加入除油和薄荷外的其他原料，充分混合，直到糖溶解。
Add rest of ingredients except oil and mint, and blend well, until sugar is dissolved.
卤代烃是一类高效金属除油清洗剂。
除油是钢铁工件表面处理最为常见的工序。
Disposing oil is broadly applied in iron and steel surface treatment.
针对油田含油污水，研制开发出新型横向流除油器。
The new type transverse flow oil separator is exploited for treating the oil bearing sewage in the oil field.
有机溶剂除油：利用有机溶剂清除制件表面油污的过程。
Organic solvent oil removal: use organic solvent cleared surface process of oil parts.
从斜板的原理及结构上分析其除油、除渣效果的高效性。
Its high efficiency in removing oil from settled slag is analyzed from the principle and structure of baffle-plate.
从而提出了解决方法：产品除油后用酸盐活化替代酸洗。
And thereby settlement for embrittlement was suggested as follows: activation with acidic salt instead of pickling for degreased products.
结果表明，填料的空间构成形式对聚结除油效率有重要影响。
The result shows that the spatial distribution of coalescent filler has great effect on the coalescent removal of oil.
萃取提锗后的萃余液经除油处理后，对锌电解工艺无不良影响。
After deoiling, the remainder solution can be used for zinc electro-winning without negative effects.
分析了除油、镀液维护、物料添加及操作环节对镀层质量的影响。
The effects of degreasing, bath maintenance, material addition and operation conditions on the quality of deposits were discussed.
试验结果表明，在优化操作参数条件下，除油率可达90%以上。
The experimental results show that the oil removal efficiency was more than 90% under optimum operation parameters.
本文研究了用接枝改性的尼龙纤维膜进行水中除油的各种影响因素。
In this paper some factors affecting the efficiency of removing oil from oily water by a grafted nylon fiber membrane were investigated.
APM可在高精度过滤，无泡沫过滤，和除油作业等领域得到推广。
The new APM bags can find applications in precision filtration, operations with non-foaming requirement, and trace oil removals.
表调剂、磷化液、涂料、胶粘剂、除油除锈、纺织印染助剂制造销售。
Table regulating, Lin Hua fluid, paint, Jiaonianji, apart rust, textile printing fertilizer manufacturing sales.
旋流器是一种新型的除油设备，它是利用离心力代替重力实现相的分离。
De-oiling hydrocyclone is a new type of equipment to separate oil from water making use of centrifugal force instead of gravity.
该方法简单、清晰，可方便地用于含水量小的污水除油板式分离器计算中。
This method is simple and clear, and can be used in calculation of oil-water separator with low oil content.
化学除油：在碱性溶液中借助皂化作用和乳化作用清除制件表面油污的过程。
The chemical oil: in the alkaline solution with the role of saponification and the emulsification cleared surface process of oil parts.
氢脆：由于浸蚀，除油或电镀等过程中金属或合金吸收氢原子而引起的脆性。
Hydrogen brittleness: because, in addition to the erosion oil or plating process such as metal and alloy hydrogen atom absorption and cause brittle.
本文结合国外专利技术，介绍了萃取法除油的原理、流程及萃取剂和设备的选择。
Refer to foreignpotented techniques, the principle of deoiling by extraction, technological process, and Seldrion of extraction solvent and equipment are introduced.
结果表明不同腐化缸中所含除油细菌的种类和数量不同，细菌的除油效果也不同；
The results show that the species and amount and oil-removing effects of the bacteria are different in the different jars.
介绍了FJ L - 40型气浮除油机结构、除油原理和气浮除油的影响因素。
FJL-40 type air-floated oil skimmer structure, oil removal principle and influence factor of air-floated oil removal are described.
针对当前地表水油污染具有大面积、低浓度的特点，应用筛选高效降油微生物除油。
In accordance with oil pollution surface water's character of large area and low concentration, high efficient bacteria have been chosen to degrade oil.
DTC具有净化作用快，除油功效高，适用于分离、重力沉降和浮选等水处理过程。
DTC is characterized by fast cleaning treatment, high-efficiency removing oil, suitable for water treating processes such as separation, gravity sedimentation and floatation.
通过对几种聚结填料除油性能的对比试验，探讨分析了聚结除油反应机理及其动力学。
The mechanism and reaction dynamics of coalescence were explored through the comparison experiment of oil removal performance of several coalescence fillers.
提出了磁化—高效斜浅层除油沉淀—管道自动过滤新工艺，并进行了工业性试验研究。
A new process of magnetization-lamella separating oil skimming-pipe automatic filter is introduced, on the basis of industrial experiments.
很少有干燥器供应商能够明确自己产品的除油能力，这有赖于油蒸气过滤器执行该任务。
There are few drier suppliers can determine their own products oil removal ability, it depends on oil filter to perform the task.
本公司是专门研制生产清洗、除锈除油、钝化、水处理剂及其它相关化工产品的化工企业。
The Company are to develop and produce specialized cleaning, rust removal, passivation, water treatment agents and other related chemical products chemical companies.
经动态模拟评定试验和现场应用结果表明：该方案具有良好的阻垢缓蚀性能和除油杀菌效果。
The medium dynamic simulated experiment and the application result show that the scheme has good corrosion and scale inhibition performance and has good efficiency to remove oil and bacteria.
电镀工艺中的封孔、振光、除油、酸洗等工序必须添加缓蚀剂，且低温封孔，以避免过腐蚀。
Corrosion inhibitor must be added in sealing, sanding, degreasing and pickling to avoid over-corrosion, and sealing should be operated at low temperature.
结果表明，该处理工艺完全适用于含油泥砂的除油，对油田生产以及环境保护都有重要意义。
Result shows that the technology is completely applicable to the oil removal in oil-contained silt and has important significance in oilfield production and environment protection.
应用推荐