本文给出一种以氰基胺固化的水下环氧胶粘剂的配方。
The compounding of the underwater epoxy adhesive cured with cyanamide is given in this paper.
吸水性材料对水下环氧胶粘剂的粘接强度起增强的作用。
The water-absorbing material can play the role of improving the bonding strength of the epoxy adhesive in water.
研究结果表明：增强材料对环氧胶粘剂的改性效果显著。
The results show that: The effect of reinforced materials modified epoxy adhesive is remarkable.
环氧胶粘剂的耐蚀性能是通过测定其拉伸剪切强度来评定的。
The corrosion resistance of epoxy adhesive was assessed by its tensile shear strength.
介绍了高效环氧胶粘剂的配制及其在煤气管道修补中的应用效果。
The compositions of high efficient epoxy adhesive and its application in repairing of gas piping were introduced in this article.
为此，本文综述了近几年国内外水下环氧胶粘剂的研制及应用状况。
Therefore, this article summarized the domestic and foreign development and application situation for the underwater epoxy adhesives in recent...
同时，采用分子设计与化学制备技术制备环氧胶粘剂，具有高强高韧高填充比等特点；
Moreover, the epoxy adhesive with high intensity, high toughness and high fill factor is made by molecule design and chemical production technology.
石油发酵尼龙改性环氧胶粘剂是一种胶接强度高和抗冲击性能、耐湿热性能好的胶粘剂。
Petroleum-fermented nylon modified epoxy adhesive has high bonding strength and good shock resistance, moisture-proof and thermal stability.
结果表明，在相同固化条件下，纳米微波吸收剂能明显降低改性环氧胶粘剂的微波固化时间。
The results show that nanometer microwave-absorber can obviously decrease the microwave curing time of modified epoxy adhesive under the same curing condition.
根据车间内钢梁上吊车轨道安装底板与钢梁粘接的具体要求，研制了一种中温固化双组分环氧胶粘剂。
A novel two-component epoxy adhesive with high adhesive strength was developed to meet the bonding requirement of mounting plate of crane rail and steel beam in the workshop.
环氧胶接接头在水中破坏失效的原因主要是渗入到胶接层的水分子取代了胶粘剂分子在金属表面的粘附。
The reason of the failure of epoxy bonded joint in water was that the epoxy adhesive on the metal surface was substituted for water.
研究了氧化剂、还原剂以及温度对环氧丙烯酸酯胶粘剂性能的影响。
The effect of the oxidant, the reductant, and the temperature on the performance of the adhesive were investigated.
本文利用空间环境效应地面模拟设备对环氧结构胶粘剂进行了真空热循环试验。
In this paper, using ground-based simulation facilities, the vacuum thermal cycling test was carried out on the epoxy construction adhesive.
合成了两种硅氧烷环氧固化剂，并研究了它们对环氧树脂胶粘剂的粘接强度、折射率、透光性等方面的影响。
Two siloxane epoxy curing agents were synthesized, and the effects of the products on the adhesive strength, refractive index and transparence of epoxy adhesive were studied.
间苯二酚二环氧醚胶粘剂是一种室温固化高强度胶粘剂。
Resorcin diepoxide ether adhesive is a high strength adhesive curing at room temperature.
本文研究一种环氧-酚醛胶粘剂的高效固化剂np，该固化剂与环氧、酚醛这两种树脂，均具有较高的反应活性。
Curing agent named Hardener NP was synthesized in laboratory, it was suitable for curing epoxy resins as well as phenolic resins, with higher reactive rate.
论述了酚醛-环氧结构胶粘剂的制备原理及工艺，讨论了影响酚醛-环氧结构胶粘剂的性能因素。
Preparation of phenolic aldehyde-epoxy structural adhesive was elaborated and the factors which effect the properties of this adhesive were primarily discussed.
但是粘贴碳纤维布的环氧类胶粘剂在高温下会很快软化，严重影响加固结构的火灾安全。
However, the epoxy resin used to stick CFS will intenerate soon under high temperature, which seriously affects the fire safety of strengthening structure.
研究了氧化剂、还原剂以及温度和放置时间对环氧丙烯酸酯胶粘剂性能的影响。
The effect of the oxidant, reductant, temperature and the time of placement of felted sample on the performance of the adhesive were investigated.
胶粘剂分子链的降解是环氧胶接接头胶接性能降低的主要原因。
The reason for reduction of bonding performance of epoxy bonded joint was the degradation of epoxy adhesive.
介绍了一种研制的室温固化、耐高温、耐低温环氧有机硅胶粘剂。
Mechanical property of high-and low-temperature resistant epoxy silicone adhesive cured at room temperature;
本文利用空间环境效应地面模拟设备对环氧结构胶粘剂进行了真空热循环试验。
Study on preparation and properties of heat-resistant epoxy adhesive cured at room temperature;
本文利用空间环境效应地面模拟设备对环氧结构胶粘剂进行了真空热循环试验。
Study on preparation and properties of heat-resistant epoxy adhesive cured at room temperature;
应用推荐