有穷固定模是系统在输出反馈下所不能改变的极点。
The finite fixed modes of system is poles that can not be changed by output feedbacks.
这个人造支气管是用移植片固定模加固的生物材料制成的。
The artificial bronchus was made up of biological material strengthened by a stent.
脉冲固定模是系统在输出反馈下所具有的最少个数的无穷极点。
The impulsive fixed modes of system are the least infinite poles under output feedbacks.
我们描述一种有效的额窦斯滕特固定模，该模价格便宜，易于制造。
We describe a frontal sinus stent which is cheap, easily produced and effective.
介绍了辊模拔制异型钢管的特点，进行了辊模拔制和固定模拔制试验。
The paper deals with features of roll-die drawing of shaped steel tubes and experiments of roll-die drawing and fixed-die drawing.
文中利用此条件给出了广义分散控制系统的有穷固定模为全体复数的一个判据。
Based on this condition, we get a criterion when the set of the finite fixed modes of the system is equal to the set of the whole complex. Numbers.
指出辊模拔制合金钢棒材比辊模拔丝更能发挥其优越性，并提出了辊模和固定模串联组合的新工艺。
It is pointed out that roller dies are more suitable for drawing alloy steel rods than for drawing wire and thread.
采用ANSYS软件对前、后固定模板及动模板的挠度进行了有限元计算，进而求解了合模机构的系统刚度及临界角。
Utilize ANSYS to compute deflection of the each of moldboard stroke in infinite elements' method and then solve the systematical stiffness and the critical Angle of clamping unit.
医生说，“我必须要在你膝盖上固定一块石膏模，以免造成永远的伤害。”
He said, "I've got to put a cast on your ankle so that you don't sustain permanent damage."
接下来，通常用石膏模固定在受伤位置的周围。
Next, a person usually gets a cast put around the area of the break.
分别用固定长度保偏光纤和可变光延迟线实现偏振模色散(PMD)补偿的实验。
Experiments of compensation for PMD were done using fixed length of PMF and variable optical delay line, respectively.
空心型芯与固定在动模上的液压抽芯器相连。
Hollow core was linked with hydraulic loose-core implement fixed on the moving die.
固定在工作台上的滑道与滑槽可使活动凸模的运动保持较高精度。
The slideway and chute fixed on the workbench may keep a high precision for the motions of the active force plug.
最近，我从这个电视剧得到了一个角色，这要求我固定一个耳模。
Recently, I got a role from this drama series that requires me to fix an ear mould.
方法采用拓能系统的固定装置、计划系统、激光灯、弓形尺、头部模型（简称头模）模拟3DCRT的实施过程进行质量控制分组实验。
Methods To do quality control experiments to simulate the process of 3D-CRT by means of Topsland system, radiation treatment -planning system, laser light, bow form ruler, head model.
元件，该元件固定到一板状组件上的方法，组件总成及模扣。
Element, method of attaching element to plate-like component, assembly and die button.
匙座橡胶注射模采用了夹持固定的方式，将金属零件牢固地固定在动模上，以完成在金属零件上注射橡胶的注射工艺过程。
Rubber injection die of spooner thermoplastic use splinting fix method to fix the metal parts on the movable die, so as to complete the injection process procedure of injection rubber on metal parts.
辊模拉拔变形区内的应力应变分布特征完全不同于固定辊模拉拔，而倾向于轧制过程。
The distribution of stresses and strains in the deformation zone under roller dies drawing is different from that under fixed rolls drawing, but tends towards rolling.
首饰蜡镶铸造是将宝石预先镶嵌在蜡模中，铸造后金属液冷却收缩而直接将宝石固定在镶口中的工艺。
In wax setting and casting process, gemstones are pre-set in the wax models and directly set by the poured metal liquid solidifying.
流向模铸在阀体的外部，表示配置TFE阀座的固定端口。
FLOW externally molded onto the body to indicate the fixed end containing a TFE seat.
分析了冷凝器固定板的工艺性，介绍了该零件弯曲成形模的结构特点和工作过程。
The technological property of the fixing plate of the condenser was analyzed. The structure characteristics and working process of the bending die for forming the part were introduced.
同时，本文基于滑模变结构和计算智能相融合的控制技术，还分别设计了基于固定滑移率控制的ABS、TC系统。
Also, based on the combination of the computational intelligence and the sliding mode control, an ABS and a traction control (TC) systems are, respectively, developed.
于上架梁的下方固定有顶杆和凹模，于下架梁上安装有其一端部至少有一个肩凸的型芯。
An ejector rod and a female die are fixed at the lower part of the upper beam, and a mold core is mounted on the lower beam. The end of the mold core has at least one shoulder.
实践表明，采用消失模铸造生产的固定筛篦条产品表面质量、 性能指标均能保证使用要求。
Practice prove, application of casting technique of lost pattern in production of agglomeration machine trail fixed screen grate, its surface quality and pe…
所述镜头模 组和所述影像感测器固定于所述基板的同一表面。
The lens module and the image sensor are fixed on the same surface of the substrate.
该模具将凹模设计成活动式，凸模固定。
The female die was designed movable but the male die was fixed.
辊模拉拔辊拉力明显小于固定辊模拉拔。
Drawing force under free roller dies drawing is much smaller than that under fixed rolls drawing.
它们非常适合大型固定机械，清除生产线、分模和组装以及不动产，机械，工作引发输送线，产品装配，以及其他工厂的维护和操作。
They are ideal for servicing large, immovable machinery, working off a conveyor line, product assembly, and other plant maintenance and operations.
它们非常适合大型固定机械，清除生产线、分模和组装以及不动产，机械，工作引发输送线，产品装配，以及其他工厂的维护和操作。
They are ideal for servicing large, immovable machinery, working off a conveyor line, product assembly, and other plant maintenance and operations.
应用推荐