可控性是指测试系统控制被测实现(IUT)按照一定顺序接收输入的能力。
Controllability is the capability of the test system to force the Implementation Under test (IUT) to receive inputs in a given order.
该电路通过对被测电压的判断和量程选择器的控制,实现了在高精度仪表中量程的自动选择。
The circuit, through evaluating the input voltage and controlling the selector of the measuring scale, realizes automatic selection in high precision instrument.
频率测量一般是通过对被测信号和标准信号计数实现,因此量化误差是引起测量误差的主要原因。
Frequency measurement is usually implement by accounting the measured signals and standard signals, thus quantizing error becomes the main source of measuring error.
这种电路具有等电位隔离特性,能消除电网络中其它电阻对被测电阻的影响,可实现网络电阻的直接测量。
The effect of the other resistors in an electric network on the measured resistors can be removed and it is possible to measure network resistors directly by this circuit.
根据这一比值可以实现探头与被测表面间距离的估计。
By using this ratio mean distance between probe and target surface was estimated.
根据这一比值可以实现探头与被测表面间距离的估计。
By using this ratio, mean distance between probe and target surface was estimated.
测试应用时总线广播测试数据到各个被测芯核,从而实现多核的并行测试。
During test application test data is broadcasted to every core under test by bus, thereby implementing concurrent test of multiple cores.
成像系统标定是机器视觉测量系统所成图像和实际被测尺寸之间实现高精度转换的关键过程。
The calibration of a camera system is a key step to the precise conversion between an image of machine vision and the real dimension.
微波开关矩阵主要是实现自动测试系统与被测电路单元之间的信息交换,以及为被测单元提供必要的负载。
The microwave switching matrix is to exchange messages between ATS and the circuit units under test, and to provide necessary load for these units.
针对弹道散布范围大或被测飞行物体尺寸大的测速场合,介绍了一种实现大面积有效靶区激光光幕速度测量的方法。
A novel Laser screen velocity measuring method with large effective screen area is introduced for some special velocity measuring occasions like wide spreading range or big-size flying objects.
首先利用圆柱度仪和角尺对被测件进行测量,同时采集原始测量数据,然后利用最小二乘法实现平面度误差的评定。
While the plane is measured by using the cylindricity measuring instrument and square, the data acquisition should be done at the same time.
计算机模拟和实验结果均证明,此方法能有效地去除相位图中的噪声,实现带噪声的主值相位图的相位展开,可靠地重建被测物体的表面形貌。
Computer simulation and experimental results make it clear that this method can effectively remove noise in phase map, unwrap the wrapped phase, and reconstruct the surface of the detected object.
锁相放大技术对被测信号进行窄带放大,锁相放大器结合示波器输出了被测信号的周期变化部分,实现了光热法测量中微弱信号的测量。
By narrowing the bandwidth of the signal and amplifying it by a lock-in amplifier, the fluctuating components of the signal can be shown on an oscillograph with lock-in amplifier.
仪器实现三个功能,即荧光寿命、时间分辨光谱和被测溶液浓度的测量。
Finally, three functions are realized, they are the measurements of fluorescence lifetime, time-resolved spectrum and concentration of the detected solutions.
提出一种剪切干涉测量中实现由相位差分准确高效恢复被测波前相位的算法。
A phase recovery algorithm with improved accuracy and efficiency is proposed for test wavefront phase recovery from obtained phase differences in shearing interferometry.
本文基于光学三角法测量原理,设计了一种通过改变光平面与成像光轴夹角来实现对视场内被测零件表面扫描的视觉测头。
A novel noncontact scanner that scans the inspected part's surfaces by changing the Angle between laser plane and optical axis is designed based on optical triangulation.
这种方法无须接触式测头,仪器小巧,测量仪器与被测件间无测量力,因而易于实现现场无损检测。
The non contact probe can avoid contact measuring force, so it can be used for on site inspection.
分析和确定了电动助力车主要性能的检测项目,并对车速、续行里程、载荷、蓄电池的放电电压和放电电流等被测项目的检测原理及实现方法进行了探讨。
The testing principle and the performing method of testing items such as speed, range, load, discharge voltage and current for electro-hybrid bicycle are described based on deciding the items.
而对被测信号进行调制使其与参考信号相关是实现锁相检测的关键。
The key point to realize the technique is to modulate the detected signal and make it related to the reference signal.
通过多个测试成分向被测系统发送数据和接收被测系统的响应来实现对被测系统的测试。
The testing is implemented by these components stimulating system under test and observing the response from system under test.
无源毫米波成像技术是通过探测被测场景及目标在毫米波段的自然辐射实现成像的。
Passive millimeter-wave (PMMW) imaging technology forms images by detecting natural occurring millimeter-wave radiation from the scene and targets.
测试结果表明,该姿态测量系统可以实现对被测对象高精度、实时的测量,且具有合作目标简单,价格低廉等优点。
The test results show that the attitude measurement system can obtain the ideal high accuracy and real-time measurement, and has some advantages such as simple cooperative target and cheap et al.
设计了测试代码的实现算法,通过测试代码可以自动完成向被测代码插桩。
The relevant algorithm of the test code, with which the piling technology would be automatically performed, was designed.
根据被测组分在色谱柱上的保留性质将其分为两类,以实现基线分离。
The target solvents were divided into two groups for baseline separation according to their column-retention specificity.
本文应用双视场电子散斑干涉技术,实现了对被测对象表面的全场变形和局部微观场变形的同时实时检测。
The double-field-of-view ESPI system has been presented in this paper and employed to measure the macro-scale and micro-scale deformations of the tested object simultaneously.
在协议互操作性测试过程中,如果能够实现控制和观察被测系统中的一个IUT,将会更有助于对互操作测试的研究。
The implementation of controlling and observation in one of the IUTs of interoperability testing system will be useful for the research of the interoperability testing.
本文应用双视场电子散斑干涉技术,实现了对被测对象表面的全场变形和局部微观场变形的同时实时检测。
Techniques of dual receiving area detection and correlation detection were applied and realized in the improved circuit to alleviate or eliminate the interference.
整个测试过程全部由计算机控制,避免了人工干预,从而实现了对被测件的自动测试。
Without manual intervention, all the process were controlled by the computer and this realized automatic testing.
根据这一比值可以实现探头与被测表面间距离的估计。
The distance between the head of a recording device and the surface of the recording medium.
根据这一比值可以实现探头与被测表面间距离的估计。
The distance between the head of a recording device and the surface of the recording medium.
应用推荐