钛合金车架采用无氧钨极氩弧焊接工艺。
介绍了钨极自动氩弧焊在不锈钢复合管生产线上的应用。
The application of automatic TIG welding on stainless steel compound pipes production line is introduced.
介绍了一种改进的奥氏体不锈钢的双人双面同步钨极氩弧焊工艺。
This article mainly studies one kind improved two person two-sided synchronized GTAW process for the austenite stainless steel.
在保证阴极清理作用的前提下，可以最大限度地减少钨极的烧损。
On Limiting Distribution of Partial Sum and Maximum, and Point Process of Dependent Gaussian Process;
例举了WSE- 500多功能脉冲钨极氩弧焊机故障排除的事例。
And it enumerates the troubleshootings in WSE-500 multi-function pulsed tungsten argon arc welding.
本文介绍一种新型钨极脉冲氩弧焊机，分析了基本工作原理及技术性能。
A new type of argon tungsten pulsed arc welding machine has been introduced in this paper. The basic operating principle and technical characteristics has been analyzed.
本文介绍一种新型钨极脉冲氩弧焊机，分析了基本工作原理及技术性能。
A new type of argon tungsten pulsed arc welding machine has been introduced in this paper.
针对高压空气环境的特殊性，研制了高压焊接试验舱和钨极氩弧自动焊机。
Aiming at special demands under high air ambient pressures, this paper developed the hyperbaric welding test chamber and the automatic GTAW machine.
讲述了并接电容排除W S-200钨极氩弧焊电流衰减动作失灵的方法。
This paper relates the method of excluding malfunction of current decline movement in WS-200 tungsten argon arc welding by parallel capacity C.
钨极氩弧焊是通过工件表面和电极之间气体的电离和电子的发射来引弧的。
To strike an the arc, electron emission and ionization of the gas is initiated by withdrawing the electrode from the work surface in a con trolled manner, or with the aid of an initiating arc.
在厚壁管、压力容器及电站锅炉的窄间隙全位置焊接中，钨极运动轨迹是动态的。
The synthesizing control scheme is put forward based on the requilement of narrow-gap all-position welding technology in terms of the moving track of tungsten electrode.
目前，经济实用的钨极氩弧(TIG)焊接方法是应用最为广泛的焊接方法之一。
At present, tungsten inert gas (TIG) welding method is one of the most widely used methods for its advantages of economy and convenience.
通过钨极氩弧焊试验，对焊接热影响区温度场进行分析和研究，建立了焊接热循环曲线。
The temperature field in welding HAZ was studied and analyzed. Welding heat curve was set up by argon-shielded tungsten arc welding experiment.
介绍采用药芯焊丝手工钨极氩弧焊焊接奥氏体不锈钢管道所进行的焊接试验及工艺评定。
The welding experiment and procedure qualification for manual TIG welding of stainless steel tubes with flux cored electrode is presented in this paper.
答：钍钨极仍是直流焊最常用的钨电极。但许多人开始避而远之，因为该元素具有放射性。
A: They remain the most common tungsten used in DC applications, but many people are starting to shy away because of the element's radioactivity.
利用ABAQUS有限元软件对铝合金平板钨极氩弧焊(TIG)焊接过程进行了数值模拟。
The simulation of aluminum alloy plate tungsten inert gas welding (TIG) process using finite element software-ABAQUS was researched.
此外，在焊接试验的基础上，进一步对双钨极氩弧焊降低电弧压力、减少焊接缺陷的机理进行了分析。
In addition, the mechanism of the T-TIG arc pressure reduction to make the sound weld formation was analyzed.
研制的ZX5一800D电源在进行钨极氩弧焊、手工电弧焊、碳弧气刨及埋弧焊时均获得满意的性能。
The developed welding power source ZX5-800Dshows a satisfactory performance in the welding process of TIG. Shield metal arc, submerged arc and the. carbon arc air gouging.
研制的ZX5一800D电源在进行钨极氩弧焊、手工电弧焊、碳弧气刨及埋弧焊时均获得满意的性能。
The developed welding power source ZX5-800Dshows a satisfactory performance in the welding process of TIG. Shield metal arc, submerged arc and the. carbon arc …
研制的ZX5一800D电源在进行钨极氩弧焊、手工电弧焊、碳弧气刨及埋弧焊时均获得满意的性能。
The developed welding power source ZX5-800Dshows a satisfactory performance in the welding process of TIG. Shield metal arc, submerged arc and the…
对补焊工艺方法的选择作了比较，具体阐明了采用手工钨极氩弧焊的补焊工艺方法，实践证明，效果良好。
The selections of repair welding technology are compared, and the repair welding technology using handwork gas tungsten arc welding is detailed. The result with good effect is got.
针对造成双弧现象的原因，模拟分析了由于电流过大、喷嘴压缩孔径过小和钨极偏心三种因素所导致的双弧现象。
The phenomenon of double arc which is usually caused by the reasons of too big welding current, too small diameter of the nozzle and eccentric of the cathode has been simulated.
结果表明，在一定的焊接工艺条件下，使用钨极氩弧焊和与母材同质的焊丝，可以对ZA12材料进行有效的焊接。
It is shown that under suitable welding condition, the alloy can be welded well by using TIG arc welding and the welding wire having the same composition as the alloy.
采用模拟时的焊接工艺参数进行钨极氩弧焊平板对接焊，测定焊接热循环曲线和焊缝截面尺寸，对模拟结果加以验证。
The welding thermal cycle and section dimensions of the welding seam were measured in the condition of the simulated welding process parameters for checking simulation results.
试验采用钨极氩弧焊对接焊形式对BT 20钛合金施焊；焊接接头的塑性变形试验在油压机上进行，变形过程中采用了双保温措施。
BT20 titanium alloy is welded with butt welding on GTAW machine... Experiment of plastic deformation is done on press and double heat preservation measure is used during plastic deformation.
并通过一系列焊接工艺试验，确定采用管子内缩管板和高铬镍焊材及自动脉冲钨极氩弧焊方法，提高了管子管板的焊接质量和可靠性。
A series of welding process testing showed that using recessed tube-tube sheet, high Cr-Ni welding materials and automatic TIG welding technology could improve the welding quality of tube-tube...
在氨饱和器焊接中采用钨极氩弧焊与焊条电弧焊相结合的焊接方法，重视焊前清理和焊接线能量控制，既保证焊接质量又提高生产效率。
Applied GTAW and SMAW to weld Ammonia Saturator with emphasis on preweld treatment and controlling welding heat input, high welding quality and efficiency were reached.
并对喷嘴、规范参数、坡口形式等作了相应改进，使双套管、联箱、集气管的焊接全部实现了钨极氩弧焊打底，从而提高了双套管废热锅炉的质量。
They cause all the welding of double tubes, joint boxes and gas-collecting tubes to realize the backing weld of TAW-P. The quality of the double tube waste heat boilers have been improved.
并对喷嘴、规范参数、坡口形式等作了相应改进，使双套管、联箱、集气管的焊接全部实现了钨极氩弧焊打底，从而提高了双套管废热锅炉的质量。
They cause all the welding of double tubes, joint boxes and gas-collecting tubes to realize the backing weld of TAW-P. The quality of the double tube waste heat boilers have been improved.
应用推荐