由于氢气能显著提高电弧电压，使氢等离子射流有很高的焓值，当与氩气混合使用时，其等离子射流的切割能力大大提高。
Because the hydrogen can significantly improve the arc voltage, make hydrogen plasma jet has high enthalpy, when mixed with argon plasma jet, the use of cutting ability is greatly increased.
把神经网络培训成能实现两个切割就可完成这种工作。
This would be accomplished by training a neural net to make two cuts.
直接硅片技术能直接在熔融晶中制成单片晶圆，不需要切割。
Direct wafer makes individual wafers straight from molten silicon-no cutting required.
这意味着钻石能切割其他任何表面，而且只有用钻石才能对其他钻石进行微小的切割。
That means a diamond can cut any other surface. And only another diamond can make a slight cut in a diamond.
该厂能产生80瓦功率的激光，足以用来切割钢铁和提取海水里70%的镁。
It is capable of producing 80 watts of power from the laser, enough to cut steel and extract 70% of the magnesium in seawater.
安诺夫补充道：“选择精加工那些容易被机械切割的图案，已经成为一个重要议题，尤其在喷印服务商能完成的项目和驱动轮不密封的边缘这两个方面。”
Aranoff adds that choosing to finish patterns that can be easily mechanically cut becomes an issue both on jobs a PSP can accomplish, and the driven wheel does not seal the edge.
照明能连接或者切割一个空间。
切割电流可调，能适应各种厚度板材的加工。
Cutting current is adjustable to adapt to the various thickness of sheet metal processing.
能适用于各种金属的切割。
指出此加工方案能控制常规锥度切割，同时也能加工复杂的变锥度异面工件。
The scheme can control the conventional cutting as well as antarafacial machining of the complex work.
标配电动高度调节装置及万能割枪夹紧器。可选配拆装式切割工作台。
Auto-adjust height of cutting gun and multiple torch clamp structure. Optional item: disassemble cutting table.
对裂缝切割的连续材料，在裂缝的扩展过程中能自动生成正确的流形单元。
The accuracy manifold element can be generated automatically when the continuous material is cut by crack.
本机采用变频调速，调速范围宽，能切割不同厚度的废钢，水平、垂直方向切割行程大。
So it can cut different thickness scrap steel. Its cutting route is very long in horizontal and vertical direction.
根据断裂力学原理分析了主爆药包爆炸产生的应力波及爆生气体对聚能切割裂隙进一步扩展的作用机理。
Principle analyse produce powder bag stress produced to explode involve and produce and catch gas can cut function mechanism that crack expand further gathering mainly according to fracture mechanics.
开发了能实现复杂曲面零件电火花线切割加工的多轴联动加工系统。
In this paper, the motion rules of multiple spindle linkage motion in machining complex ruled curved surfaces by WEDM was analyzed.
提供了一套线性聚能装药侵彻深度计算公式及线性聚能切割器设计参数计算方法。
A series of formulae on penetration depth of linear shaped charge and the calculation method on design coefficient of linear shaped cutter are provided.
计算结果与线型聚能射流的物理现象和规律相吻合，说明该计算模型和模拟方法合理、可行，可用于线型聚能切割器的优化设计。
The study indicates that the calculation model and simulation method are reasonable and feasible, so can be applied to the optimizing design for linear shaped charge cutter.
实验结果表明，本文方法能很好地切割浊辅音和元音，低噪声和语音段。
Experimental results show that this method can cut voiced consonants and vowels, low-noise and speech segments well, Pitch trajectory reflects the tone features about voice.
本文介绍了适用于小直径炮孔爆破的岩石聚能切割爆破技术。
Based on the principle of cumulative charge explosion, a new kind of rock cutting blasting technique, the jet perforator charge blasting in small diameter boreholes, is developed in this paper.
理论上，小型开孔切割机器人能够在任意曲面上开任意形状的孔，管端切割机器人能完成任意形状的圆管端头的切割。
In theory, the small hole-cutting machine can cut arbitrary hole on arbitrary curved surface, and the tube-end incisory robot can incise round tubes' ends of any form.
“动态倾斜切割头”可把切割头定位在一定的角度去切割，能精确地抵消水刀切割所产生的自然倾斜角度误差。
The Dynamic-Tilt jet cutter can position the nozzle at an fixed angle to cut , exactly offset the natural taper from the jet cutter.
爆破结果表明，采用聚能切割方式进行控制爆破拆除钢结构高塔是可行的。
The blasting result showed that controlled blasting by employing energy concentrating cut was feasible in demolition of high tower with steel structure.
结果：经修复的残冠残根能恢复牙体牙冠的生理形态和正常的切割、咬牙合咀嚼功能。
Results:The repaired residual coronas and roots recovered their physiological functions and the normal function of cutting, chewing and artculating.
深切割带锯有一个前置T型手柄，能更好地进行控制。
本文通过对聚能切割技术原理的介绍及在多领域中的应用，探讨了该原理在钢结构建筑拆除中的应用前景。
This essay introduces the principle of shaped charge cutting technology and its wide application, and explores the prospects of its application to steel-structured building demolition.
太阳能硅片的制造工艺主要包括硅片的切割以及绒面制备两部分。
Fabrication of solar silicon wafer consists of wafer slicing and texturing of its surface.
提出了一种基于复合工作液的、以电火花电解复合加工技术对太阳能硅片进行切割的工艺方法。
A solar wafer slicing method was studied, which was based on complex dielectric fluid and efficiency electric discharge machining (EDM) and electric chemical machining (ECM) technique.
提出了一种基于复合工作液的、以电火花电解复合加工技术对太阳能硅片进行切割的工艺方法。
A solar wafer slicing method was studied, which was based on complex dielectric fluid and efficiency electric discharge machining (EDM) and electric chemical machining (ECM) technique.
应用推荐