介绍了氮化硅球的加工工艺过程。
The technology procedure of silicon nitride ball is introduced.
氮化硅陶瓷是一种较好的滚动轴承材料。
Silicon nitride ceramic is a kind of fairly good material for rolling bearings.
氮化硅厂拥有国内先进的氮化硅烧结设备。
The azotized silicon factory possesses the domestic advanced azotized silicon sintering equipments.
浸渍强化处理是提高反应烧结氮化硅性能的有效措施。
Infiltration strengthening is an effective means to improve the mechanical properties of Reaction Bonded Silicon Nitride(RBSN).
基础油中磺酸钙的加入使氮化硅的磨损速率得到降低。
The calcium sulfonate additive reduces the wear rate of the materials.
研究了烧结技术对氮化硅陶瓷显微结构和力学性能的影响。
In this paper, the influence of sintering technology on the microstructure and mechanical properties of the silicon nitride ceramic were studied.
第三章为多孔硅表面氮化硅的淀积与转移技术的结果与讨论。
In the third chapter, results and discussions of substrate transfer of thick silicon nitride film were elaborated.
先沉积氮化硅薄膜再氢等离子体处理能得到更好的钝化效果。
Depositing SiNx thin film followed by hydrogen plasma treatment will result in better passivation effect.
烧结助剂是影响氮化硅陶瓷的显微结构和性能的关键因素之一。
Sintering AIDS were one of key factors affecting microstructure and properties of silicon nitride ceramics.
氮化硅蚀刻槽为您提供无与伦比的过程控制、安全性和灵活性。
The Modutek Nb Series silicon nitride bath is engineered to provide unparalleled process control, safety, and flexibility.
氮化硅、二氧化硅双层透明膜可用作硅PIN光电探测器抗反射膜。
Double-layer transparent films, silicon nitride and silicon dioxide can be used as antireflection coating on silicon PIN photodetector.
其做法是在纳米级氧化硅透明衬底上生长氮化硅波导，衬底的折射率远小于波导。
The researchers placed a silicon nitride waveguide on a transparent nanoporous silicon oxide substrate that they specially developed to have a much lower refractive index than that of the waveguide.
用一级轻气炮冲击加载装置，对氮化硅陶瓷进行了冲击性能实验研究。
Shock behavior of silicon nitride ceramic was investigated by using a one-stage light gas gun facility.
结果就是形成一种混合物，可以承受多于没有加入碳单原子层的氮化硅一倍的压力。
The result was a composite that was able to withstand twice as much pressure as unalloyed silicon nitride.
氮化硅可以通过适当掺杂引入杂质能级，用于制造量子阱获得蓝光激光。
Silicon nitride can be used to grow quantum well for obtaining blue laser by dopanting.
玻璃衬底与非晶硅膜之间的非晶氮化硅膜对非晶硅膜的晶化没有明显影响。
The amorphous silicon nitride film between amorphous silicon film and glass substrate is found to have no any effects on the crystallization.
研究了保温时间对气压烧结（GPS）氮化硅陶瓷晶界相及力学性能的影响。
The effect of holding time on intergranular phase and mechanical property of GPS silicon nitride ceramics was studied.
本文分析了几种与氮化硅有关的氧氮化物玻璃的形成范围及其网络结构特征。
Some types of oxynitride glass concerned with silicon nitride are studied in the present paper.
综述了钢铁表面形成氮化硅薄膜的基本过程，各种制备方法、特点及影响因素。
The principal mechanism of formation of silicon nitride layer on iron surface is described, and variety of production processes and influence factors are reviewed.
氮化硅粉料表面基团的种类和数量随制备工艺和生产厂家的不同有明显的差异。
On the particle surface, and that species and amount of theses surface groups varied with production methods and manufacturers.
氮化硅陶瓷是一种新型刀具材料，其优良的切削性能解决了超硬材料的加工难题。
As a new type tool material, the excellent capabilities of silicon nitride ceramics cutting tools ravel out many cutting problems of super hard materials.
分析了颗粒复合对氮化硅基陶瓷复合材料的火花放电加工性及切削性能所起的作用。
The effect of particles on the electrical discharge machining (EDM) and cutting property of silicon nitride-based composites was analyzed.
大量的实验研究表明，PECVD氮化硅薄膜的组成、结构及其性能与沉积参数密切相关。
Lots of experiments indicate that the form, structure and properties of silicon nitride thin film prepared by PECVD are related to deposition parameters.
本实验通过系统地改变沉积参数，在经过清洗好的单晶硅片上沉积了一系列的氮化硅薄膜。
In experiment, a series of silicon nitride thin films are prepared on cleaned silicon wafer by varying deposition parameters.
结果表明，这两种有机物及其多种复配配方可以大幅提高氮化硅陶瓷磨削时的材料去除率。
The results show that two kinds of organic substance and the compounds which include both of them can enhance efficiency of the engineering ceramic grinding greatly.
以环氧改性有机硅树脂为基体，氮化硅、氧化铝混合填料为导热粒子制备了导热绝缘涂料。
The thermal conductive coating was obtained with the epoxy modified silicone resin as matrix, and the mixture of silicone nitride and alumina as the heat conductive fillers.
用高能量密度脉冲等离子体于室温下在氮化硅陶瓷刀具上成功沉积了高硬耐磨的氮化钛涂层。
Hard and wear-resistant titanium nitride coatings were deposited by pulsed high energy density plasma technique on silicon nitride ceramic cutting tools at ambient temperature.
研究添加成孔剂法制备的有球形宏观孔的多孔氮化硅陶瓷在不同孔隙率和孔径下的介电性能。
The porosity, pore diameter and solubility of ceramsite filter made by these two methods were analyzed and compared.
研究添加成孔剂法制备的有球形宏观孔的多孔氮化硅陶瓷在不同孔隙率和孔径下的介电性能。
The porosity, pore diameter and solubility of ceramsite filter made by these two methods were analyzed and compared.
应用推荐