本文给出了阻力试验结果和不确定分析。
Results of resistance test and uncertainty analysis are presented in this paper.
进行了较大尺度模型的静水阻力试验、规则波试验和不规则波试验。
The resistance test, the regular wave test and the irregular wave test of a larger scale model are carried out.
介绍煤岩切割阻力试验和预测公式，以供轮斗挖掘机设计计算使用和参考。
This paper discusses test and determination of the predicting formula for cutting resistance cf coal and rock and be referred to use for design calculation of bucket wheel excavator.
本文主要论述四种叉排钢制矩形翅片椭圆管簇的传热及阻力试验研究结果。
This paper mainly presents the results of experiments on heat transfer and pressuse drop of air flowing across four types of elliptical Finned-Tube banks .
0范围内进行了三体船静水阻力试验，分析了侧体不同位置对剩余阻力的影响。
0 is introduced, and the relationship between the position of side hull and the residuary resistance is investigated as well.
本文对两艘方形系数为0.67左右的单桨货船加装球鼻的阻力试验结果进行了分析。
The results of two models resistance tests for single screw cargo ship with block coefficient about 0.67, with and without bulb-bows, is analysed.
对照其模型阻力试验结果，提出了该形状物体的阻力近似计算公式并给出了相应的系数。
The coefficients of these formulas of resistance are also given according to the experimental result.
试验内容包括光体和全附体的阻力试验，试验的结果采用二因次换算法，验证了理论计算的可靠性。
The test results are expressed by quadric conversion, and the reliability of the theory calculation is validated.
并在土槽中进行了单轮叶动力性能试验、水田轮轮叶相互干扰试验、机耕船牵引阻力试验、滑板阻力试验和插秧机牵引性能试验。
This Paddy soil bin was successfully used for tests in the dynamic performance of a single blade-lug, the motion resistance of floating boats, and the performance of skids and rice transplanters.
本文基于埋设有测试元件的嵌岩桩原位试验，分析了在桩顶荷载作用下，嵌岩桩的桩侧阻力、桩端阻力的特征。
Based on the in-situ testing of rock-socked pile embedded with test components, the characteristics of the point resistance and skin resistance are studied in this paper.
通过单桩竖向抗压静载试验和动载试验，分析了静动载对桩身轴力分布、桩身侧摩阻力和基桩沉降的影响及其变化规律。
Distributive regularities of inner force of pile under static and dynamic load, the change of pile's side resistance, and settlement of piles are analyzed by static and dynamic load test.
通过发动机台架试验，研究进气系统阻力对柴油机性能的影响。
Influence of intake resistance on the engine performances based on the engine tests is investigated.
过滤式防微粒口罩对空气流呼吸阻力的试验方法。
Test method for airflow resistance of respiration of filtering particle respirator.
许多汽车性能试验均在底盘测功机上进行，而轮胎滚动阻力是影响测试精度的重要原因。
Many automotive performance tests are conducted on chassis dynamometer, while tyre rolling resistance is an important factor to affect measuring accuracy.
本文提出了一个确定阻力分配系数的方法，试验分析结果说明本方法是合理的。
This paper present a method determining resistance assignment coefficient, the analysis results on the test show that present method is reasonable.
试验分析数据相比，两者之间修正后的阻力系数误差在0.006以内。
The deviations of corrected drag coefficients of the two wind tunnel tests are within 0.006.
采用现行规范规定的对桩身承载力和地基土对桩的支承阻力两项的计算，确定嵌岩桩竖向抗压静载试验的试验荷载。
Based on the demand of present code, using the calculation of bearing capacity of pile shaft and subgrade bearing capacity for pile, vertical experimental load of embedded rock pile is ensured.
通过木排原型阻力的现场测试与相应的模型试验分析对比，确定了木排粗糙度附加系数的数值。
The value of additional coefficient of raft roughness is established through the comparative analysis of raft prototype resistance measurement on the spot and relevant model experiment.
对卧式热交换式方形分离器在不同风速和不同入口浓度下分离效率和阻力进行试验研究，并分析了运行工况分离性能。
An experimental study was conducted of the separation efficiency and separator resistance of a horizontal heat exchange mode based square separator under different air speeds and inlet concentrations.
试验中发现了若干表现密度与切削阻力关系分散性的某些特点的现象。
Some phenomena were noted during the tests indicating certain characteristics of the scatter of the density-cutting resistance relation.
本文叙述了对不同结构螺纹管阻力系数和传热性能的试验结果，并对试验结果进行了分析。
This paper gives an account of and analyses the experimental results of heat transfer and drag coefficient of the spiral tube of different construction.
介绍了试验状况、拖车速度和阻力测量设备。
Test condition, carriage speed, and resistance measurements are described.
计算得到的兴波阻力系数与试验结果结果相比，吻合良好。
Compared with model basin test data, the result of computation is accurate.
根据试验结果和建立的运动方程，获得阻力系数与圆管形状的关系，并计算了圆管所受到的拖曳力。
Based on the test results and movement equation established, the relationship between drag coefficient and tubular shape is obtained and the drag force imposed on pipe is calculated.
对滴状翅片管的传热及阻力性能进行了试验，给出了不同风速、温度下的试验结果。
Tests were conducted of the heat transfer and resistance performance of drop-shaped finned tubes and test results obtained under different air velocities and temperatures are presented.
采用油、水、水蒸气对波纹管换热器的传热和流动阻力性能进行了试验研究。
The heat transfer and flow resistance performance of corrugated tube heat exchanger were examined by oil, water, and steam.
在锅炉冷态试验中，进行了锅炉空床和不同料层厚度下的床层阻力特性试验，确定了锅炉的临界流化风量。
In cold test of boiler, resistance performance experiments of empty bed and different thickness were conducted, and the boiler's critical fluidized flow was determined.
对用于产生螺旋管流的圆管螺旋流起旋器的结构参数进行了分析，并对其阻力特性进行了理论分析和试验研究。
The structure parameters and resistance characteristics of spiral pipe flow generator which generates spiral flow in circle pipe were analyzed and investigated.
通过对小样放热及阻力的试验，得出不同迎面风速下的放热性能及空气侧阻力性能的关系。
Through these heat liberation and resistance tests obtained are the relationship of heat liberation performance under various frontal air speeds and the air side resistance performance.
通过对小样放热及阻力的试验，得出不同迎面风速下的放热性能及空气侧阻力性能的关系。
Through these heat liberation and resistance tests obtained are the relationship of heat liberation performance under various frontal air speeds and the air side resistance performance.
应用推荐