全静压系统检查仪对飞机上该系统的气密性与仪表指示的准确性有直接影响。
Aero pitot-static pressure system tester has direct effects on the airtightness of the air - borne pitot - static pressure system and the accuracy of meter reading.
工程压力系统公司(EPSI)通过窑炉升级提高了旧式热等静压系统HIP的可靠性和生产率。
Engineered Pressure systems, inc. (EPSI) can increase the reliability and productivity of older hot isostatic press (HIP) systems with a furnace upgrade.
针对一起由静压孔堵塞造成的空难事故，对飞机全静压系统静压孔堵塞后，座舱仪表显示的空速和马赫数进行了分析，讨论了静压孔堵塞后仪表显示速度和马赫数的特点。
After pitot static vents of total static pressure system are covered, the real airspeed, Mach number and pressure altitude are not displayed from cockpit instrument, and the accident might happen.
通过对火炮电控静压驱动系统的实测试验，获得了输出压力—流量曲线，验证了恒功率特性。
The output pressure-flow curve was obtained by testing the electronic control hydrostatic driving system, which confirmed the characteristic of constant power.
依据流体动力学原理，利用日光温室管网灌溉的静压能和文丘里管的特性，设计出在日光温室正常灌溉情况下的自动施肥系统。
An automatic topdressing system was designed on the base of the principle of hydrokinetics using energy of static pressure for pipe irrigation and the feature of Venturi pipe in solar greenhouse.
皮托静压探头、总温探头和迎角叶片用来提供大气数据信息给不同的应用系统，他们位于前机身在右侧。
The pitot static probes, temperature probe and alpha vanes provide air data information to the various using system, they are located on the left and right sides of the forward fuselage.
本文对飞行模拟器运动系统的静压伺服作动器进行了分析，介绍了系统主要元件的结构原理。
This paper analyzes hydrostatic servo actuator in motion system for flight simulator, and introduces structural principle of main component of the system.
变风量空调控制系统以变频调速为手段，分时段设定静压值以实现节能。
And adjustable speed the variable air volume air conditioning automatic control system saves energy through setting different static pressure values in different time periods.
设计中增加了液压油冲洗回路、压力滤油器和压力切断装置，解决了静压传动系统应用设计中的问题。
Hydraulic oil flush return circuit, pressure filter and pressure breaking device are added to the systems, solving the problems in design and application of hydrostatic transmission systems.
本研究中的椎体成形术系统包括高粘度PM MA水泥，并使用一种流体静压手件以加强水泥调配和流量控制。
The vertebroplasty system investigated in this study comprises a high viscosity PMMA cement and USES a hydrostatic pressure hand piece for enhanced cement allocation and flow control.
对传统铁路客车空调系统送风不均匀的原因进行了详细分析，同时介绍了静压送风道的结构，对不同类型的静压送风系统进行了送风均匀性测试。
The reason that supply air is not uniform for traditional air conditioning system of passenger car are analyzed, the design methods of static pressure supply air duct are given.
车辆将被静压和车轮被确保安全，以使车辆在轨道交通系统短期旅程下面滑行。
The vehicle will be jacked up and its wheels secured to enable the Orbiter Transport System, or OTS, to slide underneath it for the short trip.
与普通设计方法相比，两种不同结构液体静压轴承经优化设计后，其单位总功耗的主轴系统刚度都可成倍增加。
After the optimum design for this two different structure hydrostatic bearings, their spindle system rigids per unit power consumption will be doubled.
为了改善传统轧辊系统由于集中载荷作用引起的工作辊变形，研究制造了一种新型的轧辊静压支承，已初步证实其可靠性和优越性。
To improve the working roll's deformation caused by the point load of the traditional roll system, a new type hearing of the roll was established and proved to be reliable and advantageous.
论述了静压式油罐计量系统的工作原理、设计思想、测量精度及实用特点。
The principle of the hydrostatic gauge of oil tanks is described and the designing thought, measuring precision are given in this paper.
本文确切地指出了在真空中静压气浮轴承系统出现不稳定的原因。
The cause of instabilities in aerostatic bearing systems operated in a vacuum environment is studied in this paper.
提出一种基于静压轴承原理的新型测力缸塞系统。
The paper introduces a new kind of standard pressure produced cylinder ram system based on the hydrostatic bearing.
测定了环流循环除尘系统内的静压分布。
The pressure distributions of the circumfluent cyclone system (CFCS) are studied experimentally in detail.
针对柔性应力传递系统，申请了“一种带盲孔的陶瓷管冷等静压成型装置”的专利(已受理)。
For the flexible stress transfer system, we present an application for patent which is a CIP device for molding a ceramic tube with blind hole.
静压法储罐计量系统(HTG)的原理就是用压力或差压变送器测量油品介质作用在罐底部静压的方法来测量储罐内介质质量。
The work principle of HTG is that medium quality in oil tank is measured with the method that static pressure of bottom of oil tank is measured with pressure or differential pressure transmitter.
简要介绍了HWS静压造型线的组成，较详细地介绍了HWS静压造型线的液压系统的组成，并分析了该线的几种典型液压回路。
The HWS moulding line was introduced briefly and its hydraulic system was introduced in detail lin this paper. Some typical hydraulic cycle system were analyzed also.
利用数值模拟的方法，研究了径向引入引出型分配、汇流集箱系统的静压分布规律。
Numerical method is used to study the static pressure distribution in the headers with steam flowing in and flowing out radial.
用单油垫的油膜刚度值来表示柱面和球面轴颈两种极轴静压支承系统三个方向的刚度。
The stiffness of the polar axis' hydrostatic oil pads system in three directions was represented by the stiffness value of a single oil pad in two types of cylindrical and spherical journal.
本文介绍了德国HWS公司的EFA SD6静压造型自动线，对造型线的组成、控制系统、工作过程等进行了详细的介绍，并对存在的问题进行了改进。
Model EFA-SD6 automatic moulding line of German company HWS has been introduced in details of its component part, control system, working process etc. The existing problems have been solved.
建筑消防供水系统中，当消防水箱不能满足静压要求时，应设增压设施。
The pressure facilities should be used to increase the water pressure in a fire water supply system when static pressure in a water tank is inadequate.
本文对香港地区某办公大楼变风量空调系统进行模拟研究，分析定静压控制方式下的系统性能，并将模拟结果与测试数据进行了比较，其吻合较好。
The measured system performance data were compared with predictions of the simulation program and it shows that the program predictions are in reasonably good agreement with the measured data.
介绍了磨机动静压轴承系统的虚拟设计。
This paper discussed virtual design of hydrodynamic bearing system of Boll mill.
指出集中空调冷却水系统为开式系统，一般不适用功率三次方定律，静压头应为冷却塔塔体扬程，并提出了冷却水泵变速时轴功率的计算公式；
Points out that the cubic law of pump power is not valid for the cooling water system of central air conditioning for it is an open system. The static head should be the lift in a cooling tower.
详细分析了液压系统中所涉及的静压支承、伺服液压缸、蓄能器组和过滤器等关键技术，并提出了相应的设计方案。
Several key techniques including hydrostatic bearing, servo hydraulic cylinder, accumulators and filters are analyzed in detail. In addition, the relative proposals for some technique are discussed.
详细分析了液压系统中所涉及的静压支承、伺服液压缸、蓄能器组和过滤器等关键技术，并提出了相应的设计方案。
Several key techniques including hydrostatic bearing, servo hydraulic cylinder, accumulators and filters are analyzed in detail. In addition, the relative proposals for some technique are discussed.
应用推荐