本文用等效线弹簧模型计算裂纹转轴的动力稳定性问题。
In this paper, the equivalent line-spring model is employed to study the dynamic stability of a rotating cracked shaft.
针对存在的超弹性现象,提出了改进的质点—弹簧模型。
Aiming at the super-elastic phenomenon, the authors proposed an improved mass-spring model based on the classic mass-spring model.
介绍质量-弹簧模型的准静态模拟和直接计算两种快速算法。
This paper presents two fast algorithms of mass-spring model: quasi-static simulation and direct computation method.
介绍质量-弹簧模型的准静态模拟和直接计算两种快速算法。
Research and improvement of OBB collision-detection based on mass-spring model;
基于动能密度和弯曲弹簧模型,提出了裂纹梁损伤识别两步法。
A two-step damage identification method of cracked beams is proposed based on the kinetic energy density and the bending spring model.
利用等效线弹簧模型近似计算了含裂纹转动轴的自由振动基频。
In this paper a model of the equivalent linear spring is proposed for approximately calculating fundamental frequencies of a vibrating shaft with an arbitrary crack.
基于质点-弹簧模型的曲面准对称化展开算法展开三角化曲面;
Surfaces are flattened with quasi-symmetrically distributed triangle strips based on a mass-spring model.
分析的具体行为的影响骨料级配,颗粒-弹簧模型离散元方法。
For analyzing the influence of aggregate gradation on the concrete behavior, the grain-spring model of discrete element method is presented.
采用线弹簧模型求解多个共面任意分布表面裂纹的应力强度因子。
The stress intensity factors of multitudinous arbitrarily distributed coplanar surface cracks are solved by using the line - spring model.
应用梁非线性弹簧模型对穿越黄河隧道一次衬砌结构的受力进行了分析。
The lining structure of the Yellow River crossing tunnel is analyzed, the results of the beam and non linear spring model are compared with those of other models.
三角化曲面上的网格顶点和网格边被抽象为质点-弹簧模型,用来控制网格形状。
Vertices and edges on the triangulated surface are abstracted into a mass-spring model which is used to control the shape of triangles.
提出了一种含裂纹的杆单元,基于断裂力学的线弹簧模型,导出了相应的动刚度矩阵。
This paper presents a method for analyzing the plastic properties of a grouted rock bolt element.
为了考虑中间压电层与上、下功能梯度层之间的粘结效果,采用线性弹簧模型以模拟界面性能。
To consider the effect of bonding characteristics of the adhesives between the piezoelectric layer and the functionally graded ones, a linear spring layer model is adopted.
结合弹簧模型、变密度法和拓扑优化工具,研究了实现平面可控轨迹输出柔顺机构的设计方法。
This paper described the use of spring model, penalized density method and topology optimization as a synthesis tool for the design of controllable path-generating compliant mechanisms.
为了考虑中间压电层与上、下功能梯度层之间的粘结效果,采用线性弹簧模型以模拟界面性能。
State space formulations are developed to study a simply supported hybrid beam consisting of two functionally graded material layers and an intermediate actuating or sensing piezoelectric layer.
本文提出的用模拟桩周土约束的剪切弹簧模型来计算单桩刚度,并推导出了相应的理论计算公式。
In the paper, a shear spring model is proposed to simulate the constraint of the soil. Based on this model, the theoretic formula of pile head stiffness is derived.
通过人工弹簧模型和虚拟载荷法描述柔性机构设计的目标函数,采用伴随敏度分析法进行了敏度分析。
The objective function was described by artificial spring model and dummy load method and the sensitivity was analyzed by the adjoint sensitivity analysis method.
随之,建立串联弹簧模型理论用于初步确定隔震垫参数,再使用非线性动力时程分析法进行详细设计。
Then the model of series spring is used to estimate the isolator parameters and the method of nonlinear dynamic history analysis is used for detail design.
考虑到气囊模型的特性与弹簧模型的特性相似,利用有限元法把复杂的气囊模型简化为常用的弹簧模型。
Considering that the property of the gasbag model is similar to that of the spring model, the complex gasbag model is simplified to a general spring model in the light of the Finite Element Method.
本文引入了几何非线性关系和等效线弹簧模型对含裂纹的弹性轴弹性盘转子系统进行非线性动力学分析。
Non-linear dynamics characters of a rotor system for an elastic shaft-disk with a crack are examined by introducing the geometric non-linearity and equivalent line-spring model.
分别对惯用法、修正惯用法、多铰环法和梁—弹簧模型法进行了理论分析,对比并选择了合理的设计方法。
Theoretical analyzing the Routine Method, Modified Routine Method, Multi-Hinge Ring Method and Beam-Spring Model Method respectively, and choose the appropriate design method after comparison.
该接头刚度模型为梁-弹簧模型法和修正惯用法中的关键参数确定提供了基础,管片的内力计算也更加合理。
Because the model has provided the foundation to determine the key parameters of modified routine method and beam-spring method, calculation of shield tunnel segment becomes more rational.
基于单质量-弹簧模型,研究了能够使弹跳机器人单位距离能量损失最小的步态,给出了能量的消耗表达式。
Using the single mass-spring model, we study the gaits of a hopping robot for the purpose of minimizing the loss of energy per unit distance covered and present our expressions of energy consumption.
根据原位压板试验确定的强度和变形参数计算筏板基础下地基的承载力,并采用集中力弹簧模型计算筏板各点的沉降。
Based on the deformation modulus from the in-situ plate loading test, the settlement of each point on the raft foundation was calculated using spring model with concentrating force.
布的计算机模拟是服装CAD和计算机图形学中的一个重要研究课题,该文提出了一种基于质点-弹簧模型的布模拟方法。
Cloth simulation is one of the important problems in apparel CAD and computer graphics. This paper presents a cloth simulation method based on a mass-spring model.
然后,在对三维有限元分析结果研究的基础上,建立了环缝处的纵向螺栓剪切模型,利用该模型可以计算得到错缝拼装衬砌二维梁-弹簧模型中环间剪切弹簧的刚度;
Based on the 3D analysis result, shear models of ring joint bolt is built and shear parameters between rings needed in 2D analysis with beam-spring model can be obtained by this shear model.
然后,在对三维有限元分析结果研究的基础上,建立了环缝处的纵向螺栓剪切模型,利用该模型可以计算得到错缝拼装衬砌二维梁-弹簧模型中环间剪切弹簧的刚度;
Based on the 3D analysis result, shear models of ring joint bolt is built and shear parameters between rings needed in 2D analysis with beam-spring model can be obtained by this shear model.
应用推荐