Then it is solved by finite element method of ANSYS software.
并使用ANSYS有限元软件求解该数学模型。
The FEM model of rapier loom frame is established with ANSYS software.
利用ANSYS软件建立了剑杆织机机架的有限元模型。
The result from ANSYS software analysis is quite close to the reality.
结果表明，通过ANSYS软件分析的结果与真实情况很接近。
Stresses within the connecting rod which bears complex forces are calculated by ANSYS Software.
并采用ANSYS软件对其受力复杂的零件连杆进行了应力计算。
The process of local heating and local cooling on cylinder billet is analyzed by the ANSYS software.
运用AN SYS软件对圆柱体坯料局部加热和局部冷却过程进行了热分析。
The crack driving force parameter (J-integral) is calculated and analyzed using ANSYS software in this thesis.
本研究利用ANSYS有限元软件计算和分析裂纹驱动力参量J积分。
In this dissertation we will study the interval flow of hydraulic torque converter with UG and ANSYS software.
本文在UG和ANSYS软件的基础上对液力变矩器的内部流场进行研究。
In this paper, the statical stresses of the C-arm is studied through using ANSYS software by FEM and experiment.
本文采用有限元分析方法，运用ANSYS软件，对C臂的静态应力进行了深入的研究。
Methods To establish the models of mandibular symphysis fracture rigid internal fixation RIF using ANSYS software.
方法：利用ANSYS软件建立下颌骨颏部骨折及坚强内固定的三维有限元模型。
How to calculate thermal creep stress filed of early-age concrete considering temperature effect by ANSYS software.
如何基于ANSYS软件平台进行考虑温度影响效应的混凝土结构早期温度徐变应力场的计算。
With help of ANSYS software, the short circuit electromagnetic force is calculated and analyzed for an enclosed busbar.
借助ANSYS软件对封闭母线进行短路电动力计算和分析，并与理论计算值进行比较。
Eddy current testing system of carburized materials was developed by using ANSYS software as second development platform.
以通用有限元分析软件A NSYS作为二次开发平台，开发了面向渗碳材料的涡流测试系统。
In the forth chapter, the important parts of the EGO are simulated by ANSYS software in order to get the optimized result.
第四章是用ANSYS工程分析软件对氧传感器的重要部件进行模拟，得出最优化的结果，并用试验进行论证。
Analysis of hot spot resulting from core during casting process was conducted by ANSYS software aiming at the boss hot spot.
以凸台型热节为对象，采用ANSYS软件对铸造过程中由于型芯形成的热节进行分析。
The temperature change of knitting needles during quenching in the mesh-belt furnace was simulated using the ANSYS software.
针对织针网带炉淬火，利用有限元分析软件ANSYS，对织针加热过程中的温度变化进行了模拟。
By using ANSYS software as a development platform, finite element analysis and optimal design is made to some packing machinery parts.
以ANSYS软件为开发平台，对某包装机械的零件进行了有限元分析和优化设计。
We had made numerical and modal analysis on the dynamic feature of F320 model derrick with ANSYS software and modal analysis technique.
使用ANSYS有限元软件、实验模态分析技术对F320型石油井架模型的动态特性进行了数值与试验分析。
So the paper attempts to analyze the nonlinear properties of prestressed concrete beams and slabs subjected to fires by ANSYS software.
因此，本文就应用ANSYS软件对火灾下预应力混凝土梁板非线性分析进行了尝试。
The modal and harmonic response analysis of the structure were implemented using the finite element analysis method with ANSYS software.
使用有限元分析软件ANSYS对结构建模，并进行模态和谐响应分析。
The results of transient temperature field calculated by finite difference method and ANSYS software agree with the experimental results.
高压氮气淬冷温度场的有限差分法计算结果和ANSYS有限元分析软件计算结果与实测结果吻合较好。
The results show that the accuracy for crack tip stress intensity factor using ANSYS software is enough for engineering designs and analysis.
研究结果表明，ANSYS程序裂纹尖端应力强度因子计算方法的计算精度可以满足工程设计和分析需要。
The finite theory of the bucking analysis is used to calculate the bucking eigenvalue of the treated steel bent structure by an ANSYS software.
采用屈曲分析的有限元法，并利用大型有限元分析软件ANSYS对钢排架结构物爆破预处理进行了特征值屈曲分析。
This article, based on ANSYS software, has set up the entity unit model of the frame structure, and made a research on static and dynamic analysis.
本文基于ANSYS软件建立了车架结构的实体单元模型，对汽车车架结构进行静力和动力分析的研究。
This paper computes the natural vibration character? The vibration isolation effect and the shock resistance of a floating raft, using ANSYS software.
本文采用ANSYS软件对一船用辅机浮筏的固有振动特性、隔振效果和抗冲击性能进行了数值分析。
The ANSYS software is suitable for the dynamic-analysis and fatigue analysis of offshore platform, and it is an effective tool in the platform design.
ANSYS有限元软件可以方便地计算平台结构在波浪、海流载荷下的动力响应和疲劳寿命，是进行平台设计和校核的有效工具。
ANSYS software was used to simulate the distribution of the electric field in CVD diamond micro-strip detector and MSGC and to optimize the electrode design.
采用ANSYS软件模拟了CVD金刚石微条阵列探测器和微条气体室探测器的电场分布，优化了器件设计。
Taking a marine stacker as model sample, the finite element model for frame construction is established by using ANSYS software and the results are analyzed.
以某船用巷道堆垛机为模型样本，以ANSYS软件为平台建立框架结构的有限元模型，并求解分析。
Further more, using the method and ANSYS software, the Vibration behavior of the crankshaft in an one-cylinder engine and a four-cylinder engine are analyzed.
应用此方法，以一单缸发动机的曲轴及一四缸发动机曲轴为实例，采用ANSYS软件对它们的振动特性进行分析。
Further more, using the method and ANSYS software, the Vibration behavior of the crankshaft in an one-cylinder engine and a four-cylinder engine are analyzed.
应用此方法，以一单缸发动机的曲轴及一四缸发动机曲轴为实例，采用ANSYS软件对它们的振动特性进行分析。
应用推荐