介绍了高模量低收缩聚酯帘线的开发与应用情况。
The development and application of HMLS polyester cord are described.
利用废胶粉制备出一种高强度、高模量热固性塑料。
A kind of thermosets with high strength and high modulus was prepared by scrap rubber powder.
研究了高模量碳纤维复合材料结构的电磁铆接工艺。
We have to find out how to do EMR successfully without causing damage in high modulus carbon fiber composites structure.
申板保护被注射了高模量聚氨酯磨损的影响和高度保护。
Shin plate protector is injected with high modulus PU for a high level of impact and abrasion protection.
目前，高模量低收缩工业丝产量已占聚酯工业丝总量的30%。
The amount of HMLS yarn is accounted for 30% of the total output of polyester industrial yarn worldwide.
碳纤维是一种新型的高强度、高模量材料，具有良好的导电能力。
Carbon fiber is a new-style material with high strength, high modulus and good conductive ability.
玄武岩纤维不仅具有高强、高模量的特点，而且耐高温、耐腐蚀。
Basalt fiber has the advantage of high strength and high modulus, furthermore it can resist high temperature and corrosion.
使用国产聚丙烯腈基碳纤维进行石墨化实验，制备高模量的碳纤维。
Graphitization experiments are carried out on PAN-based carbon fibers manufactured in China to prepare high modulus carbon fibers.
碳纤维具有高强度、高模量、耐高温、耐腐蚀等一系列的优异性能。
Due to its a series of high performance, such as high strength, high modulus, heat-resistant, erosion-resistant etc.
为提高复合材料的力学性能，通常使用高强度、高模量的纤维材料，如玻璃纤维等。
To improve the mechanics performance of composite, we often use high strength, high modulus fiber, eg.
百色重力坝地质条件复杂，地基岩体具有高模量比、节理裂隙发育等不良地质现象。
The foundation of Baise gravity dam has bad geological phenomena such as high elastic modulus ratio, joint fissures and large faults etc.
采用高频感应快速加热连续石墨化装置，制备PAN基高模量炭纤维（HMCF）。
The PAN based high modulus carbon fiber(HMCF) has been produced by high speed heating and continuous graphitization apparatus with the high frequency induction heating method.
硬质橡胶是一种具有高强度、高硬度、高模量以及良好无缺口抗冲击强度的特种橡胶制品。
Ebonite is one kind of special rubber product with high strength, high modulus, high hardness and fine unnotched impact resistance.
研究改性锦纶66帘布在半钢子午线轮胎中的应用，并与高模量低收缩聚酯帘布进行比较。
The application of modified nylon 66 cord in LTR tire was investigated and compared to that of HMLS polyester cord.
利用超高分子量pet进行溶液纺丝是目前制取高强度高模量pet纤维的一种重要方法。
Solution spinning of UHMW PET (Ultra-high molecular weight polyethylene terephthalate) is an important way for preparing high strength and high modulus fibers.
高模量低收缩聚酯帘布具有较好的尺寸稳定性，可以提高轮胎的安全性能，并实现轮胎轻量化。
The HMLS polyester cord could be used to improve the tire safety and reduce the tire weight because its better dimensional stability.
高性能纤维作为一种高强度、高模量纤维，大多应用于工业方面。如复合材料、绳索、传送带等。
As one of high intensity, high modulus fibers, high performance fibers (HPF) are widely used in industries, such as composites materials, ropes, conveyer belts and so on.
取向的结果，导致大量的硬段残留取向、应力软化、应力滞后和高变形，以及材料的高模量和高强度。
The orientations of polyurethanes resulted in a large number of the residual orientation , the stress softing and stress hysteresis , the permanent set , the higher modulus and strength of materials .
结果表明，与高模量低收缩聚酯帘布相比，改性锦纶66帘布的强力及强力保持率高，但尺寸稳定性稍差；
The results showed that the modified nylon 66 cord had higher tenacity and tenacity retention, but somewhat lower dimensional stability when compared to HMLS polyester cord;
硬弹性是结晶高聚物在特殊的加工条件下产生的一种独特的性能，具有高模量、高结晶度和高形变下回复的特点。
The hard elasticity is an unusual property which is developed under a special processing. It features high modulus, high crystallinity and highly reversible elasticity.
汽车内部件。10% 玻璃纤维增强。改良的劲度、结构刚度。高模量、高延性。也可用于泡沫塑料面层仪表板。
Automotive interiors. 10% glass-reinforced. Increased stiffness/structural rigidity. High modulus/ductile. Foamed skin instrument panel uses also.
硬弹性材料是结晶或非结晶聚合物在特定的条件下加工而形成的，这类材料表现出高弹性、高模量和突出的低温弹性。
Hard elastic materials are a class of crystalline or non-crystalline polymers produced under special processing conditions, which show high modulus and high elasticity under very low temperature.
当短桩为高模量刚性桩时采用调整长桩弹性模量的方法来调节桩土的荷载分担的效果要比短桩为低模量柔性桩时稍佳。
When the elastic modulus of the short-pile is bigger, adapting the elastic modulus of the long-pile to adjust load share is better than that when the elastic modulus of the short-pile is smaller.
通过对轮胎结构和生产工艺的调整以及合理搭配材料，采用高模量低收缩聚酯帘布骨架材料作胎体生产轻载子午线轮胎。
The radial LT tires were produced using HMLS polyester cord in carcass ply by modifying the structure design and processing technology of tire.
高模量沥青混合料的设计及试验研究表明，通过改进沥青胶浆性能的途径可实现混合料的高模量，从而增强路面的抗车辙能力。
Design and test research of high modulus asphalt mixture show that improving the performance of asphalt mortar can heighten the modulus of mixture to strengthen the rut-resistance of pavement.
聚合物基复合材料把无机物的高模量、尺寸稳定性以及光、电等特性与高分子材料的韧性、易加工性、电绝缘性巧妙地结合起来。
Polymer based composites combined the good process property, electrical insulation and toughness of polymer with the properties of inorganic materials, such as high module, good dimension stability.
本文介绍以TDE- 85环氧树脂作为基体，以间苯二胺(MPD)、间苯二甲胺(A -50)作为固化剂，制备高模量树脂基体的方法。
The prepare method of high modulus resin matrix was introduced, of which epoxy resin TDE-85 was used as matrix, a 50 and MPD were used as curing agents.
本文介绍以TDE- 85环氧树脂作为基体，以间苯二胺(MPD)、间苯二甲胺(A -50)作为固化剂，制备高模量树脂基体的方法。
The prepare method of high modulus resin matrix was introduced, of which epoxy resin TDE-85 was used as matrix, a 50 and MPD were used as curing agents.
应用推荐