go top

网络释义专业释义

  deformation temperature

变形参数对TA15合金厚板显微组织及力学性能的影响 - TNMSC 关键字: 变形温度;变形程度;显微组织[gap=484]Key words: deformation temperature; deformation degree; microstructure

基于288个网页-相关网页

  temperature of deformation

... temperature of cell operation电解槽操作温度 temperature of deformation变形温度 temperature of entering strip入口带钢温度 ...

基于34个网页-相关网页

  DT

在弱还原性 气氛中加热,观察并记录三个特征温度:变形温度( 气氛中加热,观察并记录三个特征温度:变形温度DT DT)指锥体尖端开始 )指锥体尖端开始 弯曲或变圆时;软化温度( 弯曲或变圆时;软化温度(ST ST)指锥体弯曲锥尖碰及托板、锥体变成...

基于24个网页-相关网页

  distortion temperature

inlet total temperature distortion 进气总温畸变 distortion temperature 变形温度 heat distortion temperature变形温度 ; 变形温度 ; 温度 ; 加热变形温度 ..

基于14个网页-相关网页

短语

热变形温度 HDT ; [材] heat deflection temperature ; heat distortion temperature ; Heat deflection temperature under load

变形温度表 deformation thermometer

变形温度计 deformation thermometer ; deformation thermograph

变形温度仪 deformation thermograph

负荷变形温度 DTUL

加热变形温度 heat distortion temperature ; Heat distortion point

维卡软化和热变形温度 Vicat softening and heat deflection

一为热变形温度 heat distortion temperature ; HDT

 更多收起网络短语
  • deformation temperature - 引用次数:145

    In the present study, deformation temperature has a more important influence on the MDRX process than the strain rate.

    变形温度对亚动态再结晶过程影响较大,高于应变速率对其影响。

    参考来源 - 镁合金高温单向压缩及多向变形行为研究
    deforming temperature - 引用次数:14

    But all of the deforming temperature of them is above the initial melting point.

    但以往研究的变形温度都高于7475的初始熔化温度

    参考来源 - 变形条件对7475铝合金组织和超塑性性能的影响
    deformed temperature - 引用次数:5

    At the same deformed degree, the dynamic recrystallization grain size will grow up with the rising of deformed temperature and decrease with the increase of strain rate.

    并且动态再结晶晶粒尺寸随着变形温度的升高而增大,随着变形速率的升高而减小。

    参考来源 - 304、410S和E01不锈钢高温力学性能研究

·2,447,543篇论文数据,部分数据来源于NoteExpress

新汉英大辞典

变形温度

  • distortion temperature
以上来源于:《新汉英大辞典》

双语例句

  • 具有强度刚度良好变形温度

    It exhibits high strength, rigidity, and good heat distortion temperature.

    youdao

  • 应变速率峰值应力影响变形温度有关

    Effect of strain rates on peak flow stress is relate to deformation temperature.

    youdao

  • 变形温度升高,复合材料发生动态回复结晶。

    Dynamic recovery and recrystallization of the composite generate with the increasing of deformation temperature.

    youdao

更多双语例句

百科

变形温度

金属塑性加工时变形区工件所具有的温度。变形温度取决于金属变形前的加热温度、变形时因能量转化导致的温度升高,以及与周围介质进行热交换导致的温降等。因此,金属进行塑性变形时,工件的温度处于不断变化之中。 金属进行塑性加工时的温度称为变形温度。变形温度范围分热加工(再结晶温度以上)、冷加工(室温)和温加工(热加工和冷加工之间的温度)温度范围。 热变形过程中,变形金属、加工工具及整个设备的温度都是变化的,变形金属组织结构随变形过程的进行不断改变着。因此,人为按规则确定的变形温度范围,在实际制定生产工艺规程时还应依所面对的具体情况作经常地灵活调整与控制,才能确保变形过程顺利地进行。 在室温下进行的冷变形作业,虽说变形前处于冷态,但由于塑性变形时发热效应的影响,常可达到一定高的温度。这时,为了保持接近室温的变形温度,应采取必要的附加措施,例如加强水冷或空冷,延长变形周期间的间隙时间等,以维持应有的变形温度。对于一些冷态下变形抗力很大或性质较脆的金属和合金(如铬、钼、钛及其合金,一些合金钢),常不易有效地进行冷变形,这时可在变形前稍稍加热(对某些钢仅百度),倒可成功地进行加工。可见,变形温度的选择是一个极为复杂需多方面综合研究的问题。

详细内容

以上来源于: 百度百科
$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定