go top

injection mould

  • 注塑模具:一种用于制造塑料制品的模具,通过将熔化的塑料注入模具中,然后冷却成型。

网络释义专业释义

  注塑模

安全帽注塑模具设计及模腔三维造型CAD/CAM_机械设计毕业论文、模具设计论文、数控论文范文_毕业论文天下网 关键词:安全帽;注塑模;CAD/CAM。 [gap=722]Key Words: safety helmet; injection mould; CAD/CAM.

基于1438个网页-相关网页

  注塑模具

塑料挂钩座注射模具设计-注塑模具类-木哥机械资料商城[机械毕业设计|论文] 关键词:挂钩座;注塑模具;计算机辅助设计 [gap=467]Key words: plastic pothook; injection mould; CAD

基于1259个网页-相关网页

  [塑料] 注射模

洗衣机水管接口塑料模具的设计_机械设计毕业论文、模具设计论文、数控论文范文_毕业论文天下网 关键词:注射模;侧向抽芯;管接头 [gap=1300]Keywords : injection mould;core-pulling;union.

基于740个网页-相关网页

  注射模具

卡通饮水机底座产品完善及注射成形模具设计-机械设计制造及自动化论文-收费论文 关键词:注射模具;UG软件;模具设计;饮水机; [gap=1104]Key words:injection mould;UG software;mould design;drinking fountains;

基于74个网页-相关网页

短语

plastic injection mould 注塑模 ; 注塑模具 ; 塑料注塑模具 ; 塑料

injection mould for thermoses 热固性塑料注射模

injection mould for thermoplastics 热塑性塑料注射模

plastic injection mould machine 注塑机 ; 注射机

injection mould design 注塑模具设计 ; 注射模设计 ; 模具设计 ; 注塑模设计

injection mould engineer 注塑工程师

Insert Injection Mould 带五金件塑料模具

Design of injection mould 注塑模设计

 更多收起网络短语
  • 注塑模具 - 引用次数:46

    By the use of Pro/E software,the injection mould for automobile locked-lid was designed reasonably.

    合理地设计了汽车内饰件锁扣盖注塑模具

    参考来源 - 汽车锁扣盖注塑模具设计
    注射模 - 引用次数:26

    The process of injection mould design and analysis with CAD/CAE software was stated by an example. Feed route of side cavity in processing was designed based on MasterCAM,and its manufacture process was simulated.

    通过实例,阐述了采用CAD/CAE软件进行注射模设计和分析的过程,并运用MasterCAM对该结构件侧型腔进行了加工刀路设计,拟其加工过程。

    参考来源 - 基于Pro/E
    注射成型 - 引用次数:15

    The structure and working process of an injection mould for moulding a centralized piping port and a cover lid were stated after an analysis on the forming process and technological characteristics of the products.

    通过对中心管件与盖件2个塑件的工艺分析,介绍了注射成型模具的结构及工作过程。

    参考来源 - 基于UG的中心管件与盖件注射模设计
  • 注塑模具 - 引用次数:14

    The injection mould standard part, common part and standard injection mould base libraries were designated with parametrical modeling technology to reduce the repetitive work time and shorten design cycle.

    通过参数化建模,进行标准零件库、常用件库及标准模架库的开发,减少花费在重复性工作上的时间,从而达到缩短注塑模具设计周期的目的。

    参考来源 - 基于混合优化算法的注射模具参数优化研究
  • 型腔模具 - 引用次数:1

    参考来源 - 中小型型腔模具报价理论及其系统研究
  • 注射模

·2,447,543篇论文数据,部分数据来源于NoteExpress

双语例句

  • Experienced in Plastic Injection Mould Making.

    塑料注射模型工作经验

    youdao

  • Designing and manufacturing sheet metal tool, injection mould, and more.

    可进行冷冲模注射等各类模具设计制造

    youdao

  • Application of NC programming in injection mould manufacturing is explained by the example.

    实例说明了数控编程注塑模具制造中的应用

    youdao

更多双语例句
$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定