原子力显微镜(AFM)的微探针系统是典型的微机械构件,它在接触扫描过程处于耦合变形状态。
Micro cantilever probe of atomic force microscope (AFM) is a typical micro mechanical component, which is under a coupling deformation during the contact scanning process.
代表输出中时间连续增量的各接触点,可以被看成是反转和未反转信号的扫描。
The contacts representing successive increment of time in the outputs can be looked upon as the sweeping of the reversed and unreversed signals.
它可以快速地扫描所有的接触您的设备上,而且他们的组类型的信息丢失。
It can quickly scan all the contacts on your device, and group them by the type of information missing.
用扫描电镜、透射电镜、X射线衍射、接触角测量等技术对表面进行了表征。
The resultant surfaces were characterized by means of SEM, transmission electron microscopy (TEM), X-ray diffraction (XRD), and water contact Angle measurements.
这些结果将十分有益于大气环境下的软X射线接触显微术及软X射线扫描透射显微术的研究。
These should be very useful to the soft X ray contact microscopy in air and the soft X ray scanning transmission microscopy.
由接触复制或由激光直接扫描而得的半色调点子。参阅软点。
Hard dots Half-tone sots produced either by contact or by direct laser scanning. See Soft dots.
用扫描电子显微镜和视频变焦显微镜观察了改性烟用聚丙烯纤维的形态结构,用纤维表面动态张力仪测定了其对水的接触角。
The morphological structure was observed by scanning electron microscope and video-zoom microscope, and the contact angle to water was determined by dynamic tension meter.
在MRI扫描中,这些微量金属可以导电,并造成皮贴接触部位的烧伤。
That little bit of metal can conduct electricity and cause a skin burn at the patch site during an MRI scan.
将标本固定于云母上,在接触及轻敲模式下扫描成像,操作在常温常压下进行。
Mg sample preparation for AFM was fixed on mica and AFM images of scanning observation were captured by contacting and tapping modes and operated under normal atmospheric pressure and temperature.
利用激光狭缝扫描原理和光电传感技术,提出了一种用于测量大型回转体类零件圆度误差的激光扫描非接触测量方法和测量系统。
A laser scanning non contact measuring method and a measuring system for the roundness errors of large sized rotating parts are presented.
介绍了一维表面温度分布的非接触测量仪器——扫描光电高温计的基本原理、结构、性能以及实用情况。
This paper introduced basic principle, structure, property and practical circumstance of the scan photoelectric pyrometer for measuring one dimensional surface temperature distribution.
基于激光扫描检测技术,现采用激光球面反射扫描原理,提出了一种曲臂两臂轴径的激光非接触检测方法和测量系统。
Based on laser-scanning measuring technology, a laser non-contact measuring method of arm diameter for crankshaft and a measuring system by using the laser scanning principle are presented.
针对复杂型面刀具的设计要求和结构特点,研究开发了一种基于点采集的高精度非接触式激光扫描测量系统。
Aiming at the design demand and structure character of complex surface tools, a high precision non-touching laser scanning system based on point sampling was studied and developed.
用红外光谱(FTIR)、X射线光电子能谱(XPS)、热重分析(TGA)、扫描电镜(SEM)、离子色谱和动态接触角对接枝聚合物进行了表征。
The graft copolymers were examined by using FTIR, XPS, TGA, SEM, ion chromatography and dynamic contact angle test.
Atos流动式光学扫描仪基于光栅原理,是逆向工程领域中一种先进的非接触式光学扫描设备。
ATOS flowing optical scanner with the fringe pattern theory is a kind of advanced and non-contacted of equipment in reverse engineering.
在深入研究上述方法的基础上,提出了一种自由曲面的非接触自动测量方法,介绍了测量系统的构成、曲面边缘的提取、自动扫描方式的规划以及测头跟踪方式等设计要点。
On the basis of a thoroughgoing study of the above methods, a non contact method for measuring free form surface automatically is given, and some key techniques are also described.
本文应用扫描、透射和免疫电镜方法较全面地观察、比较和验证了大鼠第三脑室内的接触脑脊液神经元。
Scanning, transmission and immuno-electron microscopic methods have been combined to overall observe, compare and identify the CSF-contacting neurons in the ral third cerebral ventricle.
在深入研究上述方法的基础上,提出了一种自由曲面的非接触自动测量方法,介绍了测量系统的构成、曲面边缘的提取、自动扫描方式的规划以及测头跟踪方式等设计要点。
On the basis of a thoroughgoing study of the above methods, a non contact method for measuring free form surface automatically is given, some key techniques are also described.
激光三维扫描技术能够快速,精确,无接触地完成复杂物体表面的重构。
The technology of three-dimensional laser-scanning gives a quick, precise, and untouched solution to reconstruct the surface of complex objects.
通过扫描电镜(SEM)可以发现镍电极能牢固地附着在陶瓷体上并具有良好的欧姆接触性能。
Seeing through SEM, the base metal of Nickel paste can be accreted hard on the ceramics, and good ohm attachment is formed.
用接触角测定仪和扫描电子显微镜测定了接枝膜表面的性能和形态。
The surface property and morphology of the grafting membrane were measured by a contact ang...
该软件可控制的线性扫描非接触式激光成像仪用于面部地形购置和铣床的格局捏造。
The software controls a linear scan noncontact laser imager for facial topography acquisition and a milling machine for pattern fabrication.
用接触角测定仪和扫描电子显微镜测定了接枝膜表面的性能和形态。
The surface property and morphology of the grafting membrane were measured by a contact angle measuring instrument and a …
提出了一种并联式伸缩机构作为传感器执行机构、定长测量臂的磁性滚轮扫描测量轮辋尺寸的接触式检测方案。
A parallel mechanism based on contact measurement scheme with the measuring probe composed of a small magnetic wheel and single length link is put forward.
介绍飞机表面划痕非接触测量的激光三角扫描法。
In this paper a laser triangulation scanning method for the non-contact measurement of scratches on aircraft skins and aircraft window surfaces is described.
改性硫酸钙晶须产品采用活化指数、接触角、扫描电子显微镜、X射线衍射和红外光谱分析进行表征。
Modified calcium sulphate whiskers are characterized with active exponent, contact Angle, SEM, X-ray diffraction and IR respectively.
B660的前视红外红外摄像机采用先进的,高度敏感探测器的非接触式扫描的广泛领域。
The FLIR B660 infrared camera uses an advanced, highly-sensitive detector for non-contact scanning across wide areas.
基于激光三维扫描仪的军械装备器材非接触式三维信息采集系统,由PC机、激光扫描仪及旋转台装置组成。
The ordnance non-contacting 3d data auto-collecting system based on laser 3d scanner is composed of PC, laser scanner and rotating platform device.
用接触角测量仪和扫描电镜观察聚氨酯膜改性前后的表面润湿性和表面形貌的变化;
Wettability and surface topography of modified PU films were measured by contact angle meter and SEM.
用接触角测量仪和扫描电镜观察聚氨酯膜改性前后的表面润湿性和表面形貌的变化;
Wettability and surface topography of modified PU films were measured by contact angle meter and SEM.
应用推荐