The result shows that the whole car dynamics model can reflect the real vehicle condition.
结果表明建立的整车动力学模型能反映真实情况。
Then obtaining the whole car dynamics parameters based on mass center coordinates formula of space force system and torque translation theorem.
再根据空间力系质心坐标公式和力矩平移定理求得整车的动力学参数。
Crossovers blend the looks of an SUV with the handling dynamics of a car, thanks to their unit-body construction.
交叉融合与汽车的操控动力的SUV车的外观,其单位班子建设表示感谢。
BMW new Vision Efficient Dynamics concept car is unveiled for the first time.
宝马的新型高效动力概概念车首度公开亮相。
On the platform of the ADAMS/CAR secondary development module, the MB dynamics simulation model of the virtual prototype of a domestic light bus has been created.
以ADAMS/CAR二次开发模块为平台,建立了国产某小型客车虚拟样机的多体系统动力学仿真模型。
This article makes an analysis on the car speed by integrating the car accidents with the theory of dynamics, which may be applied in the handling of traffic accidents.
结合机动车辆碰撞事故分析,运用一维碰撞动力学理论,进行了运动速度分析,可望在事故处理中得到应用。
On the basis of computational fluid dynamics (CFD), adopting limited volume method, the external flow field of a car body is simulated.
以计算流体力学(CFD)为基础,采用有限容积法模拟计算了轿车车身的外部流场。
The possible benefits of the technique of computational fluid dynamics (CFD) used in car body flow-field analysis is highlighted.
探求了应用计算流体力学(CFD)研究汽车车身外部流场的可行性。
According to the fundamental principle of vehicle dynamics, this paper established a full car model of Active Suspension System (ASS) and Electric Power Steering System (EPS).
本文根据车辆动力学基本原理,建立了主动悬架与电动助力转向系统的整车模型。
Firstly, according to the vehicle dynamics and the safety restriction, the paper deduced the safety operation speed under the state of car-following and lane-changing.
首先根据车辆动力学原理和安全约束条件,推导了跟车安全速度模型、换车道安全速度模型。
The dynamics model of the special molten iron tank car was established by using multi-body dynamics software package SIMPACK, and the curving performance was analyzed.
利用SIMPACK动力学仿真软件建立了特种铁水罐车的动力学模型,对其曲线通过性能进行了分析计算。
The non linear moving stability of cars on resilient track is researched with the car track coupling dynamics theory.
运用车辆-轨道耦合动力学理论,研究了车辆在弹性轨道上的非线性运动稳定性问题。
Recommended by the WPC to the dynamics of the bogie to assess performance in order to check their car on the curve of capacity, I will help complete the task.
建议由WPC重新对转向架的动力学性能进行评估,以校验其转向架对曲线的通过能力,我公司将协助完成该项工作。
The flow field around a car is simulated with the method of computational fluid dynamics (CFD) in this paper. Some aerodynamic parameters are obtained.
应用计算流体力学(CFD)方法计算模拟轿车三维外流场,得出模拟计算结果。
In reference to some air dynamics of energy saving paper competitive car body aerodynamics numerical simulation and puts forward eventually optimization scheme.
在参考一些空气动力学文献后,对节能竞技赛车车身的空气动力学性能进行数值仿真并提出最终优化方案。
Adopting three methods to get the dynamics parameters of a car.
采用三种方法对汽车动力学参数进行提取。
Structural dynamics modification of car front-body subsystem is crucial to the laboratory road simulation test in which it is used for testing instead of car body.
对轿车车头子系统进行正确的结构动力修改是利用其代替整车进行室内道路模拟试验的关键。
In order to adapt to new modern car styling, the aerodynamic numerical simulations based on computational fluid dynamics (CFD) are applied to the process of car styling.
结合作者进行的汽车造型概念设计,介绍了应用虚拟风洞进行汽车空气动力学数值模拟的研究过程。
Then vertical contact dynamics of tire is analyzed with contact patch considered, and that of the system composed of wheel, suspension and car body are analyzed by using modal synthesis method.
然后计算了考虑接地印迹长度的垂直接地动特性,并采用模态综合方法分析了车轮、悬架与车身组合系统的特性。
Our team used Ford Focus which is a very good-looking European style. And they displayed driving dynamics in the campaign. I like this car personally.
我们的车队用的都是福特·福克斯,这款车是非常漂亮的欧洲车型,在比赛中也表现的非常出色,我很喜欢这款车。
The semi-active suspension keeps well control effect when the dynamics testing car negotiating curves.
在曲线上运行时,半主动悬挂模式对车体横向振动仍有良好的控制作用;
Due to the restriction by the software solution scale, usually only a half-car model can be established in the dynamics simulation model establishment.
D45型落下孔车轴数多,结构庞大,机构复杂,动力学仿真建模受软件解题规模的限制,常常只能建立半车模型。
Due to the restriction by the software solution scale, usually only a half-car model can be established in the dynamics simulation model establishment.
D45型落下孔车轴数多,结构庞大,机构复杂,动力学仿真建模受软件解题规模的限制,常常只能建立半车模型。
应用推荐