本发明包括金属纳米颗粒和用金属纳米颗粒涂层处理的表面。
The invention comprises metal nanoparticles and surfaces treated with a metal nanoparticle coating.
根据实验现象对颗粒涂层过程和坯体的致密化过程进行了详细探讨。
Particles coating process and sintering process of the compact was discussed according to experiment results.
所述至少一个阴极(3)和阳极(4)的至少一个包括第二金属材料的纳米颗粒涂层(5)。
At least one of the at least one cathode (3) and anode (4) comprises a coating of nanoparticles (5) of a second metallic material.
而其中直径为5毫微米(毫微米：一米的十亿分之一)的金属颗粒表面会自动包裹上一层偶氮苯光感涂层。
The metal particles, which were five nanometres (billionths of a metre) across, were themselves coated with a photosensitive compound called azobenzene.
研究了单独添加不同含量的铌与复合添加铌、钛时激光熔覆铁基原位生成颗粒增强复合涂层的组织特点。
The microstructure of the Fe-based clad composite coating reinforced by in-situ particles was investigated, using laser clad FeCSiB powder added with niobium and titanium.
结果表明：金属超细颗粒弥散系的微波吸收与粒度、涂层的厚度及配制方式有关。
The results show clearly that the microwave absorption of dispersions of metallic ultra fine grain relates to particle size, coating thickness, and method preparation.
火焰的高超声速速度缩短了粉末与火焰之间的相互作用时间，而火焰也促使了颗粒增长和涂层分解的低温限制。
The hypersonic velocity of the flame shortens the time of interaction between the powder and flame, while the low temperature of flame limits the grain growth and decomposition of coating.
用X射线衍射研究了陶瓷颗粒复合涂层相的分布；
The X-ray diffraction analysis was used to investigate the phase constituent of ceramic particles in composite coatings.
结果表明，喷涂后的涂层中存在化学不均匀性，原始颗粒越小不均匀性越严重；
The results show that there are chemical inhomogeneity regions in the as-sprayed HA coatings, the smaller the original particle is, the more serious the chemical inhomogeneity is.
本研究利用自制的纳米尺寸的硫化亚铁颗粒作为等离子喷涂的喂料，在钢基体表面制成了纳米硫化亚铁自润滑涂层。
In this paper, the nano iron sulfide plasma spraying feedstocks were made by oneself and the nano self-lubricating coatings on the steel were fabricated by plasma spraying.
复合涂层的磨损机制主要为硬质颗粒的脆性脱落，同时伴随着轻微的显微切削。
The wear mechanism of the coating attributes to the brittleness shedding of the hard phase particles going with a slight micro-cutting.
在芯层的至少一个表面上涂上至少一个涂层，涂层中含有树脂和至少50%体积的填料颗粒。
Spread at least one coating on at least one surface of sandwich layer, contain the resin in the coating and the filler bead of 50% volume at least.
涂层剥落后，切削区产生的瞬时热量聚集使基体粘结相软化，从而导致硬质相颗粒脱落和基体的剧烈磨损。
After the coating broke off, the instantaneous heat builds up and softens the substrate's bonding phase, which results in breaking off of hard phase particles and sharp wear of substrate.
文章还介绍了为预防汽轮机喷嘴和动叶片免受固体颗粒侵蚀所采用的表面硬化处理技术，包括等离子喷涂层和扩散渗层在内；
The paper also briefs the nozzle or moving blade surface hardening treatment technology, including plasma spraying and diffusion layer for preventing the nozzle and moving blade from SPE.
本文总结了涂层厚度、涂料的光谱特性、衬底、使用温度、颗粒度等因素对涂料红外辐射特性的影响。
The effects of layer thickness, spectral characteristics, sample fineness, supports and operating temperature on emission features of infrared coating materials are summarized.
以碳化硅颗粒增强铝基复合材料的加工为例，对复杂形状金刚石薄膜涂层刀具的制备及应用技术提出了合理建议。
This presentation will be beneficial to the manufacturing technologies of diamond film coated tools with complex geometries. The appropriate ways of utilizing these …
纳米氧化铈颗粒改变了锌涂层的表面组织形貌和晶体结构，从而提高了涂层的耐蚀性。
Ceria nanoparticles modify the surface morphology and crystal structure of the zinc matrix in correlation with the increase of corrosion resistance.
结果表明，封孔涂层表面的孔隙基本被封住，封孔剂及其纳米颗粒可渗入涂层的孔隙中起到填充作用，从而降低涂层的孔隙率。
The results show that the pores of the coating surface are basically sealed, sealing agents and nano-particles can penetrate into the pores of the coating, thereby reduce the porosity of the coating.
结果表明：涂层经激光重熔处理后，WC颗粒部分分解形成W2C，同时形成新的硬质相和共晶组织。
The results show that after laser remelting, part of WC particles are decomposed into W2C, at the same time the reaction forms some new compounds.
结果表明，采用溶胶-凝胶旋涂法制备的ITO薄膜是由立方相纳米颗粒构成，随涂层增加，薄膜表面变得平滑。
The experimental results showed that it is absolutely feasible to fabricate ITO film on the quartz matrix by sol-gel techni.
结果表明，采用溶胶-凝胶旋涂法制备的ITO薄膜是由立方相纳米颗粒构成，随涂层增加，薄膜表面变得平滑。
The experimental results showed that it is absolutely feasible to fabricate ITO film on the quartz matrix by sol-gel techni.
应用推荐