介绍了用烧结法或高频熔封法制作光窗（透镜）。
This article introduced that lens is produced by heat sealing and high frequency sealing methods.
进行了苏打烧结法处理低品位钨矿和废钨渣的研究。
Study is made for processing low grade tungsten mineral and waste residue of tungsten by soda sintering.
合成铝镁尖晶石的两个主要方法是烧结法和电熔法。
Synthesis of magnesium aluminium spinel and fused two main methods are sintering method.
铸造烧结法是一种制备铁基表面复合材料的新工艺方法。
Casting sintering is a new technique by which iron-based surface composites are produced.
研究了烧结法处理铝土矿，烧结块碱浸，渣酸浸的工艺。
Research is made on the process of bauxite ore sintering, followed by agglomerate alkaline pickling, residue acid leaching.
介绍了石灰分加小球团烧结法研究的成果及工业应用情况。
This paper describes the results of study on MPS process with divided hydrated lime addition and its industrial application.
研究了烧结法制备的六钛酸钾晶须（PTW）中的水溶钾。
Water soluble potassium ions in potassium hexatitanate whiskers (PTW) of calcination synthesis were investigated in this paper.
采用两步烧结法制备了新型的钛合金牙根种植体表面复合涂层。
A new composite sintered coating on artificial roots of tooth made of titanium alloy was made by a two step sintering method.
通过料层温度测试、分析和对比，发现其固结方式类似于传统烧结法。
It was found through measurement, analysis and contrast of the heating patterns in the beds that the agglomerating mechanism of PSP is similar to that of conventional sintering process.
进行了高温烧结法在钢基体的表面上制备钛铁合金涂层的新工艺研究。
A new technology for preparation of Ti-Fe alloy coating on the steel substrate was investigated by high temperature sintering method.
以铌钽尾矿为主要原料，采用烧结法研制硅灰石为主晶相的微晶玻璃。
Using Ni-Ta tailing as the main raw materials, glass-ceramics in which wollastonite is a primary crystalline phase were developed.
在真空电炉中利用机械合金化和热压烧结法制备出纳米晶块体钨铜合金。
Nanostructured bulk of W-Cu alloy was prepared by mechanical alloying and hot pressed sintering.
对铸造烧结法制备铁基表面复合材料，表面复合层的点火特征进行研究。
The casting-infiltration method is one of the main means of preparing particles reinforced surface composite.
目的研究退火制度对一次烧结法制取铁尾矿建筑微晶玻璃裂缝产生的影响。
The effect of the annealing treatment of the metal tailings architecture-glass-ceramic produced by one time sintering forging on cracks is researched.
本文就反应硼化烧结法的理念，新型硬质合金的种类、性能和应用做综述。
The concept of reaction boronizing sintering technique, properties, kinds and applications of new type cemented carbide are reviewed.
以铁铝尖晶石和镁砂为原料，采用烧结法制备了氧化镁铁铝尖晶石耐火材料。
The magnesia-hercynite refractories were prepared with magnesia and hercynite by sintering process.
采用两步烧结法烧成的钛合金牙种植体表面与复合涂层结合强度及结合机理。
The mechanism and integrating strength of the composite coating with the surface of cobalt alloy dental implant made by a two-step-sintering method were studied in this paper.
采用固相烧结法合成了不同镧掺杂量的PZN - PZ t压电陶瓷和粉体。
The La-doped PZN-PZT ceramics and their powders were fabricated using solid state sintered technology.
针对数值分析后的模型，采用激光选区烧结法快速制作零件及凹模的实体原型。
The rapid prototypes of the part and its die were fabricated by selective laser sintering (SLS), a rapid prototyping technique.
经过大量试验，证实了用石灰烧结法处理富钾板岩生产钾铝产品的工艺是可行的。
After a lot of tests, it proves that it is feasible to produce potassium and aluminium products with potassium SLATE by lime sintering process.
采用真空液相烧结法，在Q 235钢表面制备三元硼化物基金属陶瓷覆层材料。
A ternary boride cermet clad material was fabricated on the Q235 steel substrate by means of the vacuum liquid phase sintering technique.
采用含有机物的镍基高温合金原粉，用粉末烧结法制备了球形多孔高温合金材料。
The porous superalloy material with hollow spherical pores was fabricated by means of metal powder sintering using nickel-base superalloy powders.
用化学镀法制备了镍包铜粉，并利用固相烧结法将镍包铜粉成功地制成了块状烧结体。
Nickel plat copper powders were prepared by electrolytic plating and bulk sinters of nickel-coated copper powders were prepared by sintering.
根据烧结法生产建筑装饰微晶玻璃的特点，对制品码放方式及喷枪布置形式提出要求。
According to the feature of sintered decorative glass-ceramic, the requirements for the product stacking and the burner arrangement were put forward.
采用液相烧结法将爆炸压实后的钢结硬质合金粉末复合在碳钢表面，成功获得覆层材料。
Steel-bonded cemented carbide powder processed by explosive compaction was successfully bonded to the surface of carbon steel through liquid phase sintering.
针对烧结法的强碱性赤泥堆场的特性，找出一种可行的施工方法，对边坡进行复垦植被。
This research is to aim at the characteristic of red alkaline mud dump site of the sintering process, and to find a feasible method for ecological rehabilitation on the slope.
本文介绍了一种生料煤湿法后加的烧结法生料掺煤新工艺，并对其可行性进行了研究论证。
The article makes an introduction of new sintering process with wet method of coal rear-feeding in raw mix and it also verifies the feasibility.
分析了铝土矿尾矿的化学组成，并以铝土矿尾矿为主要原料利用烧结法制备出了微晶玻璃。
The chemical compositions of a bauxite tailing were analyzed. A glass-ceramics was prepared using the bauxite tailing as main raw material by sintering method.
反应硼化烧结法制备的三元复合硼化物基新型硬质合金，具有优良的物理、化学、力学性能。
New type cemented carbide of ternary complex boride base prepared by reaction boronizing sintering technique has excellent physical, chemical and mechanical properties.
针对用于烧结法碳分母液蒸发的管式降膜蒸发器加热管结垢形成的原因，采取了相应的改进措施。
Appropriate modification measures have been taken to deal with scale formation in heating tube of the tube falling-film evaporator for carbon seed pregnant liquor evaporation in sintering process.
应用推荐