和高温型单头(单端)电热管(电热棒)。
And high temperature-the first single (single side) whatever (electric Stick).
密封垫耐高温型硅橡胶。
采用进口高温型泵浦,压力高,噪音低,稳定性好。
Imported high temperature pump with high pressure, low noise and outstanding stability.
给出了高温型电涡流间隙传感器的设计方法和产品生产工艺。
The design method and the prodution technology of the high temperature electric vortex leakage sensor is proposed.
高温型燃料电池的甲烷重整包括外部重整与内部重整两种方式。
Methane reforming of high temperature fuel cells was realized by external reforming and internal reforming.
通过比较不同温度下的菌丝生长量,分析出广州地区玉米大斑病菌的主要构成属于高温型。
The comparison of weight of hyphae growing among strains shows that constitution of strains caused leaf blight of corn in Guangzhou belongs to type of fungi adapted to high temperature.
对从郎酒厂高温大曲中分离出的14株高温型红曲霉的培养温度和保藏条件进行了初步研究。
The culture temperature and storage conditions of 14 high-temperature monascus strains separated from high-temperature Daqu in Langjiu Distillery were studied.
按性能和用途的不同可分为通用型、超耐低温型、超耐高温型、高强力型、耐油型、医用型等等。
According to the different properties and USES can be divided into general-purpose, ultra-low temperature type, ultra high temperature, high strength-based, oil-based, medical-type and so on.
他发现在生成p型氮化镓的时候需要利用高温氨,以致于把氢原子引入了晶体之中。
He found that producing p-type gallium nitride, which made use of ammonia at high temperatures, trapped hydrogen atoms inside the crystal.
经分析比较,提出了一种用高温超导线圈和常导线圈构成的混合式电磁吸力型悬浮系统方案。
This paper presents a new suspension system with hybrid electromagnets made of high temperature superconductor and normal conductor coil.
为解决毛针织物的缩绒问题利用MK6型高温高压染色机对其进行缩绒整理。
Milling of knitted wool fabric on existing high temperature & high pressure dyeing machine MK6 is dealt with.
试验研究了开箱温度和冷却速度对低、高温时效型合金时效硬化效果的影响。
The effects of opening flask temperature and cooling rate on low and high temperature age-hardening alloy casting are tested and studied.
低、中温型加热器采用翅片式电热元件,高温加热器采用管状元件。
Low and medium temperature heaters have wing shape heating elements and high temperature heater has tubular heating elements.
分析了洁净手术室aahm - H系列超卫型净化空调随机发生的“高温报警”故障,并介绍了该故障的维修过程。
Analyzes the high temperature error happened randomly for Series AAHM-H purifying air-conditioning system in the clean operation room, and describes the process of the troubleshooting.
经过反复筛选确定了较为理想的粘结剂及耐火氧化物的配方,并按照此配方观察了型壳的室温强度、高温强度及残留强度;
The perfect proportion of used binder and refractory was farther confirmed. According to this proportion room temperature strength, high temperature strength and residual strength were observed.
根据试验分析结果,作者提出了一种电磁型高温超导磁浮模型车的结构。
At the end of the paper, the authors propose an electrical magnetic type HTSC maglev vehicle model based on the experimental results.
报道了将活性自转向稠化酸用于高温高压裂缝—孔隙型油藏油井酸化解堵技术。
Active automatic uniform distribution viscous acid unblocking technique used in high temperature and pressure fracture -pore reservoir oil well was reported.
采用料浆喷雾干燥工艺制备团聚型红外辐射粉体材料,经高温焙烧产生尖晶石结构,再用等离子喷涂工艺制备红外辐射涂层。
The title IR radiation powder is prepared by spray dry technology, which is calcined at high temperature to form spinel structure, and then sprayed with plasma forming IR radiation coatings film.
保能高温蝶阀系环保节能型产品,能充分利用热能、有效治理烟气。
This valve is the product of saving energy and environment protection which can administer smoke availably by using heat energy.
应用钙钛矿型氧化物高温质子导电陶瓷,已经制备了几种质子导电器件,虽然尚处于实验室规模但已证明具有肯定的技术功能。
Using high temperature proton conducting ceramics based on perovskite type oxides, some of the devices were made on a laboratory scale, and have been positively verified to work.
植物的高温抗病性是由较高的环境温度所诱导的一种低反应型抗病性。
High temperature resistance (HTR) of plant is a kind of resistance of low infection type, which is induced by higher environment temperature.
论文采用钢试件高温模拟方法对热加工过程中易引起大型锻件内部探伤超标的孔洞型缺陷、夹杂性裂纹等缺陷的修复规律进行了探讨。
The principle of the internal faults (cavities and cracks originated from inclusion) recovery was investigated in the plastic deformation by using the method of physical modeling at high temperature.
介绍了在CARDC等离子体风洞中开展的非烧蚀型防热材料超高温陶瓷(UHTC)的试验研究结果。
The test results of non-ablative ultra-high temperature ceramic materials(UHTC) in one of the plasma wind tunnels of CARDC are introduced in this paper.
研制了一种具有良好刻蚀容差性能的类发夹型高温超导滤波器,在同等刻蚀条件下,达得更高的性能指标。
A high-temperature superconductivity (HTS) quasi-hairpin filter with high etching error tolerance was developed, which had better characteristics than other structures on the same etching condition.
铁素体不锈钢由于高温强度低,直弧型连铸机生产的板坯宽度尺寸难以满足公差要求。
Because the high temperature strength of the ferrite stainless steel is low, the breadth of the slab made from the vertical-arc continuous casting machine do not reach tolerance.
研究了在制造单晶叶片的壳型中添加矿化剂提高壳型高温强度的机理。
The mechanism of adding mineralizer in single crystal blade casting shell mould for enhancing high temperature strength has been studied.
科迪勒拉型伸展与高温变质作用关系密切,伴随花岗质岩体的侵位,并使变质岩系近等温减压之后近等压冷却。
Cordillera type has a close relationship with high-temperature metamorphism and accompanied the emplacement of granitoid, giving rise to isothermal decompression and then isobaric cooling pT-t paths.
研究动态应变时效对18 - 8型奥氏体不锈钢室温及高温下的抗拉及光滑弯曲疲劳强度的影响。
The of effects of dynamic strain aging on the tensile and smooth rotating strength of 18-8 type austenitic stainless steel at room and elevated temperatures were investigated.
研究动态应变时效对18 - 8型奥氏体不锈钢室温及高温下的抗拉及光滑弯曲疲劳强度的影响。
The of effects of dynamic strain aging on the tensile and smooth rotating strength of 18-8 type austenitic stainless steel at room and elevated temperatures were investigated.
应用推荐