太阳光环也是由微小、扁平、六面形的冰晶在同地面平行地飘落所引起的。
Solar halos are also caused by small, flat, six-sided, ice crystals that float down parallel to the ground.
实验结果表明,该系统可有效改变薄膜反射镜的面形。
Experimental results show that the system is feasible for changing the surface profiles of a membrane mirror.
空间可展天线由索网和可展构架组成,形成索网抛物面形反射面。
Space deployable antenna is composed of a reflective mesh and a deployable truss, forming a mesh parabolic surface.
大口径望远镜主镜的面形精度是影响望远镜成像质量的关键因素之一。
The surface figure precision of the primary mirror in a large aperture telescope is a key factor influencing the imaging quality.
快速而稳定的三维面形检测技术对于工业产品质量控制具有重要的意义。
Fast and robust 3d shape inspection is of big importance for industrial quality control.
提出了一种测量三维面形的新方法。
A new method of three dimension shape measurement is presented.
标准光学面形的建立与绝对检验。
Absolute measurement and foundation of standard optical surface.
一种测量非球面光学零件面形的新方法。
A new method of surface shape measurement of aspherical optical components.
最后, 采用三角测量原理得到被测物体的面形。
Then, the shapes of objects are reconstructed with triangulation.
介绍了选择五棱镜的方法和减小面形误差影响的方法。
The methods for selecting penta prism and reducing the effect of surface profile error on detection are introduced.
尤其是大型高精度的非球面光学零件,面形检测难度更大。
The surface testing of aspheric and optical part is especially difficult, which is big scale and high precision.
通过控制研磨参数,使得磨具磨损均匀,从而保证磨具面形精度。
This method is to control lapping parameters, make lapping tool wear well distributedly and thus assures lapping tool surface accuracy.
三维面形测量具有很高精度,位相测量轮廓术是其中一种重要方法。
Because of the precision of phase measuring profilometry, it is an important way of three-dimensional measuring.
研究了高能电子、高能质子辐照对红外熔石英性质、光学面形的影响。
Radiation effects of high energy electrons and protons on properties, optical surface figure of infrared fused silica were studied.
高能量、高分辨力光学系统给传统的光学面形评价指标提出了新的要求。
High energy, high resolution optical system put forward new demand for traditional analysis of surface profile.
在较高精度面形测量的光学方法中,很多测量范围都受到光波波长的限制。
The ranges of most optical methods which are used in high precision surface profiling, are limited by the wavelength of light.
高能质子辐照没引起面形明显变化。高能质子辐照对反射光谱特性没有影响。
The results showed that irradiation effect of high energy protons on the optical surface stability and the reflective property was not obvious.
经数据修正和预处理,通过MATLAB软件计算得到整个镜子的面形特征参数。
After correcting data and pretreating, characteristic parameter of whole aspherical surface is obtained by MATLAB software.
用计算机模拟了制作菲涅耳透镜时灰度掩模的曝光量分布和菲涅耳透镜的面形结构。
We simulated the light exposure distribution of the mask and structure of the Fresnel lens in computer.
数字式激光平面干涉仪是用于测量光学元件面形和无焦光学系统波像差的光学仪器。
Digital laser plane interferometer is used to measure the surface of optical components and the wavefront aberration of non-confocal optical system.
所提方法扩大了可测深度范围,可用于测量面形较陡的连续表面或不连续深结构表面。
Advantage of the approach is that the depth measurement range is expanded very much, it can be used to measure the profile of the deep or discontinuous surface.
根据激光扫描平移加旋转法的测量原理,推导出了非球面光学零件面形测量的数学模型;
The mathematical model of the surface shape measurement of aspherical optical components is built up according to the laser scanning measurement principle by the translation & rotation method.
面形检测采用边缘定位的方法,并且结合了曲线拟合的方法求解一维位移场来计算误差。
It USES edge localization and curve fitting to solve one dimension displacement field and calculate the error.
反向条纹投影技术是一种应用于在线或批量检测的快速而稳定的光学三维面形检测技术。
Inverse fringe projection technique is one of the fast and robust optical 3d shape inspection techniques, which is applied to online or batch inspection.
在此基础上,通过施加力或位移进行多点调节,找到合理的调节方法,使面形精度达到要求。
On this basis, force or displacement load is exerted to find a reasonable adjusting method, in the way the surface figure requirement can be met.
并根据加工过程中的进给步距和不同波长面形误差的特征分析了研抛盘直径的合理取值范围。
Based on feeding pace and error component of various wavelength, reasonable diameter of abrasive disk is analyzed.
对一个非球面反射镜进行了实测并对测量结果进行插值运算,进而拟合出零件面形的曲线方程。
An aspherical reflector is tested and testing data are processed by the interpolation calculation, then the curve equation of the component surface shape is fitted.
对一个非球面反射镜进行了实测并对测量结果进行插值运算,进而拟合出零件面形的曲线方程。
An aspherical reflector is tested and testing data are processed by the interpolation calculation, then the curve equation of the component surface shape is fitted.
应用推荐