本文介绍电子元件的清洗工艺与非耗臭氧清洗材料的选择，以便达到保护臭氧层的目的。
This paper introduces about the cleaning technology and non-ODS cleaning materials of the electronics components, resulting in protection of the ozone layer.
研究结果表明押存在耗散元件的介观电路的库仑阻塞效应不仅与电路的非耗散有关熏而且与耗散电阻有关。
Our research results show that the condition for Coulomb blockade in the dissipative mesoscopic circuit is related not only to the non-dissipative component, but also to the dissipative resistance.
科罗达等效方法可将抛物线型无损非均匀传输线用均匀传输线及若干集中参数元件组成的等效电路表示。
Based on Kuroda's identities, parabolic lossless nonuniform transmission line(NTL) can be represented by the equivalent circuit consisting of lossless uniform transmission line and lumped elements.
航空航天系列。电气和光学连接的元件。试验方法。第512部分：密封的连接件外壳的非移动固定件的效果。
Aerospace series - Elements of electrical and optical connection - Test methods - Part 512: effectiveness of non-removable fixing of hermetically sealed connector shell.
研究了强激光作用下非热平衡状态光学元件的热透镜效应。
This paper studies the thermal lensing effect of optical element under laser heating at non-thermal equilibrium state.
理论分析及实验表明，采用CCD为光电转换元件的非接触测量厚度法是可行的。
Principle analysis and experiment result indicate that the non-contact thickness measurement method using CCD as photoelectric transformation element is feasible.
利用A NSYS有限元分析软件对啮合同向双螺杆挤出机的螺纹元件流场进行了三维等温非牛顿模拟分析。
Three-dimensional flow simulations of the flight element in an intermeshing co-rotating twin screw extruder are performed by solving the Navier Stokes equations with a finite element package, ANSYS.
本文探讨了铁封元件的非匹配封接原理及其结构设计。
The principle of no-matching sealing and the structure design of iron-sealing component were required.
通过激光束 （35）能够使所述有源元件从非激活态转化为具有不同形状的激活 态。
The active elements can be transferred from a non-activated state to an activated state with a different shape by a laser beam (35).
该算法先求各负荷点的最小路，再分别考虑最小路上的元件和非最小路上的元件对负荷点可靠性的贡献。
It finds out the minimal path for each load, considers the different contributions of the elements on the path and out of the path to the reliability of the load point.
该网络的特点是采用了技术成熟、价格低廉的非互易铁氧体移相器作为变极化的基础元件。
The feature of this network is that the cheap and mature nonreciprocal ferrite phase shiftersare used as the basic variable polarization devices.
具体地说，该干扰可靠性值可能与非接触式传输元件(100)对外场或外部影响的易感染性有关。
In particular, this interference reliability value may relate to a liability of the contactless transmission element (100) to an external field or to external influences.
本发明包含用于支承连续浇铸机中的滚动段的机械元件的非旋转轴，其具有基本为圆形的横截面。
The invention comprises a non-rotating shaft for supporting a mechanical element of a roll segment in a continuous casting machine, having an essentially circular cross-section.
该非晶态金属体磁元件可包括弧形表面，并且优选包括两个设置成彼此相对的弧形表面。
The bulk amorphous metal magnetic component may include an arcuate surface, and preferably includes two arcuate surfaces that are disposed opposite to each other.
本发明关于正极使用了具有特定的细孔构造的活性炭的非水系锂型蓄电元件。
This invention provides a nonaqueous lithium-type storage element using an activated carbon having a specific porous structure in a positive electrode.
介绍了采用新型传感元件GP- 16火焰检测电子管实现非接触式火焰检测的方法，并给出了完成其功能的电路图。
A method of realizing untouched fire test by a new transducer GP 16 fire test electron tube was introduced, and the circuit for finishing the functions was given.
合理建模非编码序列对正确识别DNA序列中的调控元件非常重要。
Modeling non coding background sequences appropriately is important for the detection of regulatory elements from DNA sequences.
在此元件中，稍微施加电压即可使半导体在非磁与铁磁两种状态之间切换。
In this device, a small voltage would switch the semiconductor between nonmagnetic and ferromagnetic states.
指定的元件应该要位于设计工具中，且应该有非空白的名称。
The specified component should be sited in the designer and should have a non-empty name.
具有非圆曲线外形的零件形状复杂，传统的靠模加工法柔性差，不能满足机电元件类型多样化、产品更新换代快的要求。
The parts with non circularity curve have very complex shape. The traditional machining method has bad flexibility, and it can't respond the variety of the electromechanical components updated.
可控震源在野外工作的环境恶劣，再有非规范性操作或不及时进行系统维护等情况，就会造成系统元件的损坏。
The adverse circumstances of filed work, incorrect operation and maintenance delayed often cause component destroyed and make the volumetric efficiency low down.
旋转圆盘是广泛应用于旋转机械装置中的基本结构元件，圆盘在高速旋转状态下会表现出与低速或非旋转状态下迥异的力学性能。
There always exhibits distinct mechanical behaviors of a rotating disk with high-speed comparing to a rotating disk with low-speed or a non-rotating disk.
该方法克服了传统刀口扫描法的缺陷， 消除了由于离散型光学元件的离散性产生的空间非平移不变性的影响，减小了测量误差，提高了精确度。
The method avoids the influence of non-isoplanantic result from the dispersancy position between the edge and the array for measured MTF, and its precision was improved accordingly.
该研究对多种天然的或人工设计的生物学元件进行了合理而系统的组合以获得重构的或非天然的“生物系统”。
Synthetic biology is the synthesis of complex, biologically based(or inspired) systems which display functions that do not exist in nature.
首先我们探讨在小尺寸元件叉合效应对尺寸的影响，发现非匹配因素随著元件面积的增加而递减。
Firstly we aim at the size and interdigit effects for small area TFTs. It is observed that the mismatching factor decreases rapidly with the increase of the device's area.
提出了一种圆度误差测量数据采集系统，该系统采用非接触电涡流传感器作为圆度误差数据的检测元件，采用高速数据采集卡采集圆度误差数据。
The detecting element adopts the non-contacting current vortex sensors in the system. The data collecting of circular error is equiped with the high speed acquisition card.
非阀式速度伺服是由电磁离合器作控制元件的电液伺服系统，它具有结构简单、抗污染力强的优点。
The speed servo system which has no servovalve is controlled by a electromagnetic clutch. This device is simple in construction and it has high resistance to contaminant.
该实现装置还可以包括选自包含集成无源电路或者网络单独地或者与前面提及的非IC元件组合的组中的元件。
The means for realizing can also comprise elements selected from the group of integrated passive circuits or networks alone or in combination with the aforementioned non IC elements.
非编码DNA，包括内含子，重复元件，和潜在激活转座子，其长期的沉默需要有效的机制。
Noncoding DNA, containing introns, repetitive elements, and potentially active transposable elements, requires effective mechanisms for its long-term silencing.
实验结果还表明：采用非啮合多过程元件螺杆组合得到的试样的力学性能均比采用常规螺纹元件螺杆组合得到的试样的力学性能好。
These experiment results also showed that mechanical properties of samples extruded by the combined configuration with NI-MPE were higher than those extruded by the common screw configuration.
应用推荐