高牙尖斜度与非中心线负载可引起高应力集中。
Higher inclination of cusp and non central loading lead to higher stress.
实际上，小型化通常会导致低触点压力和高应力。
Indeed, miniaturization often results in lower forces and higher stresses.
恒频控制的准谐振变换器存在功率限制和高应力缺陷。
The constant - frequency quasi - resonant converter has the problems of power limitation and high stresses.
利用电阻应变仪测定了高应力弹簧各有效圈上所受的力；
The force on available coils of the spring was measured by means of straingage.
最后，对华北地区应力场特征及高应力背景区等做了讨论。
Finally, the stress field characteristics of the North China and the areas with high stress background are discussed.
冬瓜山矿的矿体埋深大，因而存在高应力，并且各向应力不均衡。
There are high and uneven stresses in the orebody of Dongguashan Mine due to its deep occurrence.
由于含碳量高，所以这种焊条不宜焊接必须承受高应力的机器部件。
The carbon content being high, this kind of welding rod is not fit for welding machine parts that have to withstand high stress.
要提高承受高应力工件的使用寿命，提高其硬度是有效的方法之一。
To improve wear resistance and contact fatigue strength of high loaded mechanical parts, one of best effective methods is to improve surface hardness.
磨浆段螺旋套主要的失效形式为高应力磨料磨损，同时伴有腐蚀磨损。
The main failure form of pulping scroll cover is high stress grinding abrasion accompanying corrosive abrasion.
研究了中碳含硅贝氏体钢不同组织结构对高应力冲击磨损行为的影响。
The high stress impact wear behaviors of bainite steel containing silicon with different microstructure were studied.
这是因为硅使贝氏体铸钢在高应力冲击磨损下表现出不同的失效机制。
The reason is that the impact wear mechanism is different for low and high Si bainitic cast steels.
岩爆的预防和控制对深部高应力区矿床的安全开采具有十分重要的意义。
The prevention and control of rock burst are of great significance for safely exploiting deep deposit in high-stress area.
如果氢元素转移到高应力区域(材料的内部应力)就会导致微结构损伤。
The infused hydrogen migrates to areas of high stress (e. g., material internal stresses) and creates local microstructural damage.
高应力作用下堆石料的颗粒破碎严重，其对堆石体变形的影响不可忽视。
Particle breakage of rockfill materials is serious under high pressure, and its influence on deformation of rockfill cannot be ignored.
改性奥氏体锰钢适用于冲蚀磨损、凿削磨损以及高应力磨损等工况条件下。
The modified austenitic manganese steel is suited for the operating condition of impact-corrosive wear, chisel-cutting wear and high stress wear.
实验发现，高应力冲击磨损后，磨损试样表层形成高硬度的白层与变形层。
The experimental results show that the high hardness white layer and plastically deformed zone are developed on the surface layer under high stress impact wear.
高应力下土与结构接触面抗剪强度研究是当前井壁破裂理论研究的关键之一。
The shear strength between soil and structure interfaces in high stress is one of key research in shaft lining fracture theory.
采动围岩破裂范围和支承压力高应力分布范围取决于开采对岩层的扰动程度。
Ranges of fractured strata and high stress distribution of abutment pressure are all depend on the degree of mining disturbance on stope strata.
混凝土的徐变包括低应力水平下的近似线性徐变和高应力水平下的非线性徐变。
Creep of concrete consists of approximate linear creep at the level of low stress and nonlinear creep at the level of high stress.
螺丝湾电站水轮发电机设计应用双鸽尾磁极联结结构，为高应力转子设计提供了新路。
Using double dovetail in coupling pole is a new idea of design of rotor under high stress.
对高应力水平下粒状土体的破碎特性进行深入研究有助于解决这一类型的岩土工程问题。
Understanding the behavior of soils subjected to high pressures is fundamental to assisting in the solution to these types of geotechnical engineering and geological problems.
工程实践表明，该技术是解决深井高应力软岩巷道、大断面交岔点等支护难题的有效途径。
The result of the practical test showed that the technique was a effective way to solve the problems of high stress road and large span intersection supporting.
分析了高应力条件下弹簧疲劳断裂的主要原因以及用稀土控制弹簧钢夹杂物形态的局限性。
The main reasons of fatigue broken of spring in the condition of higher stress and the limitation of using mish metal to control the form of inclusion in spring steel have been analysed.
高应力磨料磨损或低应力磨料磨损工况条件下，高铬白口铸铁空淬后不须回火可直接应用。
Under high stress or low stress abrasion working conditions, high Cr white cast iron can be used just after it having been air quenched.
然后，根据试验结果得到的大量数据，经分析找出节点环板的高应力区及其大致的应力分布情况。
Subsequently, the high stress areas and the stress distribution of the joint have been found out by handling and analyzing the large quantity data.
然后，根据试验结果得到的大量数据，经分析找出节点环板的高应力区及其大致的应力分布情况。
Subsequently, the high stress areas and the stress distribution of the joint have been found out by handling and analyzing the large quantity data.
应用推荐