曲轴，连杆是新的，并提出了非常高强度钢。
Crankshaft and connecting rods are new, and made out of very high strength steel.
舷顶列板应采用CCS认可的船用高强度钢。
The sheer strakes shall be high tensile steel plates approved by Classification Society.
可焊材料：低碳钢、高强度钢、中碳钢，低合金钢。
Weldable materials: low carbon steel, high-strength steel, medium-carbon steel, low-alloy steel.
可焊材料：低碳钢、高强度钢、中碳钢，低合金钢。
Wwlding material: low carbon steel, high strength steel, medium carbon steel, low alloy steel.
可焊接材料：低碳钢、高强度钢、中碳钢、低合金钢。
Wwlding material:low carbon steel, high strength steel, medium carbon steel, low alloy steel.
对马氏体细晶粒高强度钢的冲击磨损性能进行了研究。
Study on abrasive wear resistance of boronized layer eutecticumed with laser;
变形工艺的制定是微合金高强度钢开发和生产的关键环节。
It is the key aspect of researching and production micro-alloyed steel to draw up deformation parameter.
研究了高强度钢不同镀层的镀层结构、电镀渗氢行为及氢脆性能。
The plating structure, property of hydrogen permeation, hydrogen embrittlement of different plating that used for high-strength steels were studied.
试验结果表明，孔冷挤压显著提高两种超高强度钢的疲劳飞行寿命。
The experimental results show that the coldworked holes significantly extend the fatigue life of ultra-high strength steel.
主要材料包括：高强度钢、不锈钢、高温合金、钛合金、铝合金等。
The metals include high strength steels, stainless steels, superalloys, titanium alloys, aluminum alloys, etc.
相对于常规高强度钢，这些无定形钢具有提高的比强度和耐腐蚀性。
These amorphous steels have increased specific strengths and corrosion resistance compared to conventional high strength steels.
根据试验结果，确定适合加工该型号高强度钢的刀具材料和切削用量。
Based on the results of experiment, the suitable tool material and machining parameters are confirmed.
用电化学动电位极化的方法研究了缓蚀剂对高强度钢环境氢脆性能的影响。
The effect of inhibitor on hydrogen embrittlement of high strength steel has been studied by potentiodynamic polarization technique.
对超高强度钢的氯化铵镀镉与无氰镀镉-钛两种防护镀层进行了对比研究。
The performance of Cadmium plating from ammonium chloride bath and Cd-Ti plating from non-cyanide bath on super high-strength steels were discussed.
介绍了火焰切割对低合金高强度钢在残余应力、淬硬、渗碳等方面的影响。
This article introduces the impact of flame-cutting on high strength lower alloy structural steels from curious aspects Such as remnant stress, quench rigidity, cementite and so on.
以H 13热作模具钢和高强度钢为例，分别重点讨论钢的组织控制和设计。
Taking H13 mold steel and high strength steel as examples respectively, control and design of microstructure in steels are emphasized.
AF 1410超高强度钢是一种抗应力腐蚀和焊接性能较好的新型航空材料。
Superhigh strength steel AF1410 is a type of new aviation steel, which is good for resisting stress corrosion and is not difficult to weld.
影响高强度钢在水介质中的应力腐蚀和腐蚀疲劳裂缝萌生和扩展特性的因素甚多。
There are some factors which influence the characteristics of initiation and propagation of stress corrosion cracking and corrosion fatigue cracking in high-strength steel in a watery environment.
对CSP生产的低碳微钛高强度钢进行了化学相分析和高分辨率透射电镜的观察。
Using chemical phase analysis and high resolution TEM analysis, HSLC steel with microalloyed Ti produced by CSP was studied.
延迟破坏试验﹕此法适合于超高强度钢的氢脆试验﹐是一种灵敏而可靠的试验方法。
Delay: damage test method suitable for high strength steel hydrogen brittleness test, is a sensitive and reliable test method.
试验结果表明焊件的疲劳寿命可以通过打磨焊缝得到改善，尤其对于高强度钢焊件。
The experimental results show that the fatigue life of steel welded joints can be improved by grinding the weld bead, especially for the higher strength steel.
本欧洲标准中所考虑应用的预应力是高强度钢材(钢丝，钢绞线或钢柱)制造的钢筋束。
P The prestress considered in this Eurocode is applied by tendons made of high-strength steel (wires, strands or bars).
高强度钢（100，000防扩散的最低收益率）活塞杆有一个理由，打磨，表面镀铬。
The high strength steel (100,000 psi minimum yield) piston rod has a ground, polished, and chrome plated surface.
通过多次工艺试验，对国产新材料超高强度钢tm 210a的锻造工艺进行了深入的研究。
The forging process for the super high strength steel TM210A has been further researched with several process tests, and more perfect forging parameter has been obtained as well.
试验结果表明：涂层刀片干铣削高强度钢的加工性能优异，工件加工表面质量达到半精磨水平。
The advantages of coated cemented carbide tool in dry milling of high-strength steel are demonstrated, and the workpiece surface roughness reaches the level of semi-finishing grinding.
通过不同的控制冷却工艺实现了用相同的成分获得不同强度等级要求的汽车用先进高强度钢。
The advanced high strength automobile steel of same chemical composition can be manufactured by different controlled cooling processes for different strength classes.
研制成功了一种新型铜基自熔性合金粉末，在高强度钢基体上采用等离子喷焊工艺制备焊层。
A newly developed self fusion Cu-based Cu-Ni-Sn alloy powder and the PTA coating technology are described.
一旦经过冷却和测验，这些钢块就已经准备好用于太空事业和石油钻探这两个十分需要高强度钢材的领域。
Once cooled and tested, the blocks of steel are readyfor use in aerospace and oil-drilling, where high-strength steel is prized.
结果表明，根据动电位极化测试的腐蚀电位和腐蚀电流可以预测高强度钢发生腐蚀氢脆的倾向性。
The results have shown that the possibility of embrittlement of high strength steel can be predicted by corrosion potential and current in potentiodynamic polarization measurement.
结果表明，根据动电位极化测试的腐蚀电位和腐蚀电流可以预测高强度钢发生腐蚀氢脆的倾向性。
The results have shown that the possibility of embrittlement of high strength steel can be predicted by corrosion potential and current in potentiodynamic polarization measurement.
应用推荐