但60和70年代，许多科研实验室早期的硫化镉薄膜技术试验结果都未尽人意。
But cadmium sulphide, an early thin-film technology that was pursued in the 1960s and 1970s in many research laboratories, did not live up to expectations.
介绍了一种用于MEMS薄膜材料力学特性测试的单轴拉伸试验方法。
A uniaxial tensile test method for measuring mechanical properties of MEMS thin film materials is presented.
当他想过滤掉水继续试验的时候，他发现留在过滤纸上的不是羟基磷灰石粉末，而是形成了一张薄膜。
While he wanted to filter out the water and continue the experiment, he found that instead of getting hydroxyapatite powder on the filter paper, a film formed on the paper.
对软基底薄膜热敏电阻器的可靠试验进行了研究，由试验数据找出失效原因，并提出改进措施。
Reliability test of flexible substrate thin-film thermistor is researched. The reasons of failure from the testing date are found and improved advices are pointed out.
碳黑加色乙烯塑料薄膜的吸收系数的试验方法08。
Carbon Black Pigmented Ethylene Plastic Film, Test Method for Absorption Coefficient of 08.
另外，通过土埋试验也证明了降解薄膜具有较好的生物降解性能。
In addition, degradation test in soil also proves that the degradable film has good biological degradability.
通过用金刚石薄膜涂层刀具对含硅量不同的硅铝合金进行干切削试验，探讨其切削性能。
Using diamond film coated tool, the dry-cutting tests are carried out on Si-Al alloy with different Si-contained. The cutting properties are studied.
文中通过用金刚石薄膜涂层刀具对含硅量不同的硅铝合金进行干切削试验，探讨其切削性能。
In this paper, the dry-cutting tests were carried out by diamond film coated tool on Si-Al alloy and this tool's cutting properties were studied.
介绍日本有关超高压薄膜电容器产品标准、试验方法、材料要求、产品设计原理及工艺方法等。
This paper presents an overview of related Japanese product standard, testing method, requirement for material, design theory and technological process for very high voltage film capacitor.
经流动性、吸湿性及相容性等试验研究，确定了较合理的处方，采用粉末直接压片工艺与薄膜包衣技术。
We studied the exipients and the formulation on the basis of many tests, the result of preparation procedure was powder press tablet directly and film coating technics.
为了阐明薄膜作用的影响及其和边界约束的关系，所有的试验都分别用几何线性以及非线性的板单元进行了分析。
In order to illustrate the influence of membrane action and its relationship with boundary restraint, all cases have been analyzed using both geometrically linear and non-linear slab elements.
对其中最主要的两项技术——蒸汽吞吐同时添加薄膜扩散齐和泡沫蒸汽驱的现场试验结果与经济效益进行了较详细的叙述。
The results of field tests and economic data of two important techniques, cyclic steam injection with addition of TFSA (thin film spreading agents) and foam steam flooding, are described in detail.
本文报道了全息激光防护薄膜对强功率激光的防护效果试验。
In this paper, the testing on protective effect of laser resisting holographic protective film against powerful laser irradiation has been reported.
利用费克定律，对用薄膜包装的金属试样在盐雾箱试验中的加速倍率进行了推导。
By Fick's Law, the accelerated ratio was deduced in the salt fog box on metal sample packed in film.
译文：气体透过率(GTR)：在试验环境下，在单位时间内、单位面积上透过塑料薄膜两平行平面的特定气体总量。
Gas Transmission Rate (GTR) : the quantity of a given gas passing through a unit of the parallel surfaces of a plastic film in unit time under the conditions of test.
译文：氧气透过率（O2GTR）：在试验环境下，在单位时间内、单位面积上透过塑料薄膜两平行平面的氧气总量。
Oxygen Transmission Rate (O2GTR): The quantity of oxygen gas passing through a unit area of the parallel surfaces of a plastic film per unit time under the conditions of test.
试验结果表明，在一定的工艺条件下，通过对基片的加热控制可以获得单一方向生长的柱状晶结构薄膜。
Under the given conditions, we can get films of columnar crystals of growth of single direction by controlled heating of substrate.
通过玻璃纤维增强塑料的车削试验，研究了薄膜与基体之间的附着强度、涂层刀具的磨损和加工工件的表面粗糙度。
The adhesive strength of the films to the substrates, diamond-coated tool wear and surface roughness of the workpiece were further studied by turning glass fiber reinforced plastic cylindrical bars.
石油沥青薄膜烘箱试验是重交通道路石油沥青和道路石油沥青的重要检测项目之一。
Asphalt Thin Film Oven Test Method is an important inspection item of heavy traffic paving asphalt and paving asphalt.
通过AFM研究了试验参数对薄膜表面微观形貌的影响，并对其浸润性能以及摩擦学性能进行了研究。
The influence of experimental parameters upon the morphology of the target films has been studied by using AFM.
文章介绍了一种利用普通的智能电子拉力试验机配以计算机来计算塑料薄膜拉伸弹性模量的方法。
This article introduces a method to determine the plastic membrane tensile modulus by using a normal mart electron tensile testing machine and computers.
通过旋转薄膜烘箱老化试验(rtfot)和荧光紫外老化试验(QUV)对阻燃sbs改性沥青的老化性能进行了试验评价。
The rolling thin film oven test (RTFOT) and fluorescence ultraviolet aging test (QUV) were adopted to evaluate aging property of flame retarded SBS modified asphalt.
试验表明改性粉石英填充pe薄膜，具有较好的工艺性能，薄膜力学性能优良，生产成本低。
The active Powder quartz fill in PE film have better machining and mechanics capability and produce cost be low.
采用沥青薄膜加热试验和紫外线老化试验，对沥青的针入度、软化点、延度和粘度等性能指标进行了试验研究。
By thin film oven test and ultraviolet photooxidation test, asphalt performance indices were studied, including penetration, softening point, ductility and viscosity.
试验结果表明，随着质量分数的增加，聚氨酯薄膜的透湿量逐渐减小；
The influences of PU mass fraction and the time of repose on the moisture vapor permeability of PU thin membranes were studied.
由试验可知，薄膜透过率随溅射气体总压的升高而升高。
The results show that the transmittances of the films are higher and higher with the sputtering total pressure increase.
纳米压痕试验结果表明，通过改变沉积负偏压和C_2H_2流量可以提高薄膜的硬度和弹性模量。
The nano-indentation results show through changing the deposited voltage and C_2H_2 gas flux rate could increase the hardness and elastic modulus of the films.
作者在风洞中做了贴及不贴微肋薄膜平板试验对比。
The authors also tested the flat plates with and without the Biblets drag Reduction Film in wind tunnel and compared their fluid drags.
应用低离子强度溶液能提高凝集试验的灵敏度。本实验采用低离子强度溶液及蛋清薄膜固定解离法对保存1～6年的258份血痕进行MN血型盲测。
The absorption-elution test using low ionic strength solution (LISS) has been compared with the test using normal saline in MN typing of 258 bloodstain samples stored 1 to 6 years.
应用低离子强度溶液能提高凝集试验的灵敏度。本实验采用低离子强度溶液及蛋清薄膜固定解离法对保存1～6年的258份血痕进行MN血型盲测。
The absorption-elution test using low ionic strength solution (LISS) has been compared with the test using normal saline in MN typing of 258 bloodstain samples stored 1 to 6 years.
应用推荐