探讨了利用原化学镀铜废液中的甲醛将铜还原，后酸化回收EDTA的新工艺。
This paper analyzes and discusses the size, tolerance, width and the problems among tolerances of electroplate production before and after the plating.
对电镀产品镀前与镀后零件尺寸及公差、镀层厚度及公差之间的问题及关系进行了分析与探讨。
Tin plating: Immediately after copper plating, a thin layer(0003") of tin is electroplated on the surface of the copper. Tin will act as an etch resist in a future manufacturing process."
镀锡：镀铜后在铜表面再镀上一层锡，大约3mil厚，在下工序中起到抗蚀保护线路的作用。
After chemical coloring process, the plating layer exhibited smooth and bright ancient bronze color, which improved the decorating effect of FRB products.
该仿金镀层经化学着色处理，可以获得光亮平整的古铜色外观，大大丰富了玻璃钢制品的装饰效果。
One day after plating, the cells were exposed for 2 h to various doses of ethylnitrosourea (ENU). CAs and SCEs were examined by the standard methods, while CT was determined by cell counts.
接种细胞一天后，用不同剂量乙基亚硝基脲（ENU）处理2小时，然后用标准法检查其染色体畸变和SCE率，用细胞计数法测定细胞毒性。
Spent acid after cleaning plated parts is great in quantity and can not be treated desirably in plating factories.
清洗镀件后的废酸在电镀厂中数量巨大，但又没有良好的方法加以处理。
The ceramic powder becomes magnetic after electroless plating.
化学镀后，陶瓷材料有了磁性。
The distribution of magnetic field strength in iron plating bath and the effects on current distribution after the magnetic field being impressed were also determined.
测定了施加磁场后，镀槽内磁场强度的分布情况及施加磁场对电流分布的影响。
The performance and quality of taps before and after composite plating were compared separately.
分别对比了复合镀前后的丝锥性能和质量。
After chrome plating, designated surfaces are to be free of blemishes, scratches, and other defects.
在镀铬之后，指定的表面不可以有任何的瑕疵，刮伤和其他的缺陷。
After extraction separation of gold by MIBK, lead, copper, iron, nickel in gold plating bath were determined by inductively coupled plasma-atomic emission spectrometry (ICP-AES).
研究了甲基异丁基酮(MIBK)萃取分离金，用电感耦合等离子体原子发射光谱法(ICP AES)测定镀金液中杂质元素的新方法。
Conclusion. Dynamic anterior cervical plating after anterior decompression and grafting provides comparable fusion rates to that reported following the use of rigid cervical plating.
结论：颈椎前路减压植骨后应用动力钢板，与以往报道的颈椎静力钢板相比，融合率相当。
The ironing roller is made of steel which has a mirror-like surface after chrome plating and polished.
型滚筒熨平机熨平辊采用优质钢材，表面镀铬镜面抛光而成。
Objective: To compare the fixation strength of locking and non locking anterior cervical plating initially and after fatigue.
目的：比较带锁与非带锁颈椎前路钢板螺钉系统的即刻固定和抗疲劳强度。
This article analyses the cause of cracks after brush-plating on undercarriage and brings forward ameliorative measures by experimentation.
分析了飞机起落架电刷镀后产生裂纹的原因，并通过试验的方法提出改进措施。
After the plating, corrosion resistance, heat resistance and binding strength of electrolyte copper foil were improved.
经过处理后的电解铜箔耐蚀性、耐热性和粘合强度等性能指标均有明显提高。
Generalized electroless nickel plating technology involves pretreatment technology, nickel plating technology and after treatment.
广义的化学镀镍工艺包括镀前预处理工艺、镀镍工艺和后处理工艺。
The rate capability of the alloys is improved after plating, due to the fine particles formed through hydrogen crisping and the nickel layer contributed to the conductivity of electrodes.
镀镍层有利于贮氢合金氢化物电极大电流放电，这种作用源于微包覆过程中氢脆引起合金颗粒的细化与表面镀层增强了电极的导电性。
The rate capability of the alloys is improved after plating, due to the fine particles formed through hydrogen crisping and the nickel layer contributed to the conductivity of electrodes.
镀镍层有利于贮氢合金氢化物电极大电流放电，这种作用源于微包覆过程中氢脆引起合金颗粒的细化与表面镀层增强了电极的导电性。
应用推荐