麦克弗森踢了个角球，詹姆斯头球顶出横梁后出界。
McPherson took the corner and James crashed his header off the crossbar and over the line.
顶出机构是推杆推出的一次脱出机构。
The knockouts system uses once ejecting mechanism that lifter pushes out.
产品可能会挂在斜顶上，需考虑二次顶出。
The part may hang on the Angle lifter, so we need to consider two stage ejection.
可调式顶出装置，更适应于不同高度的产品。
Adjustabel ejection device can be applied to any kinds of products.
采用顶出试验测试种植体-骨界面的结合强度。
The push out test was used to measure the implant bone integrate strength.
垫刀条顶出装置。
列举实例介绍一种新型的“扣机式”二次顶出机构。
A new latch-style secondary ejection mechanism is illustrated.
采用拉钩机构顶出，工作可靠，通用性强，工作效率高。
The pulling hook mechanism is used for ejection with reliable operation, good generalization and high efficiency.
三板模；点浇口；模外定距分型；定模限位顶出；模具结构。
Three-plate mold; Pointed gate; Mold ranging parting; Restricted ejector of fixed-die; Mold structure.
介绍了一种从斜顶内顶杆顶出，防止产品拉伤、位移的基本结构。
Introduced a inner ejection pin in Angle ejector structure that prevent product pulling pulling injury and displacement.
主机部分包括机身、主缸、压边装置、顶出缸及充液装置等组成。
The mainframe includes the body of machine, main cylinder and press edge fitting, and cylinder of pack out and filling liquid equipment etc.
纤弱的茎，修长的叶，最高处顶出一蓬芦花，金黄、雪白、淡金。
Slim stem, long leaf, a flower come out on the top, golden, snow white, light yellow.
老实说，当时我看到对方起球，我就想飞身将这个皮球顶出底线。
To tell the truth, I just threw myself towards the ball trying to put it out for a corner.
顶出力大，顶杆应有足够强度，顶出应均匀，顶杆不宜兼作型芯。
Top effort, mandril should have sufficient strength, should head out of uniform, mandrel not served as core.
本文介绍了顶杆安全半径的计算和采用压缩弹簧使顶出杆复位的方法。
The article introduces the calculating method of the safety value of ejector radius and the returning way of the ejector with the compressive spring.
模具结构中采用了定模强制脱模，顺序开模，滑动型芯延时顶出等机构。
Several mechanisms such as forced stripper, sequenced opening, delayed goring of the sliding core are applied in the design.
脱模时只需按相应按钮顶出模具里的试件，自动实现脱模，非常简单方便。
Get the molding tool out can just push the correspond button, the instrument can push the molding tool out auto, makes it very simple.
专利转动系统与专利自动顶出装置，适合任何饮料杯置杯、取杯，快捷方便。
The patent transmission system and cup in-and-out device is applied to almost all kinds of containers with a fast and convenient container placing and ejection.
专利转动系统与专利自动顶出装置，适合任何饮料杯置杯、取杯，快捷方便。
The patent automatic running system and packing out system, suitable for any kinds of containers. It is convenient to put and to take out the cup.
介绍了船舶在航更换压载水的各种方法，包括逐一更换法，注入顶出法和稀释法。
Different Ballast Water Exchange Methods for ships underway are described, including the Sequential Method, the Flow-through Method and the Dilution Method.
在侧抽芯机构中设计出一种顶出机构，改善塑件的成型质量，防止塑件脱模时的变形。
An ejection system was designed in the side core_pulling mechanism to improve the moulding quality and avoid deformation of the plastic part during demoulding.
顶出板组件的运动有力地把实体新棒从环形套管拉出，因此使环形套管在直径上收缩。
The ejector plate assembly's movement effectively withdraws the central mandrel from the collapsible sleeve, thereby causing it to contract in diameter.
在扫数模具计划中，必须供给未加工和已加工的工序图，以及产品顶出及废料脱落方法。
Provision for loading and unloading of raw materials for all dies, as well as part ejection and scrap removal will be covered during the die design.
通过对工具箱的塑件工艺分析，确定了直浇口浇注系统、推杆、顶板联合顶出的模具结构。
Through analyzing moulding technology of the toolbox, designed a injection mold with straight gate injection system, ejector rod and stripper plate united ejection mechanism.
所述侧芯具有用于形成所述物品的模制位置和 用于将所述物品从所述芯块顶出的顶出位置。
The side core has a molding position for forming the article, and an ejection position for ejecting the article from the core block.
论述了锤模锻造锻件的顶出机构应达到的基本要求；介绍了顶出机构的几种形式及设计要点；
The main demands which must be attained for forgings ejection mechanism in drop hammer forging were discussed. several patterns and the design essentials of the ejection mechanism were introduced.
介绍了塑料注射模具实用顶出系统的计算机辅助设计。使用该软件可设计不同形式的顶出系统。
Computer aided design of a practical ejection system for injection mold is introduced. With this software, various ejection systems can be designed.
然后，这些部件可以用多种方法顶出，如升降机、凸轮、架台、提升阀、螺栓结构和汽缸结构。
Then these parts are ejected with a variety of lifters, cams, racks, poppit valves, screws, and cylinders.
介绍一种利用压缩空气顶出塑料件的注射模结构。并指出设计、制造过程中应注意的几个问题。
It introduce an injection mold structure to eject the plastics part with compressed air, and points out several problems to pay attention to during the designing and manufacturing.
介绍一种利用压缩空气顶出塑料件的注射模结构。并指出设计、制造过程中应注意的几个问题。
It introduce an injection mold structure to eject the plastics part with compressed air, and points out several problems to pay attention to during the designing and manufacturing.
应用推荐