探讨HVI测试棉纤维断裂比强度的影响因素。
Effect factors of cotton fiber breaking tenacity tested by HVI were discussed.
研究棉株生理年龄对棉纤维加厚发育及纤维比强度形成的影响。
Effects of physiological age of cotton plant on the physiological mechanism of fiber thickening development and fiber strength were studied.
下次你如果没有时间要翘掉锻炼的话,记得保持一贯性比强度训练更为重要。
Next time you're tempted to skip a workout for lack of time, remember that consistency can be more important than intensity.
纤维增强树脂基复合材料是一类高比强度、高比刚度的结构材料。
The fiber reinforced resin matrix composites are a kind of structural material with high specific strength and high specific rigidity.
并改善了棉纤维2.5%跨距长度、比强度和整齐度等品质性状。
Some fiber qualitative characters such as 2.5% span length, tenacity and length uniformity were improved.
低温下棉纤维发育关键酶活性及其表达对棉纤维比强度形成的影响。
Effect of the key enzymes activity and the genes expression involved in the fiber development on the fiber strength formation in low temperature condition.
相对于常规高强度钢,这些无定形钢具有提高的比强度和耐腐蚀性。
These amorphous steels have increased specific strengths and corrosion resistance compared to conventional high strength steels.
如果焊缝的厚度比强度更重要,则在降低强度条件下可使焊缝更薄。
Where thickness characteristics AT the joint are more important than strength, a thinner welder is possible AT reduced joint strength.
研究结果表明,原砂通过擦洗脱泥处理,就可使树脂砂的比强度大为提高。
The results of this investigation show that the specific strength of resin bonded sand will increase remarkably, if the raw sand processed by wet attrition.
本文就各种强力仪测定棉纤维断裂比强度指标具有一致性的问题进行研究。
In this paper, the problem of consistency is investigated for the specific breaking strength of cotton measured on different tensile testers.
纤维断裂比强度随铃龄增大而升高;相同铃龄随温度下降断裂比强度降低。
While fibre break strength was increased with cotton boll age, it was reduced when temperature dropped.
钛合金以其比强度高、耐腐蚀性好等特点在航空航天领域得到了广泛的应用。
Because of their excellent high specific strength and corrosion resistance, titanium alloys are widely used in aerospace industry.
镁合金以其高比强度、比模量和优异的力学性能,已在众多领域受到广泛关注。
Because of high strength rate, high modulus rate and excellent mechanical performance, the magnesium alloy has received wide recognition in many industries.
特别是高的比强度使其成为以减轻自重为目的的汽车和航空领域的理想金属材料。
In particular, its high strength weight ratio makes it an ideal metal for automotive and aerospace applications, where weight reduction is of significant concern.
在没有纯金红石型或锐铁矿型标样的情况下,利用线性回归方法求出参比强度K。
The reference intensity K has been obtained by means of linear regression without available the pure rutile or the pure anatase.
钛基复合材料是一种新型的、具有重量轻、比强度高、耐腐蚀等多种优异性能的复合材料。
Titanium matrix composites is one of the compound material which has many kinds of outstanding performance.
钛材的比强度高,高温和低温力学性能好,在大多数酸、碱、盐介质中具有优良的耐腐蚀性能。
The specific strength of titanium is high, and has a good corrosion resisting property in most mediums of acid, alkali, and salt service.
前言:自然界广泛存在的植物纤维的形态具有长径比大, 比强度高, 比表面积大等优点。
The configurations of vegetable fibers that exist widely in the nature have many advantages: great length-diameter ratio, high specific strength, large specific area etc.
蜂窝夹层板具有低密度、高比强度、高比刚度以及可设计性等优点,在航空航天领域里广泛应用。
Honeycomb sandwich plate has many advantages such as low density, high strength ratio and high stiffness ratio.
钛合金具有密度低、比强度高、抗腐蚀性能优异等一系列特点,是先进飞机制造中重要的结构材料。
The titanium alloy, as an important structure material during the manufacture of advanced aircraft, provided the light density, high specific intensity and excellent resistance to corrosion.
分别从胶砂强度值、胶砂抗压强度比和比强度指标三方面分析磨细锶渣作为水泥掺合料的活性效应。
Effects of the activity of ground-strontium slag as cement admixture were analyzed from three aspects: mortar strength value, compressive strength ratio of mortar and specific strength indicators.
虽然具有良好的比刚度、比强度,然而PMMC的低塑性和低韧性一直是阻碍其进一步应用的障碍。
Although has the good specific stiffness and specific strength. However, low plasticity and low toughness of PMMC, has been an obstacle to hinder its further application.
产量与纤维比强度和麦克隆值均呈正相关,抗虫杂交棉仍然存在纤维长度、强度与细度不协调的问题。
The lint cotton yield was positive with fiber strength and micronaire. The correlation among fiber length, strength and fineness of insect-resistance hybrid cotton were still inconsistent.
镁合金是比重最轻的结构材料,具有高的比强度、比刚度和良好的磁屏蔽性、阻尼性、切削加工性等优点。
As the lightest constructional material, magnesium alloy has high specific strength, high specific stiffness, good magnetic-shielding ability, good damping ability, and good machinability.
通过良好的界面控制,可显著提高复合材料的弯曲强度和弯曲模量,模量的提高比强度的提高幅度更大。
Flexural strength and modulus of super-hybrid composite can be improved greatly by the better interfacial control. And the increasing rate of flexural modulus is more than that of flexural strength.
通过正交试验分析了回潮率、相对湿度和测试次数三个因素分别对锯齿棉和皮辊棉断裂比强度的影响程度。
Effect degree of regain, relative humidity and test number on breaking tenacity of saw ginned cotton and roller ginned cotton were analyzed respectively through orthogonal test.
因为铝合金比强度大、耐腐蚀等优良的特性,所以铝合金结构在当今社会的各个领域都发挥着重要的作用。
Because aluminum alloy have some good characters such as great intensity, corrosion resistance, the aluminum alloy structure in the various areas of contemporary society plays an important role.
镁是可被人体吸收的常量元素,且具有较高的比强度和比刚度,在医用植入材料领域具有广阔的应用前景。
Magnesium is a macroelement that can be absorbed by human bodies, and with high specific strength and stiffness, it has a broad application prospect in the field of medical implant materials.
镁是可被人体吸收的常量元素,且具有较高的比强度和比刚度,在医用植入材料领域具有广阔的应用前景。
Magnesium is a macroelement that can be absorbed by human bodies, and with high specific strength and stiffness, it has a broad application prospect in the field of medical implant materials.
应用推荐