All too often, projects undergo the "gold plating" process long after deadlines and success conditions are determined.
很多时候，项目经历了“镀金”的过程，期限已经过期很久，成功条件得以明确。
It is mainly used for the printing on metal and sheet after plating.
主要用于金属及片材电镀后产品的印刷。
Zinc plating chromic acid salt after the passivation, corrosion resistance can improve 6 to 8 times.
锌镀层经铬酸盐钝化之后，耐蚀性可提高6 ~8倍。
Plating frame, after bending handrails, removable foot care, solid front, pneumatic rear wheel QR, folding handle.
电镀车架，后折弯扶手，可拆脚托，实心前轮，快拆充气后轮，可折把手。
This article analyses the cause of cracks after brush-plating on undercarriage and brings forward ameliorative measures by experimentation.
分析了飞机起落架电刷镀后产生裂纹的原因，并通过试验的方法提出改进措施。
After impurities removing and hydrophilic treatment of nano -diamond powder(ND) obtained from detonation, a stable plating bathe containing ND powder is achieved.
通过对爆轰制备的纳米金刚石粉进行去除杂质，亲水处理，制备出分散稳定的含纳米金刚石粉的镀液。
This paper analyzes and discusses the size, tolerance, width and the problems among tolerances of electroplate production before and after the plating.
对电镀产品镀前与镀后零件尺寸及公差、镀层厚度及公差之间的问题及关系进行了分析与探讨。
In our final identification card production process, the need to sign the hotel after plating, semi-finished products but also on the margin will be cut off.
在我们最后的标识牌制作过程中，需要把酒店标牌电镀结束后，还要将半成品上的余量切掉。
After extraction separation of gold by MIBK, lead, copper, iron, nickel in gold plating bath were determined by inductively coupled plasma-atomic emission spectrometry (ICP-AES).
研究了甲基异丁基酮(MIBK)萃取分离金，用电感耦合等离子体原子发射光谱法(ICP AES)测定镀金液中杂质元素的新方法。
Copper was reduced by formaldehyde which was contained in the effluent of chemical copper plating, and EDTA in the effluent was reclaimed after acidify.
探讨了利用原化学镀铜废液中的甲醛将铜还原，后酸化回收EDTA的新工艺。
The cause of cracks after brush-plating on the main speed reducer of helicopter was analyzed and the ameliorative measures by shot-peening were brought forward consolidation.
分析了直升机主减速器齿轮电刷镀修复后产生裂纹的成因，通过试验提出了喷丸强化改进措施。
After chemical coloring process, the plating layer exhibited smooth and bright ancient bronze color, which improved the decorating effect of FRB products.
该仿金镀层经化学着色处理，可以获得光亮平整的古铜色外观，大大丰富了玻璃钢制品的装饰效果。
It was proved that pitting potential become more noble and pitting resistance was improved after ion plating.
结果表明，离子镀使孔蚀电位提高，改善和提高了抗孔蚀性能。
After chrome plating, designated surfaces are to be free of blemishes, scratches, and other defects.
在镀铬之后，指定的表面不可以有任何的瑕疵，刮伤和其他的缺陷。
After the acid zinc dipping, the plating layer obtained by either electroplating or chemical plating has excellent performance.
经过酸性浸锌后无论进行电镀还是化学镀，得到的镀层性能优异。
The ceramic powder becomes magnetic after electroless plating.
化学镀后，陶瓷材料有了磁性。
Weaving: Straight twist, reverse twist, double twist, the first series after plating, after plating the first series, is divided into hot-dipped galvanized, electric galvanized, PVC coated and so on.
编织：正捻、反捻、双向搓捻、先编后镀、先镀后编，又分热镀锌、电镀锌、PVC涂塑等。
The distribution of magnetic field strength in iron plating bath and the effects on current distribution after the magnetic field being impressed were also determined.
测定了施加磁场后，镀槽内磁场强度的分布情况及施加磁场对电流分布的影响。
In addition, it introduces briefly the nitrogen and carbon co-penetration at low temperatures after the alloy plating for improving the wear-resisting and application results.
对电镀合金后进行低温氮碳共渗，提高渗层耐磨性能以及模具中的应用效果也作了扼要介绍。
The performance and quality of taps before and after composite plating were compared separately.
分别对比了复合镀前后的丝锥性能和质量。
Objective: To compare the fixation strength of locking and non locking anterior cervical plating initially and after fatigue.
目的：比较带锁与非带锁颈椎前路钢板螺钉系统的即刻固定和抗疲劳强度。
Tin plating: Immediately after copper plating, a thin layer(0003") of tin is electroplated on the surface of the copper. Tin will act as an etch resist in a future manufacturing process."
镀锡：镀铜后在铜表面再镀上一层锡，大约3mil厚，在下工序中起到抗蚀保护线路的作用。
Conclusion. Dynamic anterior cervical plating after anterior decompression and grafting provides comparable fusion rates to that reported following the use of rigid cervical plating.
结论：颈椎前路减压植骨后应用动力钢板，与以往报道的颈椎静力钢板相比，融合率相当。
In the invert and variable pulse electrical brushing plating technology experiment, after repair there are many Cauliflower-like organization dense and uniform under the metallurgical microscope;
在逆变脉冲电刷镀技术修复后，使用扫描电镜观察刷镀表面形貌，得到菜花头状的致密、均匀组织；
One day after plating, the cells were exposed for 2 h to various doses of ethylnitrosourea (ENU). CAs and SCEs were examined by the standard methods, while CT was determined by cell counts.
接种细胞一天后，用不同剂量乙基亚硝基脲（ENU）处理2小时，然后用标准法检查其染色体畸变和SCE率，用细胞计数法测定细胞毒性。
Spent acid after cleaning plated parts is great in quantity and can not be treated desirably in plating factories.
清洗镀件后的废酸在电镀厂中数量巨大，但又没有良好的方法加以处理。
Generalized electroless nickel plating technology involves pretreatment technology, nickel plating technology and after treatment.
广义的化学镀镍工艺包括镀前预处理工艺、镀镍工艺和后处理工艺。
After Plating, cleaning the coating with the corresponding removers.
电镀后，请用相应清洁剂除去涂层。
After the plating, corrosion resistance, heat resistance and binding strength of electrolyte copper foil were improved.
经过处理后的电解铜箔耐蚀性、耐热性和粘合强度等性能指标均有明显提高。
After the plating, corrosion resistance, heat resistance and binding strength of electrolyte copper foil were improved.
经过处理后的电解铜箔耐蚀性、耐热性和粘合强度等性能指标均有明显提高。
应用推荐