Based on the theory of Multi-body Dynamics, we adopt ADAMS simulation platform and establish virtual prototype of breech mechanism.
基于多体力学理论，采用ADAMS软件平台建立了炮闩系统的虚拟样机。
That respectively does the academic calculation and ADAMS simulation for steering trapezium and pitman arm mechanism, and optimizes the steering characteristics.
分别就转向梯形机构和转向摇臂机构进行了理论计算和ADAMS仿真，并对转向特性进行了优化。
Our tests continued until one afternoon, when Adams decided the simulation was ready.
我们的试验持续了一个下午，这时亚当斯断定模拟所需要的准备都已经就绪。
Ourtests continued until one afternoon, when Adams decided the simulation wasready.
那天下午我们正继续着我们的测试，亚当斯宣布我们可以开始模拟实验了。
The driving forces of some typical trajectories are analyzed. The difference between the numerical simulation result of the virtual prototype and those in ADAMS is less than 2%.
对几个典型轨迹下激励器所需的驱动力进行了数值计算分析，计算结果与基于ADAMS建立的虚拟样机仿真结果相比不超过2%。
By using the simulation software ADAMS, the performance of manipulator which employing the designed control algorithms and the selected path planning method has been discussed.
借助机械系统动力学仿真分析软件ADAMS，探讨了在计算力矩、模糊变结构控制策略和所遴选的轨迹规划方法下，机械手的控制效果。
This paper focus on establishing kinetic model and simulating kinematics by ADAMS, and analyzes the kinetic characteristic of the crank block mechanism in high-speed press through simulation.
本文建立了高速压力机曲柄滑块机构的运动学模型，并仿真分析了高速压力机中曲柄滑块机构的运动学特性。
Based on ADAMS mechanical simulation software, a microgravity environment was established by computer and some simulation study had been carried out about the lunar lander.
在机械仿真软件ADAMS基础上，用计算机建立了月球微重力环境并进行了数字仿真。
Through the analysis of the working process of this linkage system, this paper execute the dynamic simulation and optimization of this model by using multi-body system dynamics software ADAMS.
通过对肘杆系统工作过程的分析并利用多体系统动力学软件（ ADAMS）对模型进行了动力学模拟和优化设计。
This paper built the solid model of a coal car with UG software, made dynamic simulation by ADAMS, and measured the starting torque and the forces on several key parts of the coal car.
利用UG软件对运煤车进行实体建模，在AD AMS软件中对运煤车进行动态仿真，对其起动转矩和几个关键部分的受力进行了分析。
Based on the application of ADAMS in the analysis of multi-rigid (deformable) -body system, ADAMS is applied to parameterized design and simulation of a planar parallel manipulator 3-rrr.
基于ADAMS软件在多刚(柔)体系统分析中的应用，将ADAMS软件应用于平面3 -RRR并联机器人的参数化设计与仿真。
Based on an established multibody dynamics model of farm transport vehicles, with the help of the code ADAMS, the ride comfort simulation method was studied.
在建立农用运输车整车多体动力学模型的基础上，借助于软件ADAMS和笔者编制的软件研究了农用运输车平顺性仿真的方法。
On the platform of the ADAMS/CAR secondary development module, the MB dynamics simulation model of the virtual prototype of a domestic light bus has been created.
以ADAMS/CAR二次开发模块为平台，建立了国产某小型客车虚拟样机的多体系统动力学仿真模型。
Based on multibody system dynamics method and ADAMS software platform, a rigid-flexible coupling multi-body model is built for vehicle dynamics simulation.
利用多体动力学方法建立了基于ADAMS软件平台的整车刚柔耦合多体系统操纵动力学仿真分析模型。
Then carries on each maneuvering performance using ADAMS to the dummy specimen the simulation analysis, the confirmation maneuvering performance influence factor and the appraisal target.
然后利用ADAMS对虚拟样机进行各项机动性能的仿真分析，验证机动性能的影响因素和评价指标。
Introducing the dynamic simulation of ADAMS, Bringing forward a method of analyzing the plane mechanism motion using the technology of simulation.
简要介绍了ADAMS动态仿真功能，提出了应用仿真技术对平面机构进行运动分析的方法。
Based on the implementation wrong method, the paper designs and debugs the joints'controllers by use of the control system design elements in the software ADAMS, and simulation is implemented.
此外，本文还利用ADAMS环境中的控制系统设计要素对该机器人进行了基于试行错误方法的关节控制器设计和调试，并进行了仿真。
A dynamics model for that engine mount is set up and a simulation on its dynamic characteristics is conducted using ADAMS software with corresponding tests performed.
通过试验测试了电流变液力悬置的动态特性，并将仿真结果与试验结果进行了比较分析。
From view of design of experiment, the random simulation of interior ballistics repetition is done using the interior ballistic computing module developed by the dynamic simulation software-ADAMS.
从试验设计角度出发，借助动力学仿真软件ADAMS开发的内弹道计算模块，对内弹道循环进行了随机模拟。
The model of ACB mechanisms for dynamic simulation was built with multi-body dynamics simulation program ADAMS, and the dynamic characteristics were obtained by simulation analysis.
利用多体动力学仿真分析软件ADAMS，对断路器机构系统进行动态仿真建模与分析，获得其分闸过程的动态特性。
Using ADAMS software, the study simulated the process of capturing and docking. The simulation results showed the design of docking and capturing mechanism is rational.
利用ADAMS软件对整个对接捕获过程进行了仿真，验证了设计的对接捕获机构的合理性。
The ADAMS software is used to build dynamics simulation models of the dry dock gate system and simulation results show that these models are correctly built.
运用机械系统动力学自动分析软件ADAMS，建立了干船坞气控卧倒门系统的动力学仿真模型，并通过对仿真模型的运行，证明模型是可行的。
According to the flexible multi-body system modeling theory and ADAMS flexible modeling method, the ADMAS, MATLAB and ANSYS combined simulation model of the flexible MSR system is established.
根据多柔体系统动力学建模理论以及ADAMS的柔性体建模方法，建立了柔性磁悬浮转子系统的ADAMS、MATLAB和ANSYS联合仿真模型。
After analyzing kinematics and dynamic character 3-tpt parallel machine tool developed by Northeastern University by its simulation model constructed in ADAMS, kinetic and dynamic curves are obtained.
对东北大学研制的3 -TPT并联机床，分析了其约束链对机床运动及动力学特性的影响，并在ADAMS机械动力学仿真软件上建立了仿真运动模型。
The method approaches the unknown integrating factor with Fourier Expansion and deducts a kind of computer simulation formula which is similar to the Adams arithmetic.
该方法利用傅立叶展开来逼近未知的积分项，导出一种类似于阿达姆斯方法的计算机仿真计算公式。
Finally, according to the basic parameters of test bus, we got a simulation model. We analyzed the simulation of the efficiency of the improvement in bus braking system by using the ADAMS.
最后，以试验用大客车的基本参数为建模依据，利用ADAMS软件对改进后的大客车制动效能进行了仿真分析。
The reason of wheel sinkage on loose soil is analyzed, and the wheel-soil interaction model is built. A dynamic simulation model is developed with the equivalent conversion method in ADAMS.
通过分析松软月面上车轮下陷原因，建立了车轮与月面相互作用模型，在此基础上对ADAMS进行二次开发，通过等效转换建立了松软月面上月球车仿真模型。
ADAMS, we build parameterized simulation model of biped walking robot, proceed gait planning and simulation experiments in the simulation surrounding, and get some experiment results.
ADAMS中建立两足步行机器人并联机构腿的可参数化仿真模型，并在仿真环境下对步行机器人的行走姿态进行了规划和仿真试验，得出试验结果。
A handling simulation multibody model of a midibus is built using ADAMS/VIEW after we consider the steer system, front and rear air suspension.
在详细的考虑转向机构、前后空气悬架、车身等部件的基础上，利用ADAMS/VIEW软件建立了某中型客车的操纵稳定性多体模型。
In this paper, the virtual prototype of fuze setback-pin was established in ADAMS software, the dynamic simulation was made in the case of the accident drop and projection of the cannonball.
文中在ADAMS中建立了引信后座销的虚拟样机模型，分别对勤务处理的偶然跌落和弹丸发射期间的高过载情况进行了仿真计算，分析了仿真结果，得出的结论对实际工程设计具有指导作用。
应用推荐