球形挡头和锥形入口模结构较好。
The structures of ball stopper and taper entry din are better.
推出一种较为理想的铆接模结构。
An ideal riveting die structure which resulting better quality has been developed.
介绍了通风道栅门塑料产品的注射模结构。
Introduced the injection mold structure of the plastic products of the air chute fence gate.
详细介绍了注射模结构和热流道系统的设计。
The design of the mould structure and hot runner system was introduced in detail.
实践证明，该压缩模结构合理，产品质量稳定。
The practice shows that the compression_mould structure is reasonable and part quality is stable.
对透明塑料罩壳注射模结构，采用点浇口进料。
For the injection mold structure of transparent plastic cover shell, point gate feeding is adopted.
分析了一种型芯较长的注射模结构及成型特点。
The structure and shaping characters of injection mold with long core get analyzed.
给出了弱t -余代数的定义，构造了其上的模结构。
The definition of weak T-coalgebra is given and modules over it is constructed.
重点阐述了锥形套注射模结构中脱模机构的设计要点。
Importantly, the design critical points of demoulding mechanism in the structure of cone - thimble injection mold are stated.
通过改进拉伸凸模结构，提高球面轴承座模具加工质量。
Through improving the punch structure, improved the spherical surface bearing housing die machining quality.
模结构，利用该结构的构图方法，和制造液晶显示器的方法。
Mold structure, patterning method using the same, and method of fabricating liquid crystal display device.
最后达到了凹模结构的各个参数的优化设计，得到了预期的结果。
Finally, each optimized design parameter of the concave die structure had achieved, and obtained the anticipated result.
喷油器体因形状所致，其挤压成形无法采用传统的整体凹模结构。
The conventional structure of a entire concave die is not applicable for extrusion of fuel injector bodies because of shape of fuel injector bodies.
随着场模结构参量的增大，熵压缩的演化周期缩短，压缩时间延长；
The influences of the atomic motion and the field mode structure on the atomic entropy squeezing are discussed.
分析了锥面斜孔冲裁的工艺，介绍了一种新型的锥形件冲孔模结构。
Piercing technology for oblique holes on conical surface was analyzed and a new piercing die structure for the conical part was introduced.
介绍了铝箔快餐盒拉伸模结构及压边的设计方案，此模结构较复杂。
The drawing die structure of aluminum foil snack box and marginal pressure design program are introduced, the die structure is complicated.
计算并绘出了非稳区域边界，分析了非稳振荡波形变化规律及其模结构。
The regularity of the change of the unstable oscillation wave form and the structure of the power spectrum were analysed.
本文分析并介绍了制动器底板精整模结构、模具的设计要点和其工作过程。
This paper analyzed and introduced the size die structure, die design points and working process.
分析了笔尖和笔杆的结构特点与成型工艺，介绍了该类零件的注射模结构特点。
Analyzed the structure characteristics of the tip and penholder and molding technology, introduced the injection mold structure characteristics.
对硬质合金拉伸凹模结构及设计要点作了详细介绍，对同类型模具设计提供了参考。
The structure and design points of hard alloy drawing combination concave die were introduced in detail and provided the reference to the similar die design.
介绍了几种连接盘塑件共用一套模架的快换注塑模结构及该模具设计中应注意的问题。
The structure of a rapid-shifting injection mould with a frame Shared by several connection tray work pieces and some remarkable essentials in the design are introduced.
从传统的思维模式无法解释分流模结构的角度出发，去探询型材的挤压成型和模具设计。
Extrusion forming and die designing of profiles are discussed in view of the structure of distribution die which can not be explained by traditional thinking mode.
通过对饮水杯盖产品结构和注射成型的工艺分析，确定了该塑件的注射模结构为一模两腔。
Through study on the structure of children potable water cup and existed technology problems in injection forming, an injection mould with one module and two cavities were determined.
冲裁侧刃是端子模具中的重要工序，其冲裁形状和凸、凹模结构对端子生产质量影响很大。
Punching side blade is an important procedure of terminals die, its punching shape, concave die and convex die structure greatly impact the terminals on manufacture quality.
介绍一种利用压缩空气顶出塑料件的注射模结构。并指出设计、制造过程中应注意的几个问题。
It introduce an injection mold structure to eject the plastics part with compressed air, and points out several problems to pay attention to during the designing and manufacturing.
介绍铝合金挤压型材平面分流组合模结构，系统地分析了平面分流组合模各结构要素及设计要求。
The structures of plane distribution composite die are introduced. The design needs and structure factors of plane distribution composite die are analysed.
介绍了医用一次性塑料镊子的成型工艺及注射模结构，模具试模一次成功，成型塑件满足用户要。
The forming process for the medical one_off plastic tweezers and the structure of the injection mould were introduced.
从语法研究的一个平面来看，语义角色是名词性成分在句模结构中担当的角色，它主要由动词规定。
From the three planes of grammar research semantic role is noun composition the role that undertakes in sentence mould structure, it is stipulated mainly by verb.
分析了矿灯透镜产品结构以及注射成型存在问题，确定了该类塑件的注射模结构以及模具工作过程。
Through analysis on the structure of miner's lamp lens and problems in injection forming, an injection mould structure and its operating process were determined.
并采用一次成形的复合复位模结构，既保证了产品的质量，又提高了生产效率，同时降低了生产成本。
The construction of once-formed compound repositioning die is also adopted to guarantee the quality of the product, raise the production efficiency and decrease the cost of production.
应用推荐