一个高效的预条件子是来自多重网格刚度矩阵。
An efficient preconditioner is derived from the multigrid stiffness matrix.
文中采用了几种预条件技术来降低算子方程的条件数。
Several preconditioning techniques have been used to reduce the condition number of the operator equations.
同时,还可使用迭代的预条件双共轭梯度算法进行计算。
An iterative conjugate gradient algorithm is used in all cases.
首先将有理函数阻抗矩阵插值技术应用于采用预条件器加速的矩量法求解过程。
Firstly, impedance matrix interpolation is incorporated in MoM in combination with the preconditioning technique.
把不完全乔里斯基预条件技术应用到其积分方程,极大地改善了其谱特性,加速了矩阵方程的迭代收敛。
The IC precondition technique is applied to the integral equation to improve the spectral properties and accelerate the iteration speed of matrix equation.
本文还研究了几种预条件技术,用于改善算子的条件数,进一步加速迭代,同时用数值结果对比了各自的优劣。
Some preconditioner technique is also studied to improve the condition number and further accelerate iterations, comparisons are made between them by numerical results.
为了克服这一困难,本文通过引进一个仿射变换矩阵,构造仿射投影既约预条件共轭梯度路径来搜索获得迭代方向。
In order to overcome the difficulties, we introduce an affine scaling matrix, and form the affine scaling reduced preconditional conjugate gradient path to obtain a new accepted step.
两个典型算例的理论分析和实际计算表明,这种预条件方法可以降低方程的迭代次数约30%,明显减少方程求解时间。
The theoretical analysis and numerical results of two typical examples show that this method can decrease the numbers of iterative by30%and reduce the computation time greatly.
考察了聚合反应条件,如溶剂种类、聚合温度、模板浓度、引发剂用量、转速、预聚合时间等对分子印迹聚合物微球特性的影响。
The effects of reaction conditions were studied, including the kind of solvent, polymerization temperature, the concentration of template and initiator, rotational speed and pre-polymerization time.
对预柱吸附法捕集鲜花头香的条件进行了讨论。
The conditions of trapping of fragrance volatiles have also been discussed.
为获得理想的预硫化效果,必须严格控制各阶段的反应条件。
In order to obtain the ideal presulfiding effect, the conditions of various stages should be controled strictly.
影响冻干角膜效果的因素涉及方方面面,诸如保护剂系统,预冻温度,降温速率,冷冻干燥条件等。
There are a lot of factors that affect the quality, such as protective agent, freezing temperature, freezing rate, freeze - drying conditions.
在石英管原子化器的进口管进行加热预原子化,能抑制形成氢化物元素对铋的干扰,试验了测定铋的各项分析条件。
By heating the intake tube of quartz atomizer the suppression of interferences from hydride forming elements was obtained. Other conditions were also studied for Bi determination.
对流态化预还原过程中碳吸附条件下赤铁矿粉的物化性质、结构变化规律进行了研究。
The present paper studies the law of changes in the physical and chemical properties and structure of the hematite ore fines under the absorption condition in the process of fluidized pre-reduction.
利用WMO推荐的气候异常度指标,确定了气候条件(年景)的定量评价模式、旱涝等级标准及旱涝趋势预评价模式;
The quantitative assessment models of climate conditions were set according to a WMO's criterion of climate abnormal degree.
高速线、棒材热轧生产线的预精轧段和精轧段用轧辊的工作条件十分恶劣。
Working condition of roller rings used in finishing roll sector or pre-finishing roll sector of high speed line or rod rolling mill production line is extremely vile.
研究了预涂动态膜制备工艺条件对乳化油废水处理效果的影响及其清洗工艺。
The impact of the preparing conditions of the precoating dynamic membrane on the treatment of emulsified oily wastewater and membrane cleaning technology have been studied.
利用ANSYS软件,较真实地模拟屋盖的边界条件和支座刚度的影响,分析了拉索的初始预拉力取值。
The ANSYS software is used to analyze the pretension of cable based on truly simulating the boundary condition and supporting rigidity.
结果表明,选择适当的软段组分和制备条件,通过半预聚体方式制备三软段聚氨酯弹性体是可行的。
The results showed that PU elastomers with broad glass transition temperature and damping temperature could be prepared with three soft segments by semi-prepolymer method at appropriate conditions.
研究了化学镀锡预镀溶液的组成和工艺条件对镀层厚度和表面形貌的影响。
The effects of the composition and technological conditions of electroless tin preplating bath on the thickness and morphology of the coatings are investigated.
分别对预聚反应时间、温度进行了考察,确定了合适的反应条件;
The time and temperature of prepolymerization were investigated, and the appropriate reaction conditions were ascertained.
根据铁水预脱硫反应的热力学函数和脱硫反应速率,分析了有利于铁水预脱硫的条件。
Based on thermodynamic function of hot metal predesulphurizing reaction and desulphurizing reaction rate, the conditions beneficial to hot metal predesulphurization was analyzed.
用集合的近似凸性研究函数的预不变凸性,在较弱的假设下获得了预不变凸性的一些等价条件。
Preconvex functions are studied by applying nearly convexity of sets in this paper. Under weaker assumptions, some equivalent conditions for preconvexity are derived.
考察了微波消解条件、预还原条件和干扰的影响。
The experimental conditions of microwave digestion, prereduction, and interferences were investigated.
对纺丝、预氧化、碳化等工艺过程进行不同条件的实验,探讨了工艺条件与碳纤维性能之间的关系。
Experiments are made in different technological conditions and relations to the property of carbon fiber is investigated.
在复杂环境条件下对一楼房进行保护性部分爆破拆除,采用机械预切割、折叠定向爆破倒塌的控制拆除方案。
Under complicated conditions, a building was partially demolished through controlled blasting. Mechanical pre-cutting was carried out before the building was collapsed by folding directional blasting.
通过热失重TGA分析以及考察加工成型过程中工艺参数变化对复合材料介电性能、力学性能的影响 ,优化了预浸料热压成型工艺条件。
The prepreg hot pressing condition is optimized by analyzing TGA and studying influence of parameters on dielectric and mechanical properties of composites.
研究了在危险天气条件下,在雷达管制空域下,计算航空器预达时间的问题。
Discussing problems of how to forecast ETA (estimated time of arrival) in given bad weather conditions of an air-space within the reach of monitoring radars.
条件预加载确保所有函数调用时间相同。
Conditional advance loading ensures that all calls to the function take the same amount of time.
研究了纤维的预辐照剂量、单体浓度、摩尔盐含量、交联剂含量以及接枝温度和时间等条件对接枝共聚反应的影响。
The effects of pre irradiation dose, monomer, Mohr's salt and crosslinking agent concentration, grafting temperature and reaction time on grating copolymerization were investigated.
应用推荐