这些成本预测方法是通过分析或者模拟的形式，从Palladio模型(PCM的实例)中计算出标准结果(例如反应时间)。
The approaches, by means of analyse or simulation, calculate metrics (e.g. response time) from Palladio models (instance of the PCM).
通过直接观察和分析23个全球气候变化模式的计算机模型的数据，研究人员作出预测，气候变化将对这些地区的谷物种植造成十分可怕的影响。
The effect on crop-growing in those regions would be dire , according to the projections based on direct observations and data culled from 23 computer models on the planet's evolving climate patterns.
通过直接观察和分析23个全球气候变化模式的计算机模型的数据，研究人员作出预测，气候变化将对这些地区的谷物种植造成十分可怕的影响。
The effect on crop-growing in those regions would be dire, according to the projections based on direct observations and data culled from 23 computer models on the planet's evolving climate patterns.
以汽轮机功率方程和锅炉吸热量方程为基础，并将机组的整个回热系统视为一闭口热力系统，通过对其的热平衡分析，得到了高加切除对机组热经济性影响的计算模型。
By heat balance analysis of the whole regenerative system, which is regarded as a closed thermodynamic system, the calculation model on the influence of HPs removal on heat economy of unit is derived.
本文建立了喷流式换热器的火用效率计算模型，并通过实例计算，分析了各运行参数对喷流式换热器火用效率的影响。
The paper founded the efficiency computing model of jet heat exchanger and analyzed the effect of operating parameters on efficiency of jet heat exchanger by the calculation of examples.
运用这些模型，承包商可根据工程项目各种不同竞争对手的情况，通过分析计算，确定自己的报价策略，以争取战胜对手而夺标。
Using these models, the contractors could confirm their own bidding strategy by analyzing competitor's instance and calculation in order to strive for overcoming the opponents and holding the belt.
并且应用轴系不平衡响应程序进行定量的计算和通过模型转子试验验证了以上分析的正确性。
And the correctness of the above analysis has been proved by the quantitative calculation with the unbalanced response program of shafting and tests on a model rotor.
通过改造绕组调制函数所建立的数学模型分析计算绕组的分层系数、正交误差和电气误差。
Through reform the modulating function of the winding to set up the mathematic model, by which it analyses and calculate the layer coefficient, quadrature error, electrical error.
通过对火灾时烟气发生量及烟气流场的分析，建立了舞台空气幕计算的数学模型并求数值解。
Based on an analysis of the predicted volume and flow field of the smoke generated in case of fire, sets up a mathematical model and works out its numerical solution.
且以黑龙洞泉为例，通过计算、拟合、分析，说明建立的泉流量模型具有较好拟合性和稳定性。
It is shown that the spring flow model founded is preferably fitting and stability for the case of the Black Dragon Cavity by calculating, fitting and analyzing.
通过计算机数值模拟，得到了单速车道和多速混合车道元胞自动机交通流模型的基本图，并对这两种模型的交通流特性进行了分析和讨论。
Via computer numerical simulation, the fundamental diagrams of the single-speed lane and multi-speed lane CA traffic flow models are got, and these two models' traffic flow characters are presented.
本文采用个体跨期最优模型，通过计算劳动力供给跨期弹性，分析新法对劳动力供给的影响。
This study adopts an individual intertemporal optimal model to analyze the effects of the new Labor Contract Law on labor supply by calculating intertemporal elasticity of labor supply.
通过建立斜拉桥优化模型，运用结构分析方法，结合优化算法计算实例，对大跨度斜拉桥的动力优化设计进行了初步的探讨和研究。
Through building optimum model of truss Bridges, utilizing structural analysis methods and combining examples of optimum algorithms, the dynamic design of wide span truss Bridges is discussed.
通过建立数学模型，进行水量水质计算，分析了宝应县污水处理厂尾水排放对水环境的影响。
By establishment of a mathematical model for water quality and quantity calculation, the impacts of tail water from the effluent plant of Baoying County on water environment are analyzed.
通过实例进行的电力设备LCC计算分析，真实地反映了工程中现金流水平，证实了模型的正确性和工程实用性。
Results of case studies show that the proposed LCC model can be used to optimize the project schemes and improve the investment efficiency, and it is correct and practical.
本文通过对负荷模型在各种电网计算中所起作用的分析，强调了建立较为精确的负荷模型的必要性。
Based upon the analysis of effects of modelling on divers network computation, this paper emphasizes the necessity of establishing advanced load models.
并且通过对模型的分析，采用MATLAB编程计算球面距离。
By analyzing the model, we calculate the spherical distance in MATLAB programming method.
通过求解压缩机热力学模型和进行动力计算，分析了背压孔的一般运动规律。
General motion low of back-pressure ports position is developed by solving thermodynamic model of compressor and carrying out dynamical computation.
通过有限元模型和实际结构的曲率模态计算得到结构损伤因子，通过分析该损伤因子，可以判断实际结构的损伤位置。
Through comparing the curvature modes of real structure with finite element model, a damage factor was gained. Based on analyzing the damage factor, damage location can be identified.
通过对试验数据的计算分析，对数学模型的正确性进行了论证。
The validity of the mathematical model is demonstrated with computing and analysing the test data.
本文通过分析计算和试验相结合，探讨了圆板模型具有单孔输入热量和多孔输入热量时温度响应的简化计算方法。
This paper deals with the simplified calculating method of the temperature response of the round plate model through the combination of analysis and experiments.
采用三维有限元数值分析法，通过建立三维有限元计算模型，分析堵塞长度对堵塞区有效应力场的影响。
Three dimensional finite element computing model is established and the effect of stemming length to deep hole bench blasting is studied by three dimensional finite element method.
通过实例分析了软化及不同强度模型对计算结果的影响。
Through instances, the influences of softening and different strength models on the results were analyzed.
在两种负载模型下，通过计算分析了滤波电感和电容对电源电压波动的影响；
The voltage ripple waveform is analyzed based on the inductance and the capacitive change under two load models.
利用杆件结构有限元动力分析计算，并通过模型梁试验，建立起简支梁在附加荷载作用下振动特性与破损模态之间的关系。
Through beam structure finite unit dynamic analysis and experiment of RC model beam, we build the relationship between beam bridge attached load vibration characteristics and damaged model.
对压载水的散热过程进行了分析，通过合理的简化建立了压载水散热计算模型。
The heat dissipation of the ballast water has been analyzed by the calculating model of the heat dissipation based on rational simplication.
通过这个模型与传统计算系统模型的比较，分析了它们的相似点和不同点，这对于网格的研究是很重要的。
By comparing this model with the traditional computing system model, analyze their similarities and differences, which is important for grid study.
通过这个模型与传统计算系统模型的比较，分析了它们的相似点和不同点，这对于网格的研究是很重要的。
By comparing this model with the traditional computing system model, analyze their similarities and differences, which is important for grid study.
应用推荐