他们分别设计每个系统。
此次采用了传统的平、纵分别设计的方法。
The use of the traditional flat, vertical design method, respectively.
分别设计和讨论了三种不同类型的色散镜。
Three types of dispersion mirrors are designed and discussed.
针对这些突出问题，分别设计了相应的改进措施。
Based on these, improvement actions were planned in the light of these problems.
结合燃煤特点，分别设计了不同的燃烧器安装位置。
Different assembling positions for calciner are designed according to different coal characteristics.
分别设计了适合对接和角接焊缝腐蚀检测的两种传感器。
Butt contact and angular contact welding seam corrosion detection sensors were designed respectively.
分别设计了平行板、叉指下电极和栅格、条形上电极结构。
The lower electrodes are in the form of plates or interdigital structure while the upper electrode is a plate with slot or grid.
先分别设计各个不同的模块，再将这些模块组装成一个系统。
Different modules are designed respectively, and are assembled to be one system.
我们不是针对地震或飓风分别设计，而是既针对地震又针对飓风进行设计。
We do not design separately for earthquakes and hurricanes - we always design for both.
按照检测项目的要求，分别设计电流、电压、谐波的检测电路。
According to the requirement of the project, the thesis designs the detection circuit of voltage, current and harmonic separately.
高速列车的基础制动系统不能以动力车和非动力车为单位分别设计。
The foundation brake system on high speed trains can not be designed with powered car and non powered car as separate units.
对本系统所要完成的功能进行详细分析，并分别设计不同模块来实现。
The function of this system to be finished has been analysed in detail and realizes it with the different modules separately designed.
加强钢带的厚度与宽度根据管材直径、环刚度要求不同而分别设计确定。
The thickness and breadth of the steel strip is determined according to different pipe diameter and ring stiffness class requirements.
通过分析重点拥堵点段具备的典型拥堵特征，针对每个特征分别设计了判别算法。
Identification algorithms were developed in light of an analysis of the typical traffic congestion characteristics of the key congested segments and intersections.
在嵌入式系统虚拟开发环境中为软件与硬件分别设计了ESDL语言和EHDL语言。
The ESDL language and the EHDL language are defined for hardware and software in the virtual design environment for an embedded system.
分别设计了两种控制方案，即单片机控制和可编程控制器（PLC）控制，并进行了比较。
For control plan choice, the paper design two control strategy. SCM control and PLC control, finally making compare to its.
针对怠速工况分别设计了变参数PID控制系统和模糊控制系统，并进行了实车试验对比。
In this paper, both PID controller with variable parameters and fuzzy logic controller for idling model are designed and evaluated by field tests on a production vehicle.
依据介电性能数据，分别设计了单层和双层吸波材料，对所设计材料的吸波性能进行了计算。
Based on the dielectric constant, mono and double layer absorber materials were designed, and the absorber property of the designed materials was estimated.
其次，在导引段，以脉冲控制策略为前提，分别设计了指数滑移导引律和能量最优转移轨道。
Secondly, the exponential slippage guidance method and optimal energy transfer orbit are designed respectively in the homing phase.
这种方式帮助他们集思广益，设计出适用于各个媒体的创意，而不是为每一种媒体分别设计广告。
This helps them dream up ideas that work across all types of media, rather than devising separate campaigns for each one.
文章首先讲述了IGCT测试台的结构组成，分别设计了用于高压产生和高压测试的两个机柜。
The paper firstly presents the structure of IGCT test bench and its two cabinets for high-voltage producing and test circuit.
考虑到大气时空变化的复杂性，针对各个季节分别设计了基于支持向量机的预报技巧的预报模型。
Considering the complexity of the atmosphere's space-time change, we design models based on Support Vector Machine for different seasons, respectively.
基于此，本研究采用了“高校配对比较”任务和“城市配对比较任务”分别设计了两个实验研究。
For the reasons mentioned above, this study adopted "the critical pairs in the universities task" and "the critical pairs in the cities task" and respectively deigned tow researches.
基于以上分析，根据实际情况，分别设计了跨境运输数据仓库的概念模型、逻辑模型和物理模型。
Based on the above analysis, with the actual situation, this paper designs the concept model, logical model and physical model of cross-border transport data warehouse.
针对电液位置伺服系统的快速性要求和参数时变性的特点，分别设计了PID控制器和模糊控制器。
In view of the speed response requirement and the parameter time-variation of electro-hydraulic position servo system, the PID controller and the fuzzy controller are designed respectively.
我们可根据客户对钻头直径大小、排气孔数量、合金齿形状和钻头头部形状的不同要求分别设计制造。
We can design and manufacture according to customer's requirement of the Bit Dia, No. air holes, carbide button shape and the face shape.
采用电场耦合方式分别设计并加工了三个小型化性能非常突出的具有椭圆函数响应的二阶带通滤波器。
By electric field coupling, three second-order bandpass filters with elliptic function response and high miniaturization performance were design and fabricated.
首先对FIR滤波器的算法进行了改良，然后采用VHDL语言对音频处理芯片的每个模块分别设计。
Firstly, we improve the arithmetic of FIR filter. Then we design each module of the audio processing chip by VHDL.
为了完成数据的处理和交换，分别设计了时钟产生电路、100%调制信号和10%调制信号的解调电路。
In order to accomplish the data process and conversion, the clock generation circuit, 100% modulation signal and 10% signal demodulation circuit are designed.
为了完成数据的处理和交换，分别设计了时钟产生电路、100%调制信号和10%调制信号的解调电路。
In order to accomplish the data process and conversion, the clock generation circuit, 100% modulation signal and 10% signal demodulation circuit are designed.
应用推荐