利用动压和速度制动来控制轨迹飞行器的能量。
Use the dynamic pressure and velocity to control the energy of the vehicle.
在阐述用直纹面拟合扭曲型面的基础上，用刚体变换的方法推算出阴极的控制轨迹。
Based on the description of fitting warped blade surface with ruled surface, the locus of cathode is induced by rigid body transfer in this paper.
每完成一个批次就利用新得到的数据对模型进行更新，该更新的模型也是在前一批次的控制轨迹基础上进行线性化得到的。
Thus, the perturbation model is updated in a batch-wise manner. After completion of each batch, a batch-wise perturbation model is identified linearized around the control trajectory for that batch.
然而，通过自由落体测试，研究者可以量化的测量翅果的飞行动力并且用得到的信息数据来控制翅果的自旋和飞行轨迹。
However, through free-fall testing, the researchers could quantitatively measure the samara's flight dynamics and use this information to control the samara's autorotation and flight path.
车辆的设计使其能够探测车道，人行道以及其它交通工具；评估坡道，同时计划轨迹，启动以及控制。
The vehicles are designed to detect lanes, pedestrians, and other vehicles; estimate slope terrain; as well as plan trajectory, actuation, and control.
据悉，每枚烟花火星的轨迹，何时腾空，何时升至制高点，何时燃尽，均将由电脑控制。
The track of every single firework, including the accurate time to lift, reach the highest point and burn out, will be controlled by computers.
游戏机能测出手柄的移动轨迹，识别手柄指着屏幕上的什么东西，然后根据得到的信息控制屏幕上的游戏。
The console can determine how the controller is moving in space and what it is pointing at, and USES that information to control what is happening on screen.
这款轨迹板和一般的笔记本电脑轨迹板类似，你只要在上面滑动手指就能控制鼠标在屏幕上的移动。
The trackpad works like an ordinary laptop trackpad, where you slide your fingers to control the cursor on the screen.
在第五章和第六章中，对双臂空间机器人系统在惯性坐标系内进行轨迹跟踪控制问题进行研究。
In the fifth and sixth chapter, trajectory tracking control in inertia space of the dual-arm space robot system is studied.
对一种利用高空风的风速差控制飞行轨迹的新型低能耗临近空间飞行器，进行了力学分析与配平计算。
The mechanical analysis and the trimming were performed for a novel near space aircraft which uses the variation in wind speed at high altitude to control its flight path.
采用直接力控制可弥补常规飞机在轨迹操纵方面的不足，并产生某些新的运动模式。
The disadvantages of normal aircraft to realize flight path control can be overcome by using direct force control, and some new motion modes can be created.
现在从天上再回到地面上，你可知道圆周率控制着弯曲河流的轨迹？ 不管是亚马逊河还是泰晤士河，都被π管得服服帖帖。
Back on Earth, pi controls the path of winding rivers from the Amazon to the Thames.
文章给出了横向预瞄偏差的概念，提出了一种基于横向预瞄偏差的驾驶员前视轨迹控制模型。
In this paper, the concept of preview course lateral deviation was given and a corresponding driver control model was set up.
设计了一基于模型的计算力矩控制算法，并深入探讨了其应用于三种不同轨迹规划方法下的控制性能。
A model based control scheme employing computed-torque control has been presented, and its applications in three different path planning methods have also been discussed.
然后利用LQ最优控制技术，构造了车辆沿着基准轨迹进行行驶路线变更的反馈控制器。
Then based on the LQ optimal control technique, the feedback controllers for lane change along the planned path were constructed.
为进一步改善控制品质，提出了区间轨迹方法，通过调整轨迹参数可以在响应速度与模型准确性之间进行选择与平衡。
To further improve control performance, zone trajectory method was proposed and a parameter was provided to trade off the response performance and model accuracy.
在对AGV的定位轨迹控制方法上，选定了位姿开环控制与闭环控制相结合的方式。
Opened and closed loop control was chosen to control method of the motion track of AGV to its position and orientation.
在具有控制和轨迹约束的再入制导中，提出了一种新的基于多模型预测再入飞行器纵向制导方法。
A new method based on multi-model prediction is proposed for the longitudinal guidance of re-entry vehicles with trajectory and control constraints.
对扩充数控系统的轨迹控制功能，简化零件程序，提高加工精度具有重要的意义。
The proposed algorithm can extend the CNC's trajectory control function, simplify the part program, and improve machining precision.
本文针对斗轮式挖泥船的特点，实现了斗轮式挖泥船挖掘轨迹控制及其挖泥作业的综合监控。
With the characteristic of wheel dredger, this paper realizes the way of controlling on the track of dredging wheel and its comprehensive monitored-controlling.
重点介绍了该井定向侧钻及井眼轨迹控制的设计与施工情况。
This paper mainly discussed the designation and operation of directional sidetracking and well track control.
重点介绍了其井眼轨迹控制技术。
在定向井轨迹控制中，方位控制是个棘手问题。
The control of azimuth is a knotty problem in controlling directional well trace.
介绍一种运用单片微机进行磁通轨迹控制的电压型GTO逆变器变频调速系统。
The authors introduce a voltage-source GTO inverter VVVF system with flux linkage locus controlled by single-ship microcomputer.
借助机械系统动力学仿真分析软件ADAMS，探讨了在计算力矩、模糊变结构控制策略和所遴选的轨迹规划方法下，机械手的控制效果。
By using the simulation software ADAMS, the performance of manipulator which employing the designed control algorithms and the selected path planning method has been discussed.
首先对单调NC轨迹曲线进行绘制，进一步用不求极值点坐标而实现自动控制变向的方法，求出NC加工轨迹；
To do this, the monotone curve is firstly drawn, and then without finding the coordinate of the inflexion point, the NC machining path can be obtained by the method of automatic direction control.
运动控制是自动控制的重要分支，由于它能够实现对运动轨迹与运行速度的精确控制，因此运动控制系统在各类控制工程中有着广泛的应用前景。
Motion control is an important branch of automatic control, and it has got extensive application because of its precise control for motion track and moving velocity.
运动控制是自动控制的重要分支，由于它能够实现对运动轨迹与运行速度的精确控制，因此运动控制系统在各类控制工程中有着广泛的应用前景。
Motion control is an important branch of automatic control, and it has got extensive application because of its precise control for motion track and moving velocity.
应用推荐