纸浆模塑是一种立体造纸技术。它以废纸为原料,在模塑机上由特殊的模具塑造出一定形状的纸制品。它具有四大优势: 原料为废纸,包括板纸、废纸箱纸、废白边纸等,来源广泛; 其制作过程由制浆、吸附成型、干燥定型等工序完成,对环境无害; 可以回收再生利用; 体积比发泡塑料小,可重叠,交通运输方便。纸浆模塑,除作餐盒、餐具外,更多做工业缓冲包装,发展十分迅速。
纸浆模塑制品防掉屑方法的研究-中国包装论文库 关键词:纸浆模塑;掉屑;覆膜;水性上光油 [gap=463]Key words: molded pulp; crumbing; coating; water-soluble varnish
基于60个网页-相关网页
中国造纸杂志社-造纸;纸浆;制浆;行业;专家;设备 关键词:纸浆模塑;模具材料;材料特性;制模方法 [gap=603]Key words:pulp molded; mould materials; material characteristics; molding method
基于28个网页-相关网页
...苏州纸浆模塑,苏州纸浆托盘,苏州纸塑托盘,苏州纸浆托,咨询电话:18662336388苏州纸浆模塑供应价格_纸浆模塑(Moldedpulptray),又名纸托,
基于8个网页-相关网页
The properties of the molded pulp cushion were investigated through the vibration and dropping experiments of the signal acquisition instrument package.
通过对信号采集仪包装件进行振动试验和跌落试验,研究了纸浆模塑缓冲衬垫的抗振和缓冲能力。
参考来源 - 信号采集仪运输包装件缓冲性能研究The pulp molded product and its mould was designed by using of the Pro/E platform.
本文的设计是借助于Pro/E平台进行纸浆模塑及其模具的设计。
参考来源 - 纸浆模塑制品的模具设计研究The structure design of moulded pulp pad unit is the key point for its mechanics performance research, because the pad’s protection relies on the distortion of its structure unit.
纸浆模塑衬垫对产品的保护作用是依靠缓冲结构单元的变形来实现的,所以对单元的结构设计是提高纸浆模塑衬垫力学性能的研究重点。
参考来源 - 纸浆模塑衬垫力学性能的测试和仿真研究However, the rise and development of reverse engineer and rapid prototype technology provides the molded pulp product a great future.
与此同时,逆向工程的兴起和快速成型技术在各行各业中的广泛应用为纸浆模塑行业的发展提供了更广阔的发展前景,注入了新的活力。
参考来源 - 基于RE&RP的纸浆模塑模具关键技术研究And it will make detailed case dissertation on pulp modeling furniture and paper board furniture (corrugated board, honeycomb paper core board).
并针对纸浆模塑家具、纸板家具作出详细案例论述。
参考来源 - 纸质家具的研究与设计Moulded pulp is a new type degraded environmental package and it is widely used for cushion packaging. It is made out of paper-pulp which is injected to mould pattern after fixing.
纸浆模塑是以纸浆(或废纸)为主要原料,经碎解制浆、调料后,注入模具中成型,生产的一种极具缓冲性和韧性极佳的新型可降解环保包装制品。
参考来源 - 纸浆模塑的缓冲机理及优化分析研究·2,447,543篇论文数据,部分数据来源于NoteExpress
本文描述了纸浆模塑餐具的性能优势和市场分析。
The performance superiority and market analysis of pulp model tableware have been described in this paper.
该设备提高了纸浆模塑制品的产量和质量,降低了产品成本。
The equipment can improve output and quality of pulp molding product, and reduce production cost.
本文介绍一种运用参数化设计用于包装的纸浆模塑制品及模具的新方法。
This article introduces a new method in parameterization design of pulp model products for packaging and mould.
应用推荐