1.1化学复合镀技术 复合镀层(composite Coating)是指可以通过化学或者电化学的方法,将一种或者数种不溶性的固体颗粒与金属镀层共沉积至基体表面,从而形成在金属镀层中均匀夹杂...
基于86个网页-相关网页
反应火焰喷涂的TiC/Fe金属陶瓷复合涂层 - TNMSC 关键字: 反应火焰喷涂; TiC/Fe; 前驱体; 复合涂层[gap=1154]Key words: reactive flame spray; TiC/Fe; precursor; composite coatings
基于46个网页-相关网页
arc composite coating arc复合涂料
ceramal composite coating 金属陶瓷复合材料涂层
nano-sic composite coating 纳米sic复合镀层
electrodeposited composite coating 复合镀层
copper matrix composite coating Cu基复合涂层
metal ceramic composite coating 金属陶瓷复合涂层
nanometer composite coating 纳米复合镀层
NiCrBSi+Ta composite coating is produced on surface of a medium carbon steel substrate by laser cladding in order to in situ synthesize TaC particle.
通过激光在中碳钢基体表面熔覆NiCrBSi+Ta复合涂层原位生成了TaC颗粒。
参考来源 - 激光熔覆涂层中原位生成TaC的颗粒行为特征The composition, structure and morphology of the coating were analyzed by using XRD, SEM and ED AX methods. The microhardness, wear resistance and behavior of anti-corrsion and anti-oxidation of Ni-SiC composite coating were investigated.
利用X射线衍射技术、SEM及能谱分析等手段,分析复合镀层的成分结构和表面形貌,同时对镀层的显微硬度、耐磨性、抗高温氧化性及耐蚀性等性能也进行了分析研究。
参考来源 - 铝合金基电沉积NiIn the composite coating, the c-axis of HA crystals aligned parallel to the longitudinal direction of the collagen fibrils, which was similar to the relative orientation in natural bone.
复合层中HA的c轴平行于COL纤维的纵向方向,这与人骨中磷灰石晶体和胶原纤维的结构取向相同。
参考来源 - 化学法与电化学法制备HA/COL复合层的研究The technical parameters and the performance of (Ni-P) -SiC composite coating obtained in centrifugal field are also studiedThe cyclic voltammeter and the cathode polarization techniques have been used to study the effect of additives on Ni-P alloy coatings.
本文提出了在离心力场中高速电沉积的方法,并对离心电沉积(Ni-P)-SiC复合镀层的影响因素及镀层性能进行了研究。 利用阴极极化曲线和循环伏安曲线方法研究了各种添加剂在Ni-P合金镀层电沉积过程中的电化学行为。
参考来源 - NiIncreasing the coverage and keeping the integrity of the SiO2/S composite coating was an effective way to reduce coke deposition.
提高复合涂层的涂覆效果与保持涂层的完整性可以有效地降低焦炭的沉积。
参考来源 - SiOAnalyze the structure of composite coating with the use of infrared analysis.
同时也用红外光谱分析了复合涂料的结构。
参考来源 - 纳米环氧富锌复合涂料的制备与性能的研究This thesis mainly studied in two parts, which are cassava starch/chitosan composite films mechanism and composite coating preservation. In part one, mechanisms of cassava starch/chitosan blend films were essentially studied.
本文主要是对木薯淀粉/壳聚糖可食复合膜机理和复合涂膜保鲜的应用两部分进行了研究。
参考来源 - 木薯淀粉/壳聚糖可食复合膜性能及在鲜切菠萝蜜中的应用研究The weight gain of Ti_5Si_3+Al_2O_3 composite coating at 900℃in static air for 240h is 0.44mg/cm~2 and 0.55mg/cm~2 in flowing air.
其中渗硅复合层在900℃静态空气中氧化240h增重约为0.44mg/cm~2,在强气流作用下氧化增重约为0.55mg/cm~2。
参考来源 - 表面涂层TiAl基合金抗高温氧化性能研究·2,447,543篇论文数据,部分数据来源于NoteExpress
Base on these, a composite coating containing nano-powder is prepared by brush plating in this thesis.
基于此,本文创造性地将复合电刷镀技术和纳米粉材料有机结合,成功制备了含纳米粉复合电刷镀层。
The composite coating obtained with this process has such advantages as even distribution, high bonding strength, good corrosion resistance, etc.
本工艺方法所制得的复合镀层具有分布均匀、结合力牢固、耐蚀性能好等优点。
The adhesion between the composite coating and the matrix was fine.
结合力实验也表明镀层与基体具有良好的结合力。
应用推荐